• 2 in 1: device contains the Hot Set Test as well as the Heat Pressure Test
• Robust and compact set including the device and an equipment case
• Possibility to attach a thermometer directly near the sample
• Measurement according to the cable standards IEC 60811 -507 (Hot Set Test) and IEC 60811 -508 (Heat Pressure Test) regarding sample attachment and weight attachment
• Precise choice of weights due to practical containers
• Simultaneous measurement of up to 3 cable or tube samples

NEO 50X Series

NEO X05 5080 PSI Adapters

• On-Off power switch
• 20 A Circuit Breaker
• Inlet - NEMA L6-20
• Outlets – NEMA L6-20R

• 3ft.
• (2) fork terminals (current)
• (1) fork terminals (ground)
• (2) Shielded Banana (voltage)

• Up to 96 differential channels per full rack mainframe 
• Constantly monitor input signals for fault conditions 
• Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths 
• Inputs can be masked, inverted, and combined to produce interrupts 
• Can be used as a time stamp module and as a digital I/O 
• Programmable debounce circuitry prevents erroneous readings 
• 10 V and 100 V input ranges 
• On-board memory stores events with IEEE 1588 timestamps 
• Synchronize reading of input states with other scanned analog channels

The VTI Instruments 16-Channel isolated high voltage measurement instrument

• 24-bit SAR ADC per Channel
• 128k samples/second/channel sample rate
• 1000V channel-channel isolation
• 500V channel-ground isolation
• Input voltage ranges peak: ±420V/±10V/±1V
• Data logger acquisition mode
• 3-Pin screw terminal input connector
• LXI ethernet interface
• IEEE-1588 synchronization
• Power over Ethernet (PoE+) or 12– 50 V DC input
• Simultaneous data streaming
• 8-bit bank isolated digital I/O
• Full-featured embedded web interface
• Compact 1U half-rack form factor

• Measuring device for large extrusion tools up to 35 mm (1.37“) hole diameter 
• Automated measurement process 
• Focus indicator allows you to easily adjust the focus 
• Homogeneous transmitted light illumination - made by iiM GmbH - for the ideal presentation of the area to measured 
• The influence of the user is reduced to a minimum 
• Robust, ergonomic design 
• Ideal addition to the 2-camera system VCPEx+

• 1-port VNA with frequency options from 1 MHz to 8 GHz / 20 GHz / 43.5 GHz
• Guaranteed performance to 43.5 GHz with Extended-KTM ports
• PC control takes advantage of external computer processing power and functionality
• Small and lightweight package enables direct connection to the DUT
• No on-board data storage eliminates the need for data purging in secure applications
• All ShockLine VNAs share common software supporting GUI and program compatibility
• Time domain with time gating option enables easier and faster fault identification
• Simultaneous Sweep enabling users to operate multiple (up to four) MS46131A VNAs concurrently in independent software instances, unlocking true parallel measurement execution