Junkosha - 4, 5 Series cables - Formable Interconnect
Coaxial cable assembly suitable for fixed wiring inside and between equipment used in the microwave band up to 100GHz (continuous operating temperature range: -30 to +85°C).
These cables have excellent formability (shape-retention capability) that make wiring work easy and exhibit superior loss characteristics compared to semi-rigid cables. Standard connectors are SMA (m) straight connectors, although other connectors can be used as required.
| Cable Type | Maximum Usable Frequencies | Standard Insertion Loss | Outer Cable Diameter (mm) | Continuous Operating Temperature (°C) | Assembly Length | Special Notes | ||
|---|---|---|---|---|---|---|---|---|
|
@18.5 GHz |
Maximum Frequency |
Minimum | Maximum | |||||
| MWX411 | 18.0 Ghz | 2.2 | - | 2.5 | -30~+85 | 100 | 5000 | Semi-rigid cable φ2.2 equivalent outer diameter |
| MWX412 | 1.4 | - | 4 | 100 | 5000 | Semi-rigid cable φ3.6 equivalent outer diameter | ||
| MWX441 | 40.0 GHz | 2.9 | 4.3 | 2.4 | 100 | 5000 | Semi-rigid cable φ2.2 equivalent outer diameter | |
| MWX461 | 67 GHz | 5.5 | 12 | 1.33 | -65~+125 | 400 | 2000 | Semi-rigid cable φ1.2 equivalent outer diameter |
| MWX511 | 18.0 GHz | 3.1 | - | 3 | -30~+85 | 100 | 5000 | Semi-flexible cable φ2.1 equivalent outer diameter |
| MWX512 | 2 | - | 2 | 100 | 5000 | Semi-flexible cable φ2.1 equivalent outer diameter | ||
This table shows catalog standard length availability, we can provide custom length upon request, please contact us.
Features
- Excellent formability.
- The 4 Series achieves lower insertion loss than semi-rigid cables with the same outer cable diameter.
- The 5 Series achieves lower insertion loss than semi-flexible cables with the same outer cable diameter.
- Can be bent around 5 times with no property changes.
Use
- Fixed wiring for communication equipment on base stations.
- Fixed wiring for research and development boards.
Document
More Product Information
- Broadest Model Selection: 6kW, 9kW, 12kW, 18kW, 24kW, 36kW, Additional standard models above 36kW, up to 250kW, are available.
- Standard 60V, 120V, 400V, 600V, 800V and 1000V Voltage Ratings
- PLW Models Offer Ultra-compact Footprint and Boasts one of the industry’s highest power densities, 18kW in 2U.
- Anti-condensation: Intelligent Fully-integrated Temperature Control Circuit and Solenoid Valve
- Standard LabWindows and LabVIEW Drivers and SCPI Command Set
- RoHS Compliant
- The LL137 Series provides a focused line of illumination in a passively cooled design.
- Provides a medium intensity level of 280kLux (working distance of 75mm)
- Pre-engineered for expandability in 6” (152mm) increments up to 96” (2.44m).
- Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input
Note: If only looking for white illumination, our LL167 Series provides a 74% brighter beam in a similar package.
- Three independent, isolated 1700W DC outputs, 5100W total
- 1U rack-mount chassis
- 9 output options
- Multi-language, intuitive, color touch panel control
- Global 3-Phase AC Input options for system phase balancing
- Active power factor correction (PFC)
- Multi-channel programmable sequencing, ramps, and delays
- Full remote control via Virtual Panels™ GUI
- Standard LXI Ethernet, USB, and RS232 control interfaces
- Optional GPIB control interface or isolated analog programming
- 8 frequency counter channels, 16 isolated digital I/O channels, 2 isolated DAC channels in a single card
- Single frequency measurement range that works from 0.05 Hz to 1 MHz
- Very stable TCXO base clock, 50 MHz ±1 ppm
- 195 kΩ Input impedance with selectable coupling (AC/DC)
- Wide differential input voltage range (±48 V) with up to 250 V working common mode voltage
- Programmable threshold and hysteresis levels with 1 mV resolution
- Support for quadrature encoder
- Isolated DIO channels with up to 60 V compliance
- Isolated and independent 16-bit DAC channels, configurable for voltage or current output
- The DL225 series of square coaxial lights features a modular heat sink and circuit design for enhanced performance, product availability and lead time.
- These coaxial lights are available in a wide variety of wavelengths from UV to IR.
- They provide intensities from 18kLux for the DL225-025 to approximately 50kLux for the larger models.
-
Redundant design with multiple signal paths built in for high-availability.
-
12 expansion slots in the 2U version and 5 expansion slots in the 1U variant.
-
Industry-first GPS integrity checking
-
Unique optical crosslink architecture for either Master-Slave hierarchical setups or Master-Master crosschecking and failover
-
2U version is operated by an intuitive touch-screen interface, a first for any master clock system.
-
All components are hot-swappable and are dual redundant.
-
The Output Signal modules are hot-swappable from the front and minimize the need to disconnect cables.
Junkosha, Inc.
Junkosha is a pioneer of sophisticated fluoropolymer application technologies across a broad selection of industries, including the microwave interconnect sectors.
Our mantra – indeed the name Junkosha – is based on three Japanese characters that spell out the fact “we contribute to society’s development through technology”. This is taken one step further in our relationship with customers, partners and suppliers whereby our mission is to “enable technology innovators” through our products and the way we do business.
Reflecting our corporate motto of “delivering unsurpassed value,” Junkosha continually focusses on activities that address the unmet needs of our customers worldwide. Across the company, Junkosha delivers products that are of the highest quality, this in turn calls for the highest performance and diligence from staff and partners. In order to realize this, Junkosha strives to anticipate customer needs while achieving complete customer satisfaction. Every day, we are challenged to “develop advanced technologies”, “improve our products’ capabilities", and “seek new applications”. We respond to our customer’s requirements quickly, responsively and cost effectively.
Contact Details
Junkosha Inc. Japan Office - Tokyo Business Center
15F Ochanomizu-Kyoun Bldg., 2-2 Kanda-Surugadai, Chiyoda-ku, Tokyo, 101-0062, Japan
Phone: +81-3-3518-6520
Fax: +81-3-3518-6523
Junkosha USA Inc. West Coast Office
2415 Campus Drive, Suite 140, Irvine, CA 92612, USA
Phone: +1-949-825-6177
Test & Measurement
Download Line Card
Document
