Product Finder

Displaying 1 - 6 of 6
Product Results:
PowerGridm - PG BXM – Spare Battery Module 24 VDC – Mobile Shelter UPS

PowerGridm - PG BXM – Spare Battery Module 24 VDC – Mobile Shelter UPS

Hot Swap Lithium Iron Phosphate (LIP) Cold PakTM design. Exhibits less than 10° rise over ambient on full discharge. Weights less than 8 Lbs...
Powergridm - PG BXM – Spare Battery Module 48 VDC – UAV Flight control UPS

Powergridm - PG BXM – Spare Battery Module 48 VDC – UAV Flight control UPS

Hot Swap Lithium Iron Phosphate (LIP) Cold PakTM design. Exhibits less than 10 degrees temperature rise over ambient on full discharge. Weights...
PowerGridm - PG1000 – Spare Battery Module 48 VDC

PowerGridm - PG1000 – Spare Battery Module 48 VDC

Hot Swap Lithium Iron Phosphate (LIP) Cold PakTM design. Exhibits less than 10° rise over ambient on full discharge. Weights less than 5 Lbs...
Powergridm - PG1500 – Spare Battery Module 48 VDC – Mobile Shelter Uninterruptible Power Supply

Powergridm - PG1500 – Spare Battery Module 48 VDC – Mobile Shelter Uninterruptible Power Supply

Hot Swap Lithium Iron Phosphate (LIP) Cold PakTM design. Exhibits less than 10° rise over ambient on full discharge. Weights less than 8 Lbs...
Powergridm - PG3000 – Spare Battery Module 48 VDC – Military Battery Backup System

Powergridm - PG3000 – Spare Battery Module 48 VDC – Military Battery Backup System

Hot Swap Lithium Iron Phosphate (LIP) Cold PakTM design. Exhibits less than 10° rise over ambient on full discharge. Weights...
Powergridm - PG800 UPS Spare Battery Module 24 VDC – Mobile Shelter UPS

Powergridm - PG800 UPS Spare Battery Module 24 VDC – Mobile Shelter UPS

Hot Swap Lithium Iron Phosphate (LIP) Cold Pack design. Exhibits less than 10° rise over ambient on full discharge. Weights less than 3Lbs...

  • IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
  • Designed to withstand 3 meter drop (with holster)
  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
  • MSHA approval
  • Limited lifetime warranty


Dual pressure/vacuum capability
Bench mount design
Built-in handpump as pressure/vacuum source
High quality needle valve for fine control
Test port adapters that require no PTFE tape or wrenches


  • Digital multimeter designed specifically for HVAC professionals
  • Includes built-in thermometer to measure temperature from -40°C to 400°C (-40°F to 752°F)
  • Provides microamps to test flame sensors
  • Features low input impedance to helps prevent false readings due to ghost voltage
  • Presents a large white LED backlight for working in poorly lit areas


  • Voltbeat™ technology and continuous self-test – so you always know it's working
  • 20 V to 90 V AC control circuit detection
  • Upon detection, tip glows and beeper sounds
  • CAT IV 1000 V for added protection
  • Expanded range also available: 90 V AC to 1000 V AC
  • Two-year warranty
  • Batteries included
  • On/Off button
  • Audible/Silent


A powerful, complete hydraulic pressure calibration system to cover a wide workload
Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include:
  • No weights to load and unload, transport or send out for calibration
  • Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
  • No piston-cylinder changes
  • No significant sensitivity to level or vibration
  • Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
  • Operates in any unit of measure, switching easily from one unit to the next
The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers.