Product Finder

Displaying 1 - 20 of 20
Product Results:
GET Engineering - Airborne NTDS over Ethernet Systems

GET Engineering - Airborne NTDS over Ethernet Systems

Key Features Two NTDS Parallel MIL-STD-1397C Type A/B/C/H Channels Two Ethernet 10/100/1000 BASE-T RS232 ...
GET Engineering - ATDS over Ethernet Systems

GET Engineering - ATDS over Ethernet Systems

Hardware Features Single Board Computer (SBC) Intel i7/i5/i3 or Atom processor 8 GB dual channel DDR3 SDRAM...
GET Engineering - Hardened NTDS over Ethernet Systems

GET Engineering - Hardened NTDS over Ethernet Systems

Key Features 100% MIL‑STD‑1397C Compliant NTDS Type A, B, C, H NTDS Type D or E Field...
GET Engineering - NTDS cPCI Parallel Interface Adapter

GET Engineering - NTDS cPCI Parallel Interface Adapter

Key Features 100% MIL‑STD‑1397 Compliant NTDS Type A/B/C/H Short Circuit Protection on all Outputs Internal loop‑back...
GET Engineering - NTDS ISA Parallel Interface Adapter

GET Engineering - NTDS ISA Parallel Interface Adapter

Key Features 100% 100% MIL‑STD‑1397C Compliant NTDS Type A, B, C, H Short Circuit Protection on all Outputs Fail safe...
GET Engineering - NTDS ISA Type E (LLS) Interface Adapter

GET Engineering - NTDS ISA Type E (LLS) Interface Adapter

Key Features 100% MIL‑STD‑1397C Compliant NTDS Type E, Low level Serial Full‑duplex 16 or 32‑bit transfers Internal loop‑...
GET Engineering - NTDS Optical Converter

GET Engineering - NTDS Optical Converter

Key Hardware Features Front Panel LED for Adapter Status Diagnostic Connector on Front Panel Short Circuit protection on all Outputs...
GET Engineering - NTDS PC/104+ Parallel Interface Adapter

GET Engineering - NTDS PC/104+ Parallel Interface Adapter

Key Hardware Features 100% MIL‑STD‑1397C Compliant NTDS Type A, B, C, H Full‑duplex 16 or 32‑bit transfers Internal loop‑...
GET Engineering - NTDS PC/104+ Type D Interface Adapter

GET Engineering - NTDS PC/104+ Type D Interface Adapter

Key Hardware Features 100% MIL‑STD‑1397C Compliant 16 or 32‑bit transfers Internal loop‑back capability Passive Tap Mode...
GET Engineering - NTDS PC/104+ Type E Interface Adapter

GET Engineering - NTDS PC/104+ Type E Interface Adapter

Key Hardware Features 100% MIL‑STD‑1397C Compliant NTDS Type E Low Level Serial Full‑duplex 32‑bit transfers Internal...
GET Engineering - NTDS PCI Parallel Interface Adapter

GET Engineering - NTDS PCI Parallel Interface Adapter

Key Hardware Features 100% MIL‑STD‑1397C Compliant NTDS Type A/B/C/H Full‑duplex 16 or 32‑bit transfers...
GET Engineering - NTDS PCI Type E (LLS) Interface Adapter

GET Engineering - NTDS PCI Type E (LLS) Interface Adapter

Key Hardware Features 100% MIL‑STD‑1397C Compliant NTDS Type E Low Level Serial Full‑duplex 16 or 32‑bit transfers...
GET Engineering - NTDS VME Parallel Interface Adapter

GET Engineering - NTDS VME Parallel Interface Adapter

Key Features 100% MIL‑STD‑1397C Compliant NTDS Type A/B/C/H Full‑duplex 8, 16 or 32‑bit transfers Reconfigurable to...
GET Engineering - NTDS VME Serial D Interface Adapter

GET Engineering - NTDS VME Serial D Interface Adapter

Key Features 100% MIL‑STD‑1397C Compliant NTDS Type D Short circuit protection on all outputs Fail safe input operation...
GET Engineering - NTDS VME Type E (Low Level Serial) Interface Adapter

GET Engineering - NTDS VME Type E (Low Level Serial) Interface Adapter

Key Features 100% MIL‑STD‑1397C Compliant NTDS Type E (Low Level Serial) Parity and ID control Reconfigurable to support...
GET Engineering - PCIe NTDS Parallel Adapter

GET Engineering - PCIe NTDS Parallel Adapter

Key Hardware Features User controlled activity LEDs GET NTDS ASICs to ensure strict MIL‑STD‑1397 timing Onboard timers for Command,...
GET Engineering - PCIe NTDS Serial Type D

GET Engineering - PCIe NTDS Serial Type D

Key Hardware Features NTDS Type D User controlled activity LEDs Full-duplex 16 or 32-bit transfers PIO Single Word...
GET Engineering - PCIe NTDS Serial Type E (Low Level Serial)

