Product Finder

Displaying 1 - 6 of 6
Product Results:
Amplifier Research - ATH200M1G - 200 - 1000 MHz, 5000 Watt input power, High Gain Horn Antenna with Heavy Duty Tripod

Amplifier Research - ATH200M1G - 200 - 1000 MHz, 5000 Watt input power, High Gain Horn Antenna with Heavy Duty Tripod

The Model ATH200M1G high-gain horn antenna exhibits increasing gain with increasing frequency (up to 18dB at 1000MHz).  
Amplifier Research - ATH200M1G-1 - 200 - 1000 MHz, 10,000 Watt input power, High Gain Horn Antenna

Amplifier Research - ATH200M1G-1 - 200 - 1000 MHz, 10,000 Watt input power, High Gain Horn Antenna

The Model ATH200M1G-1 high-gain horn antenna exhibits increasing gain with increasing frequency (up to 18dB at 1000MHz).  
Amplifier Research - ATH2G18 - 2 - 18 GHz, 300 Watt CW, High Gain Horn Antenna

Amplifier Research - ATH2G18 - 2 - 18 GHz, 300 Watt CW, High Gain Horn Antenna

With a minimum gain of 6dB over isotropic, the Model ATH2G18 supplies the high intensity fields necessary for RFI/EMI field testing within and beyond the confines of a shielded room....
Amplifier Research - ATH2G8A-1 - 2.5 - 7.5 GHz, 12,000 Watt input power, High Gain Horn Antenna

Amplifier Research - ATH2G8A-1 - 2.5 - 7.5 GHz, 12,000 Watt input power, High Gain Horn Antenna

Antenna 2.5–7.5 GHz  
Amplifier Research - ATH400M1G - 400 - 1000 MHz, 3000 Watt input power, High Gain Horn Antenna

Amplifier Research - ATH400M1G - 400 - 1000 MHz, 3000 Watt input power, High Gain Horn Antenna

M1 Antenna 400MHz—1000MHz  
Amplifier Research - ATH800M6G - 0.8 - 6 GHz, 2300 Watt input power, High Gain Horn Antenna

Amplifier Research - ATH800M6G - 0.8 - 6 GHz, 2300 Watt input power, High Gain Horn Antenna

M1-M4 Horn Antenna 0.8GHz—6GHz  

Fluke 789 Temperature Kit features:

  • Unique new wireless measurement logging capability
  • Temperature measurement from -200 °C to 1372 °C using the t3000 FC
  • 24 V Loop power supply
  • HART mode setting with loop power (adds 250 ohm resistor)
  • 100% larger dual display
  • 1200 ohm drive capability on mA source
  • Enhanced backlight with two brightness settings
  • 0% to 100% mA Span Check buttons to toggle between 4 and 20 mA
  • Infrared I/O serial port compatible with
  • FlukeView® Forms Software Version 2.1
  • Externally accessible fuses for easy replacement

These 787 features are also included in the 789:

  • DMM designed to meet 1000 volt IEC 1010 CAT III standards
  • Precision 1000 V, 440 mA True-RMS digital multimeter
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode test and continuity beeper
  • Simultaneous mA and% of scale readout
  • 20 mA DC current source/loop calibrator/ simulator
  • Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
  • Externally accessible battery for easy battery changes


  • 320 x 240 resolution
  • 2 meter drop test
  • IR Fusion™ technology for context
  • Fixed focus
  • Measure up to 400 °C


  • Precise laser technology for more accurate and repeatable measurements
    • Temperature accuracy of up to ± 1℃ or ± 1% of reading whichever is greater with 20:1 distance to spot ratio
  • Flashlight and large, easy-to-read backlit LCD display for easy viewing even in dark environment
  • IP54 rated for extra protection against airborne contaminants
  • Get your tool to work when you can't - set time and desired interval between measurements and Auto Capture will capture spot temperatures unattended
  • 99 data point logging
  • 30 hour battery life so your tool can perform as long as you need it to
  • Displays the minimum, maximum or average temperature, or the difference between two measurements
  • Hi and Lo alarms for rapid display of measurements outside set limits
  • Small and lightweight design fits easily into your tool box
  • Powered by one (1) AA alkaline battery


The Fluke 1736 and 1738 Three-phase Power Quality Loggers are versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.
  • Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
  • Convenient instrument powering: Power instrument directly from the measured circuit
  • Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health


Precision when you need it for infrared temperature calibration
  • Certify IR pyrometers from –30 °C to 500 °C (–22 °F to 932 °F)
  • Large 57 mm (2.25 in) blackbody target
  • RTD reference well for contact temperature measurement
  • Small, compact design