• Simplify cabling between cameras and vision computer through PoE support 
• Facilitate multi-camera configurations with two or four Gigabit Ethernet ports 
• Trigger multiple cameras simultaneously and reliably using hardware-assisted trigger-over-Ethernet (ToE) 
• Synchronize to automation devices in real-time through digital I/Os with hardware-assisted management 
• Deploy pre-licensed for GigE Vision support in Aurora software, formerly Matrox Imaging Software 
• Avoid the need for a separate hardware key through a license fingerprint for additional Aurora software features 
• Certified for use with GigE Vision systems

• 1-port VNA with frequency options from 1 MHz to 8 GHz / 20 GHz / 43.5 GHz
• Guaranteed performance to 43.5 GHz with Extended-KTM ports
• PC control takes advantage of external computer processing power and functionality
• Small and lightweight package enables direct connection to the DUT
• No on-board data storage eliminates the need for data purging in secure applications
• All ShockLine VNAs share common software supporting GUI and program compatibility
• Time domain with time gating option enables easier and faster fault identification
• Simultaneous Sweep enabling users to operate multiple (up to four) MS46131A VNAs concurrently in independent software instances, unlocking true parallel measurement execution

NEO X05 5080 PSI Adapters

• On-Off power switch
• 20 A Circuit Breaker
• 8’ Flexible Power Cord
• Outlets – (4) 5-20R

• 3ft.
• (2) fork terminals (current)
• (1) fork terminals (ground)
• (2) Shielded Banana (voltage)

The VTI Instruments 16-Channel bridge and strain gauge measurement instrument

• 24-bit, delta-sigma ADC, simultaneous sampling
• Programmable Sample Rate up to 128kSPS
• Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
• Voltage Excitation: 0.5V to 10V
• Current Excitation: 0.46mA
• 2-Wire & 4-Wire Ohms/RTD
• Bridge Zero Balancing
• Built-In-Self-Test (BIST)
• Strain Lead Wire Calibration
• Shunt Calibration: 50kΩ, 100kΩ & External provided by User
• TEDS Support
• LXI Ethernet Interface
• IEEE-1588 Synchronization
• Power over Ethernet (PoE) or 10–50 V DC input
• Built-in Parallel Data Streaming
• Full-featured Embedded Web Interface
• Compact 1U Half-rack Form Factor

The VTI Instruments 16-Channel isolated high voltage measurement instrument

• 24-bit SAR ADC per Channel
• 128k samples/second/channel sample rate
• 1000V channel-channel isolation
• 500V channel-ground isolation
• Input voltage ranges peak: ±420V/±10V/±1V
• Data logger acquisition mode
• 3-Pin screw terminal input connector
• LXI ethernet interface
• IEEE-1588 synchronization
• Power over Ethernet (PoE+) or 12– 50 V DC input
• Simultaneous data streaming
• 8-bit bank isolated digital I/O
• Full-featured embedded web interface
• Compact 1U half-rack form factor

• Measuring device for large extrusion tools up to 35 mm (1.37“) hole diameter 
• Automated measurement process 
• Focus indicator allows you to easily adjust the focus 
• Homogeneous transmitted light illumination - made by iiM GmbH - for the ideal presentation of the area to measured 
• The influence of the user is reduced to a minimum 
• Robust, ergonomic design 
• Ideal addition to the 2-camera system VCPEx+

NEO 60X Series

• Single-mode fiber with FC/PC connector
• Unique line uniformity and μ-optics for thin lines ( <15 μm [1/e²] )
• Red, green and blue wavelengths
• Optical output power up to 35 mW
• < 15 μm bei FWHM
• M2 < 1.05
• Analog and simultaneous TTL modulation up to 200 kHz
• Fail-safe for critical applications (e. g. medical)
• OEM-version without housing and TEC (PCB-version)