GET Engineering - PCIe NTDS Serial Type E (Low Level Serial)

Key Hardware Features NTDS Type E Low Level Serial User controlled activity LEDs Full-duplex 16 or 32-bit transfers PIO Single Word Transfers...
GET Engineering - Ruggedized Conduction Cooled NTDS PMC Parallel

GET Engineering - Ruggedized Conduction Cooled NTDS PMC Parallel

Key Features Common API across multiple operating systems Memory Mapped Address Space Independent FPGA‑controlled DMA...
GET Engineering - Ruggedized Conduction Cooled NTDS PMC Serial Adapter

GET Engineering - Ruggedized Conduction Cooled NTDS PMC Serial Adapter

Key Features Common API across multiple operating systems Memory Mapped Address Space Independent FPGA‑controlled DMA Channels...

  • Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
  • TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
  • Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
  • Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
  • Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
  • LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
  • Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
  • Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
  • Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
  • Save multiple logging sessions before PC download is necessary.
  • Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
  • On board help screens for measurement functions. Unsure about a function - go to that function and press the "i" button.
  • Real time clock for automatic time stamping of saved readings.
  • Relative mode to remove test lead resistance from low ohms or capacitance measurements.
  • True-RMS AC voltage and current for accurate measurements on non-linear signals.
  • Measure up to 10 A (20 A for 30 seconds).
  • 100 mF capacitance range.
  • Peak capture to record transients as fast as 250 μs.
  • Premium test leads and alligator clips included.
  • Amp jack plugs included.
  • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
  • FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
  • Limited lifetime warranty.


  • Versatile laser distance meter that instantly measures up to 100 meters (330 feet) with one-button point-and-click operation
  • Quickly calculates area (square feet/meters) and volume
  • Includes 180° inclination sensor for leveling and height tracking
  • Offers enhanced Pythagoras calculation for determining distance indirectly from three other measurements


Installs and grounds in less than 5 minutes
Save time with quick and easy installation with the CV Series – 5 minutes or less.
  • One technician
  • One hole with standard Greenlee® punch
  • Panel door does not need to be removed
  • Grounds instantly to metal enclosure with patent-pending AutoGround™ process
  • Maintains panel arc test ratings up to 63kA when properly installed
Work more efficiently with Fluke ClirVu® CV201 50 mm (2 in) Infrared Windows
  • NFPA 70E processes significantly reduced due to less work permit requirements
  • Faster and more comfortable inspections because full PPE is often not required
  • Reduce the risk of arc-flash and electrocution, increase the safety of your personnel and reduce the time and cost of preventive maintenance
  • CV201 is Torture Tested™ to the highest arc blast test ratings IEEE C37.20.7: 63 kA Arc tested at KEMA, UL 50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE
  • Convenience of both quick turn or security keyed access


Measure, graph and record three sensor types with one tool
The 1524 Reference Thermometer measures, graphs, and records PRTs, thermocouples, and thermistors. This thermometer readout delivers exceptional accuracy, wide measurement range, logging, and trending, all in a handheld tool you can take anywhere.
The 1524 lets you handle field applications, laboratory measurements, and data logging with ease. And with the dual channel measurement capabilities of the model 1524, you can do twice the work in half the time.
Three sensor types

  • PRTs: –200 °C to 1000 °C
  • Thermocouples –200 °C to 2315 °C
  • Precision thermistors: –50 °C to 150 °C

Accuracy

  • PRTs: up to ±0.011 °C
  • Thermocouples: ±0.24 °C for J,K,L,M
  • Precision thermistors: ±0.002 °C

Fast mode

  • PRTs: 0.45 seconds per sample
  • Thermocouples: 0.3 seconds per sample
  • Precision thermistors: 0.3 seconds per sample

Graphical display

  • 128x64 backlit LCD graphic display
  • Plot and scale trends in real time
  • Simultaneous dual channel readings


Fluke 789 Temperature Kit features:

  • Unique new wireless measurement logging capability
  • Temperature measurement from -200 °C to 1372 °C using the t3000 FC
  • 24 V Loop power supply
  • HART mode setting with loop power (adds 250 ohm resistor)
  • 100% larger dual display
  • 1200 ohm drive capability on mA source
  • Enhanced backlight with two brightness settings
  • 0% to 100% mA Span Check buttons to toggle between 4 and 20 mA
  • Infrared I/O serial port compatible with
  • FlukeView® Forms Software Version 2.1
  • Externally accessible fuses for easy replacement

These 787 features are also included in the 789:

  • DMM designed to meet 1000 volt IEC 1010 CAT III standards
  • Precision 1000 V, 440 mA True-RMS digital multimeter
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode test and continuity beeper
  • Simultaneous mA and% of scale readout
  • 20 mA DC current source/loop calibrator/ simulator
  • Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
  • Externally accessible battery for easy battery changes