Product Finder

Displaying 1 - 1 of 1
Product Results:
GET Engineering - NTDS cPCI Parallel Interface Adapter

GET Engineering - NTDS cPCI Parallel Interface Adapter

Key Features 100% MIL‑STD‑1397 Compliant NTDS Type A/B/C/H Short Circuit Protection on all Outputs Internal loop‑back...

  • Measures:
    • Single, split, or three phase loads
    • Voltage, current, and frequency
    • Active power, non-active power, and power factor
    • Total harmonic distortion
  • Wireless data collection or internal memory sufficient for 1 week with 1 second data intervals
  • Remotely monitor real-time and historical power variable data
  • Visualize data with software trending, graphing, and timeboxing
  • Auto-generated alarms when power variables deviate from pre-set thresholds
  • Power options: Battery, power supply, or power from the measurement line
  • Size: (W x H x D) 7.8 in. x 6.6 in. x 2.2 in.
  • IP Rating: IP 50; IEC 60529


  • True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
  • 61 mm jaw opening
  • Highest resolution of 1 μA, measure up to 60 A
  • Selectable filter function removes unwanted noise
  • Max/Min/Average readings and hold function
  • Forward-facing LED worklight for use in dark wiring cabinets
  • Backlit display; auto backlight off and auto power off for extended battery life
  • CAT III 600V safety rating


  • Two electrically isolated inputs
  • CAT III 1000V / CAT IV 600V safety rated
  • 100 MHz bandwidth model
  • 1.25 GS/s
  • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
  • Dedicated 5000 Count digital multimeter
  • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
  • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
  • TrendPlot, trend measurement readings for up to 22 days
  • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP-51 rated for dust and drip proof to withstand harsh environments
  • Isolated USB ports for memory devices and PC connectivity
  • Li-Ion battery for extended operating timespan
    • Up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
    • Charge spare battery using optional external battery charger EBC290
  • Easy-access battery door to make it easy to swap batteries
  • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock


  • True-RMS accuracy with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording give you the results you need.
  • Fluke-i400 AC 400A Current Clamp turns the 289 into a clamp meter.
  • Safety rated CAT III 1000 V, CAT IV 600 V meter to get you home safely from the job.


The Fluke t3000 FC Wireless K-Type Temperature Module wirelessly relays measurements to other Fluke Connect® enabled master units, listed below:
  • Fluke 3000 FC DMM
  • Fluke Ti200/300/400 Infrared Camera
  • PC via optional pc3000 FC Adapter
  • Fluke Connect Mobile app
With the Fluke t3000 FC Wireless K-Type Temperature Module you can:
  • Use as a standalone meter or as part of the system
  • Logging function for recording and saving up to 65,000 readings