Product Finder

Displaying 1 - 13 of 13
Product Results:
Abaco - FMC116 high pin count FMC ADC, 16-channel 14-bit ADC - 125 Msps

Abaco - FMC116 high pin count FMC ADC, 16-channel 14-bit ADC - 125 Msps

16 channel 14-bit 125 Msps A/D conversion Conduction cooled compatible ANSI/VITA 57.1-2010 compliant Based on LTC2175-14...
Abaco - FMC120 Four Channel 16-Bit A/D up to 1.0 Gsps. Four Channel 16-Bit D/A up to 1.25 Gsps

Abaco - FMC120 Four Channel 16-Bit A/D up to 1.0 Gsps. Four Channel 16-Bit D/A up to 1.25 Gsps

4-Channels 16-bit 1.00 Gsps A/D 1.5 GHz Analog Bandwidth Usable in the 3rd Nyquist Zone 4-Channels 16...
Abaco - FMC126 high pin count FMC ADC, 4-channel 10-bit ADC - 5 Gsps

Abaco - FMC126 high pin count FMC ADC, 4-channel 10-bit ADC - 5 Gsps

Quad - Dual - Single 10-Bit Channel Operation 4-Channel 1.25 Gsps A/D conversion Mode 2-Channel 2.50 Gsps A/D conversion Mode...
Abaco - FMC134 FPGA Mezzanine Card, Direct RF conversion module

Abaco - FMC134 FPGA Mezzanine Card, Direct RF conversion module

Two operational modes 4 channels, 12-bit, 3.2GSPS data rate 2 channels, 12-bit, 6.4GSPS data rate...
Abaco - FMC150 Dual 14-bit A/D & Dual 16-bit D/A

Abaco - FMC150 Dual 14-bit A/D & Dual 16-bit D/A

Quad Channel Operation 2-channels 14-bit A/D up to 250 Msps 2-channels 16-bit D/A up to 800 Msps VITA...
Abaco - FMC160 FMC VITA 57.1 Compliant, Single channel 12-bit 3.6Gsps A/D and 14-bit 5.7Gsps D/A

Abaco - FMC160 FMC VITA 57.1 Compliant, Single channel 12-bit 3.6Gsps A/D and 14-bit 5.7Gsps D/A

One ADC12D1800: Single channel 12-bit 3.6Gsps One AD9129: Single channel 14-bit D/A up to 5.7 Gsps (2.85Gsps without 1:2 interpolation) - LVDS...
Abaco - FMC165 FPGA Mezzanine Card, Dual Channel ADC and Single Channel DAC

Abaco - FMC165 FPGA Mezzanine Card, Dual Channel ADC and Single Channel DAC

ADC32RF44 ADC: dual-channel 14-bit up to 2.6 GSPS with DDC (or 14-bit @ 2.5 GSPS with full data rate) AD9129 DAC: single-channel 14-bit up to 5.2 GSPS (2.6 GSPS...
Abaco - FMC168 low pin count FMC, 8-channel 16-bit ADC - 250 Msps

Abaco - FMC168 low pin count FMC, 8-channel 16-bit ADC - 250 Msps

Eight channel 16-bit 250MSPS A/D conversion Available as air cooled and conduction cooled VITA 57.1-2010 compliant Based on TI...
Abaco - FMC172 FPGA Mezzanine Card, Wideband Low Latency FMC Module

Abaco - FMC172 FPGA Mezzanine Card, Wideband Low Latency FMC Module

Single-channel, 10-bit A/D up to 6.4GSPS Single-channel, 10-bit D/A up to 6.0GSPS VITA 57.1 FMC compliant Conduction-cooled...
Abaco - FMC176 FMC VITA 57.1 Compliant, Quad 250Msps A/D - Dual 5.6Gsps D/A @ 14-bit

Abaco - FMC176 FMC VITA 57.1 Compliant, Quad 250Msps A/D - Dual 5.6Gsps D/A @ 14-bit

