The VectorStar ME7838 Series broadband VNA offers the widest available single frequency sweep from 70 kHz to 110, (ME7838AX to 125), (ME7838EX to 125), to 145 GHz, and to 220 GHz with mmWave bands to 1.1 THz. 

The VectorStar ME7838x4 broadband system VNA offers the widest available 4-port single sweep measurements from 70 kHz to 110, 125, 145, and 150 GHz with mmWave bands up to 1.1 THz

2-port VNA with frequency options from 1 MHz to 8 GHz / 20 GHz / 43.5 GHz (options for 20, 50, and 100 meters) Extend remote ports 100 meters apart with PhaseLync synchronization Small and lightweight ports enable direct connection to DUT eliminating long cable runs Guaranteed performance to 43.5 GHz with Extended-K™ ports PC control takes advantage of external computer processing power and functionality No on-board data storage makes use in secure applications more convenient Common ShockLine control software delivers powerful debug and test capabilities PhaseLync control module MN25132A

MP1900A series is an 8-slot modular, high-performance BERT supporting all-in-one Physical layer measurements of both high-speed network interfaces as NRZ and PAM4, and PCI Express/USB, bus interfaces

Customized built-in 4ch sampling oscilloscope and 4ch BERT Fast measurement and high performance shorten test times, improve yields, and cut capital infrastructure costs Built-in PC for stable fast performance

9 kHz to 9/14/20/26.5/32/43.5/54 GHz DANL: -164 dBm (with preamp) TOI: +20 dBm (typical) Analysis bandwidth: 150 MHz Amp range: DANL to +30 dBm Phase noise at 1 GHz: -110 dBc/Hz @ 100 kHz offset (typical) Demodulation: 5GNR, LTE FDD/TDD, RF, and modulation quality plus SSB signal analysis Resolution bandwidth (RBW): 1 Hz to 10 MHz Sweep Speed: 40 GHz/second (full span) RTSA bandwidth: 22, 55, 120, 150 MHz (option dependent) Amplitude accuracy: < 14 GHz ± 1.3 dB (± 0.5 dB, typical) Zero span with 60 ns minimum span IQ capture and streaming AM/FM modulation quality measurements Built-in PDF/HTML report generation EMF Measurements

Frequency Ranges: 9 kHz to 9 GHz, 13 GHz, and 20 GHz Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Mask, Spurious Emissions, Field Strength 3G and 4G Measurement options for LTE (FDD & TDD), CDMA, W-CDMA, WiMAX, GSM, and TD-SCDMA Interference Analyzer: Spectrogram, Signal Strength, RSSI, Mapping Dynamic Range: > 106 dB in 1 Hz RBW @ 2.4 GHz DANL: –164 dBm in 1 Hz RBW @ 1 GHz preamp On Phase Noise: –112 dBc/Hz @ 10 kHz offset at 1 GHz 1 Hz to 10 MHz Resolution Bandwidth (RBW) Tracking Generator up to 20 GHz PIM Hunting PIM Alert (a downloadable easyTest™ script) Standard three-year warranty (battery one-year warranty)

First portable spectrum analyzer to provide continuous frequency coverage to 170 GHz Broadband mmWave capabilities for radio astronomy, automotive radar, wireless backhaul, 802.11ad, satcom, and more Ultraportable form factor enables measurements right at the device under test Measure: channel power, adjacent channel power, occupied bandwidth Patented NLTL technology provides > 100 dB dynamic range -141/-136/-129/-122 dBm DANL to 90/110/145/170 GHz ( Spectrum Master MS2762A) Up to 6 traces, 3 trace detectors, and 12 markers Standard three-year warranty

Provides ±0.3 dB (typ.) total level accuracy 9 kHz to 3.6 GHz/6 GHz/13.5 GHz/26.5 GHz/43 GHz frequency range Various options can be installed Spectrum analyzer supporting built-in signal analyzer with FFT technology, vector signal generator, analog signal generator and audio analyzer (options) Offers modulation analysis, such as LTE, W-CDMA, WLAN, Vector Modulation and Analog Modulation (with optional software) Excellent eco-friendly product with low power consumption of 110 VA min.

Frequency range of 9 kHz to 3.6 GHz/6 GHz/26.5 GHz/44.5 GHz; 44.5 GHz max. built-in preamp option Best close-in phase noise performance in middle range signal analyzer/spectrum analyzer:  –123 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with all frequency models)  –138 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with 3.6 GHz and 6 GHz models, meas.)  –140 dBc/Hz (at 150 MHz center frequency, 10 kHz offset frequency with 3.6 GHz and 6 GHz models, meas.) 31.25 MHz analysis bandwidth (standard); 125 MHz max. (option) All-in-one solution with built-in signal generator option supports TRx tests (with 3.6 GHz and 6 GHz models)

For next-generation broadband and multicarrier communication system, such as 5G mobile and broadcast satellites

1-port VNA with frequency options from 150 kHz to 6 GHz External PC control enables control of multiple ShockLine MS46121B devices in parallel for excellent multisite throughput Very compact package allows for direct connection to the DUT Scalar transmission measurements in a (1-to-1) or (1-to-n) configuration No on-board data storage eliminates the need for data purging in secure applications Standard bandpass time domain with time gating enables easier and faster fault identification A common GUI interface within the ShockLine family reduces switching costs between models