Dualos - Fittings - NEO 601C Series
NEO X01 3000 PSI Adapters
|
Part Number |
Port Size 1 |
Thread End [1] |
Port Size 2 |
Thread End [2] |
A |
B |
D |
|
NEO 601C-P-04 |
4, 12 |
JIC-37 Degree |
4 |
0.4375-20 UNJF Class 3B |
2.01 |
0.40 |
1.88 |
|
NEO 601C-P-06 |
6, 12 |
JIC-37 Degree |
6 |
0.5625-18 UNJF Class 3B |
2.11 |
0.49 |
1.88 |
| NEO 601C-P-08 |
8, 12 |
JIC-37 Degree |
8 |
0.7500-16 UNJF Class 3B |
2.22 |
0.56 |
1.88 |
|
NEO 601C-P-10 |
10, 12 |
JIC-37 Degree |
10 |
0.8750-14 UNJF Class 3B |
2.37 |
0.66 |
2.25 |
| NEO 601C-P-12 |
12 |
JIC-37 Degree |
12 |
1.0625-12 UNJ Class 3B |
2.44 |
0.70 |
2.25 |
|
NEO 601C-P-16 |
12 |
JIC-37 Degree |
16 |
1.3125-12 UNJ Class 3B |
2.63 |
0.79 |
2.50 |
|
NEO 601C-P-20 |
12 |
JIC-37 Degree |
20 |
1.6250-12 UNJ Class 3B |
2.81 |
- |
2.70 |
*Approximate Dimensions [inches]
More Product Information
All plugs ship with Skydrol (BMS3-11) Compatible O-Rings, Viton® Cuff and Four Metal Clamps. Parts in compliance with all SMOT document requirements.
- Simplify cabling between cameras and vision computer through PoE support
- Facilitate multi-camera configurations with two or four Gigabit Ethernet ports
- Trigger multiple cameras simultaneously and reliably using hardware-assisted trigger-over-Ethernet (ToE)
- Synchronize to automation devices in real-time through digital I/Os with hardware-assisted management
- Deploy pre-licensed for GigE Vision support in Aurora software, formerly Matrox Imaging Software
- Avoid the need for a separate hardware key through a license fingerprint for additional Aurora software features
- Certified for use with GigE Vision systems
- NEO 941 parts are AS5836 compatible (Clam Shell Clamps not Included)
- NEO 942 parts are AS1653 compatible (Clam Shell Clamps not Included)
- On-Off power switch
- 20 A Circuit Breaker
- 8’ Flexible Power Cord
- Outlets – (4) 5-20R
Test Tap:
- 3ft.
- (2) fork terminals (current)
- (1) fork terminals (ground)
- (2) Shielded Banana (voltage)
- 24-bit, delta-sigma ADC, simultaneous sampling
- Programmable Sample Rate up to 128kSPS
- Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
- Voltage Excitation: 0.5V to 10V
- Current Excitation: 0.46mA
- 2-Wire & 4-Wire Ohms/RTD
- Bridge Zero Balancing
- Built-In-Self-Test (BIST)
- Strain Lead Wire Calibration
- Shunt Calibration: 50kΩ, 100kΩ & External provided by User
- TEDS Support
- LXI Ethernet Interface
- IEEE-1588 Synchronization
- Power over Ethernet (PoE) or 10–50 V DC input
- Built-in Parallel Data Streaming
- Full-featured Embedded Web Interface
- Compact 1U Half-rack Form Factor
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
- 600 MHz of instantaneous bandwidth per channel
- Timing synchronization up to 16 channels
- Link Emulation including:
- Phase continuous delay, Doppler, and attenuation changes
- AWGN and Eb/No
- 12 tap (path) multipath fading with Rayleigh, Rician & CW. Angle of Arrival (AOA), k-factor, and correlation controls
- RF frequency agile up/down converters
- Payload Emulation including:
- IMUX/OMUX amplitude and group delay distortion
- Amplifier Compression (AM/AM and AM/PM)
- Phase Noise
- Static and dynamic link emulation
- Ephemeris data generation using SATGEN
- Remote instrument control through ACEClient application
Dualos
Website
787 SMOT compliant caps and plugs for hydraulic, fuel or DI water lines. 3000 PSI & 5000 PSI fine and extra fine threaded aircraft to JIC adaptors