Two AD9250: 4-channel 14-bit A/D up to 250 Msps - JESD204B Two AD9129: 2-channel 14-bit D/A up to 5.6 Gsps (2.8Gsps without 2:1 interpolation) - LVDS...
Abaco - FMC216 high pin count FMC DAC, 16-channel 16-bit DAC – 312.5 Msps

Abaco - FMC216 high pin count FMC DAC, 16-channel 16-bit DAC – 312.5 Msps

16 channel 16-bit 312.5Msps D/A conversion Conduction cooled compatible ANSI/VITA 57.1-2010 compliant Based on DAC39J84...
Abaco - FMC407 FPGA Mezzanine Card, Clock and Trigger Distribution FMC

Abaco - FMC407 FPGA Mezzanine Card, Clock and Trigger Distribution FMC

External clock input and onboard VCO External reference input and onboard reference (30.72MHz) Eight synchronized clock outputs...
Abaco - FMC424 FPGA Mezzanine Card, Stackable QSFP+ Module

Abaco - FMC424 FPGA Mezzanine Card, Stackable QSFP+ Module

Dual QSFP+ 10.3125 Gbps per transceiver, 82.5 Gbps total data rate GBT FMC connector signaling ANSI/VITA 57.1-2010 electrically...

  • Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
  • TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
  • Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
  • Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
  • Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
  • LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
  • Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
  • Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
  • Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
  • Save multiple logging sessions before PC download is necessary.
  • Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
  • On board help screens for measurement functions. Unsure about a function - go to that function and press the "i" button.
  • Real time clock for automatic time stamping of saved readings.
  • Relative mode to remove test lead resistance from low ohms or capacitance measurements.
  • True-RMS AC voltage and current for accurate measurements on non-linear signals.
  • Measure up to 10 A (20 A for 30 seconds).
  • 100 mF capacitance range.
  • Peak capture to record transients as fast as 250 μs.
  • Premium test leads and alligator clips included.
  • Amp jack plugs included.
  • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
  • FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
  • Limited lifetime warranty.


Installs and grounds in less than 5 minutes Save time with quick and easy installation with the CV Series – 5 minutes or less.
  • One technician
  • One hole with standard Greenlee® punch
  • Panel door does not need to be removed
  • Grounds instantly to metal enclosure with patent-pending AutoGround™ process
  • Maintains panel arc test ratings up to 63kA when properly installed
Work more efficiently with Fluke ClirVu® CV401 95 mm (4 in) Infrared Windows
  • NFPA 70E processes significantly reduced due to less work permit requirements
  • Faster and more comfortable inspections because full PPE is often not required
  • Reduce the risk of arc-flash and electrocution, increase the safety of your personnel and reduce the time and cost of preventive maintenance
  • CV401 is Torture Tested™ to the highest arc blast test ratings IEEE C37.20.7: 63 kA Arc tested at KEMA, UL 50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE
  • Convenience of both quick turn or security keyed access


  • Two electrically isolated inputs
  • CAT III 1000 V / CAT IV 600 V safety rated
  • 60 MHz bandwidth model
  • 625 MS/s
  • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
  • Dedicated 5000 Count digital multimeter
  • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
  • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
  • TrendPlot, trend measurement readings for up to 22 days
  • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP-51 rated for dust and drip proof to withstand harsh environments
  • Isolated USB ports for memory devices and PC connectivity
  • Li-Ion battery for extended operating timespan: up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
  • Charge spare battery using optional external battery charger (EBC290)
  • Easy-access battery door to make it easy to swap batteries
  • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock


Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.
  • Advanced power quality health—At-a-glance power quality health data in real time so you can make better maintenance decisions
  • Energy loss calculator—Discover the costs of energy loss specifically caused by poor power quality
  • Highest safety rating in industry—CAT III 1000 V / CAT IV 600 V


  • Reduced risk—Permanently installed voltage and current connections can be accessed without opening the panel door
  • Increased efficiency—Quickly connect your logger or analyzer and begin taking measurements faster than ever
  • Easy installation—A standard step drill bit and electro-hydraulic hole punch provide the simple means to quickly mount the window in the panel