Product Finder

Displaying 1 - 8 of 8
Product Results:
Abaco - AXIS Pro Advanced Multiprocessor Application Development Environment

Abaco - AXIS Pro Advanced Multiprocessor Application Development Environment

AXIS View GUI - multiprocessor management tools Multi-board system visualization Rapid application development Runtime performance analysis...
Abaco - DSP221 NXP QorIQ T2081 based Rugged 6U VXS Single Board Computer

Abaco - DSP221 NXP QorIQ T2081 based Rugged 6U VXS Single Board Computer

6U VXS single board computer Power Architecture™ AMP (advanced multiprocessing) CPU T2081 (eight e6500 virtual cores) 8GB...
Abaco - IMP3B 3U CPCI QorIQ-based Single Board Computer

Abaco - IMP3B 3U CPCI QorIQ-based Single Board Computer

QorIQ processor up to 1.0 GHz - Two e500v2 cores Shared 512 KB L2 Cache with ECC Integrated DDR3 memory controller with ECC...
Abaco - PMC522 Four Port Serial Controller I/O for VME and CompactPCI

Abaco - PMC522 Four Port Serial Controller I/O for VME and CompactPCI

PMC form factor Four port RS-232 serial controller PCI bus 2.3 target interface compliant up to 33 MHz clock, 32-bit bus Four...
Abaco - PMC522/FP Eight Port Serial Controller I/O for VME and CompactPCI

Abaco - PMC522/FP Eight Port Serial Controller I/O for VME and CompactPCI

PMC form factor Eight port RS-232/RS-422 serial controller PCI bus 2.3 target interface compliant up to 33 MHz clock, 32-bit bus...
Abaco - PPC11A QorIQ T2081/T1042-based Rugged 6U VME Single Board Computer

Abaco - PPC11A QorIQ T2081/T1042-based Rugged 6U VME Single Board Computer

6U VME single board computer Power Architecture™ AMP (advanced multiprocessing) CPUs T1042 (four e5500 cores) T2081 (...
Abaco - SBC314 3U VPX QorIQ AMP T1042 / T2081-based Single Board Computer

Abaco - SBC314 3U VPX QorIQ AMP T1042 / T2081-based Single Board Computer

3U OpenVPX single board computer Power Architecture™ AMP (advanced multiprocessing) CPUs T1042 (four e5500 cores...
Abaco - SBC314C Flight-Certifiable Single Board Computer - Power Architecture T2081 SBC for flight-certifiable applications to DO-254 DAL-A

Abaco - SBC314C Flight-Certifiable Single Board Computer - Power Architecture T2081 SBC for flight-certifiable applications to DO-254 DAL-A


  • Highly accurate infrared thermometer for measuring temperatures from -30°C to 500°C (-22°F to 932°F) accurate to +1.5°C or +1.5% of reading (whichever is greater)
  • Provides a 10:1 Distance to spot ratio
  • Offers single laser targeting for accurate and repeatable measurements
  • Features IP54 rating against dust and moisture


  • Full featured multimeter that also reads results wirelessly from remote Fluke Connect® wireless modules
  • Measures AC and DC voltage to 1000 V, AC and DC current, and temperature
  • Shows up to four readings simultaneously on a bright white backlit display
  • Sends measurement data to your smartphone
  • Safety rated CAT III 1000 V, Cat IV 600 V; IP54


  • 0.1% DC accuracy
  • Current measurements up to 10 A, 20 A for up to 30 seconds
  • Millisecond pulse width measurements for fuel injectors
  • Optional magnetic hanger allows meter to attach to the vehicle and free your hands for other tasks
  • Min/Max/Average recording with Min/Max Alert to capture variations automatically
  • Peak Min/Max to record transients as fast as 250 μs
  • Relative mode to remove test lead resistance from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Autohold™ to capture stable readings with only one touch of the leads
  • Large display digits and two-level bright white backlight for increased visibility
  • Analog bargraph to track changing or unstable signals
  • Input Alert provides audible warning against wrong use of input jacks
  • Access door for fast battery changes without opening up the case
  • "Classic" design that fits your hand with new removable holster, built-in test lead and probe storage
  • 10 meg ohm input impedance won’t damage computer circuits
  • Limited lifetime warranty


  • Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
  • Large digit display with bright, two-level backlight makes the 83V significantly easier to read than older models
  • 6000 counts, 3-3/4 digits
  • Measure up to 1000 V AC and DC
  • Measure up to 10 A, 20 A for up to 30 seconds
  • Frequency to 200 kHz and % duty cycle
  • Resistance, continuity and diode test
  • 10,000 µF capacitance range for components and motor caps
  • Min/Max-Average recording with Min/Max Alert to capture variations automatically
  • Relative mode to remove test lead interference from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Touch Hold to capture stable readings avoiding noisy signals
  • Large display digits and two-level bright white backlight for increased visibility
  • Analog bargraph for fast changing or unstable signals
  • Input Alert provides audible warning against wrong use of input jacks
  • Improved selectable sleep mode for long battery life
  • Access door for fast battery changes without breaking the calibration seal
  • "Classic" design with new removable holster with built in test lead and probe storage
  • Lifetime warranty
Electrical safety
All inputs are updated to the 3rd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V and CAT III, 1000 V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.
  • Measure AC current with an optional current clamp accessory


  • Two electrically isolated inputs
  • CAT III 1000 V / CAT IV 600 V safety rated
  • 100 MHz bandwidth model
  • 1.25 GS/s
  • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
  • Dedicated 5000 Count digital multimeter in 2-channel models
  • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
  • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
  • TrendPlot, trend measurement readings for up to 22 days
  • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP-51 rated for dust and drip proof to withstand harsh environments
  • Isolated USB ports for memory devices and PC connectivity
  • Li-Ion battery for extended operating timespan: up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
  • Charge spare battery using optional external battery charger (EBC290)
  • Easy-access battery door to make it easy to swap batteries
  • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock