• Measuring device for large extrusion tools up to 35 mm (1.37“) hole diameter 
• Automated measurement process 
• Focus indicator allows you to easily adjust the focus 
• Homogeneous transmitted light illumination - made by iiM GmbH - for the ideal presentation of the area to measured 
• The influence of the user is reduced to a minimum 
• Robust, ergonomic design 
• Ideal addition to the 2-camera system VCPEx+

• 600 MHz of instantaneous bandwidth per channel
• Timing synchronization up to 16 channels
• Link Emulation including:
  • Phase continuous delay, Doppler, and attenuation changes
  • AWGN and Eb/No
  • 12 tap (path) multipath fading with Rayleigh, Rician & CW. Angle of Arrival (AOA), k-factor, and correlation controls
  • RF frequency agile up/down converters
• Payload Emulation including:
  • IMUX/OMUX amplitude and group delay distortion
  • Amplifier Compression (AM/AM and AM/PM)
  • Phase Noise
• Static and dynamic link emulation
• Ephemeris data generation using SATGEN
• Remote instrument control through ACEClient application

With their domed shape, LUMIMAX® LED dome lights generate a diffused light that falls on the test object from all directions, achieving completely shadow-free illumination.

Typical applications are the inspection of reflective or mirroring materials. With a LED dome light, even complex or curved surfaces can be illuminated homogeneously.

LED dome lights are extremely well suited for standard-compliant reading and verification of two-dimensional codes.

• Preparation and Post-Mission Data Retrieval and Replay
• IRIG-106 CH10 Data Replay and Configuration of Display
• Simultaneous Replay of up to 4 Cartridges for Mass Debriefing

NEO X01 3000 PSI Adapters

NEO 3XX Adapters

NEO X05 5080 PSI Adapters

The VTI Instruments 16-Channel bridge and strain gauge measurement instrument

• 24-bit, delta-sigma ADC, simultaneous sampling
• Programmable Sample Rate up to 128kSPS
• Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
• Voltage Excitation: 0.5V to 10V
• Current Excitation: 0.46mA
• 2-Wire & 4-Wire Ohms/RTD
• Bridge Zero Balancing
• Built-In-Self-Test (BIST)
• Strain Lead Wire Calibration
• Shunt Calibration: 50kΩ, 100kΩ & External provided by User
• TEDS Support
• LXI Ethernet Interface
• IEEE-1588 Synchronization
• Power over Ethernet (PoE) or 10–50 V DC input
• Built-in Parallel Data Streaming
• Full-featured Embedded Web Interface
• Compact 1U Half-rack Form Factor

• Up to 96 differential channels per full rack mainframe 
• Constantly monitor input signals for fault conditions 
• Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths 
• Inputs can be masked, inverted, and combined to produce interrupts 
• Can be used as a time stamp module and as a digital I/O 
• Programmable debounce circuitry prevents erroneous readings 
• 10 V and 100 V input ranges 
• On-board memory stores events with IEEE 1588 timestamps 
• Synchronize reading of input states with other scanned analog channels