Product Finder

Displaying 1 - 6 of 6
Product Results:
Abaco - NIC10G Dual 10GbE XMC Card with Front or Rear I/O

Abaco - NIC10G Dual 10GbE XMC Card with Front or Rear I/O

Two 10GbE ports Front or Rear I/O XMC Form Factor Intel 82599ES Dual 10GbE Controller Air and conduction...
Abaco - NIC10GBT Network Interface Card, Dual/Four Channel 10/100/1000 Mbit/s Ethernet

Abaco - NIC10GBT Network Interface Card, Dual/Four Channel 10/100/1000 Mbit/s Ethernet

Software support for Intel™ I210IT at www.intel.com For operating systems not supported by Intel™, please contact Abaco Systems  
Abaco - NIC10GFT Network Interface Card, Dual 10GBASE-T XMC with Front I/O

Abaco - NIC10GFT Network Interface Card, Dual 10GBASE-T XMC with Front I/O

Two 10GBASE-T ports Front I/O XMC form factor Intel X540 dual 10GbE controller x8 PCI Express (Base...
Abaco - PMC-GBIT-DT2BP Network Interface Card, PMC with Dual 1000BaseT/100BaseTX/10BaseT Rear Panel Gigabit Ethernet Interfaces

Abaco - PMC-GBIT-DT2BP Network Interface Card, PMC with Dual 1000BaseT/100BaseTX/10BaseT Rear Panel Gigabit Ethernet Interfaces

Dual 10BaseT / 100BaseTX / 1000BaseT network interface card with rear panel access Single-wide 32/64-bit 33/66 MHz PCI, 66/133MHz PCI-X PMC Auto-...
Abaco - PNIC1G PCI Mezzanine Card (PMC) Dual/Four Channel 10/100/1000 Mbit/s Ethernet

Abaco - PNIC1G PCI Mezzanine Card (PMC) Dual/Four Channel 10/100/1000 Mbit/s Ethernet

Software support for Intel™ I210IT at www.intel.com For operating systems not supported by Intel™, please contact Abaco Systems  
Abaco - XMC477RC Four Channel SFP Gigabit Ethernet Interface

Abaco - XMC477RC Four Channel SFP Gigabit Ethernet Interface

Four channel Gigabit Ethernet Interface SFP Front Panel I/O Four SFP cages IPMI resource FRU hardware definition information stored in onboard...

  • Continuous touchscreen IR-Fusion™
  • 5 hours battery life
  • Can withstand drop up to 2 meter
  • Water and dust resistant—IP54 enclosure rating
  • Automatically organize and file thermal images with Fluke Connect™ Asset Tagging
  • 120 x 90 infrared resolution


  • 320 x 240 resolution
  • 2 meter drop test
  • LaserSharp™ Auto Focus
  • Manual or automatic focus
  • Measure up to 650 °C


Fluke 789 Temperature Kit features:

  • Unique new wireless measurement logging capability
  • Temperature measurement from -200 °C to 1372 °C using the t3000 FC
  • 24 V Loop power supply
  • HART mode setting with loop power (adds 250 ohm resistor)
  • 100% larger dual display
  • 1200 ohm drive capability on mA source
  • Enhanced backlight with two brightness settings
  • 0% to 100% mA Span Check buttons to toggle between 4 and 20 mA
  • Infrared I/O serial port compatible with
  • FlukeView® Forms Software Version 2.1
  • Externally accessible fuses for easy replacement

These 787 features are also included in the 789:

  • DMM designed to meet 1000 volt IEC 1010 CAT III standards
  • Precision 1000 V, 440 mA True-RMS digital multimeter
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode test and continuity beeper
  • Simultaneous mA and% of scale readout
  • 20 mA DC current source/loop calibrator/ simulator
  • Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
  • Externally accessible battery for easy battery changes


  • A completely sealed, IP67 rated case
  • Withstands drops up to 10 ft or 3 m (with holster)
  • Dustproof per IEC 60529 IP6x
  • Waterproof per IEC 60529 IPx7
  • CAT III 1000 V, CAT IV 600 V
  • Reversible holster for added protection of the display when not in use


  • Now compatible with Fluke Connect mobile app and all Fluke FC enabled test tools with optional ir3000 FC infrared connector (sold separately).
  • Let your team see what you see in an instant with ShareLive™ video call (requires Fluke Connect mobile app and ir3000 FC wireless connector).
  • TrendCapture quickly graphically displays logged data session to quickly determine whether anomalies may have occurred.
  • Limited lifetime warranty.