-
The SL147 is characterized as a 2×2 Spot Light with the necessary optics to project light over longer distances.
-
Ideal Illumination for medium working distances.
-
The spot light is available in a very wide range of wavelengths from UV to IR.
-
Diffuser and polarizer options are also available as well as several lens choices.
-
A washdown version is also available as an option.
-
The SL147 provides 88kLux at a working distance of 4” (100mm).
-
Convenient mounting with an M4 nut channel.
Advanced Illumination - Band Pass Filters
-
Eliminating all but a narrow band of light (+/- 40nm) centered on the specified wavelength, band pass filters are used to enhance colors, or to stop unwanted ambient light from reaching the camera.
-
Filtering can replace existing shrouds, simplifying the physical set up of an inspection site.
-
Ai offers 660nm and 635nm band pass filters to fit a number of different lens sizes.
General Specs
Data Points - Typical
Optical Specs
More Product Information
-
Part of the MicroBrite™ family of high performance, compact machine vision lights.
-
Our DF196 Series delivers direct illumination at a low angle to cast shadows used to identify surface defects, embossed text, etc.
-
This dark field ring light is more directional and less diffuse than the DF198.
-
Available in 4 sizes with an intesity of 72kLux (working distance of 25mm with DF196-100)
-
High Intensity: up to 9x brighter than the existing SL191 Pattern Projecting Spot Light and more than 3x brighter than the leading competitive structured light projector.
-
Projection patterns are easily configured with available reticles, including line, grid, cross, multiple lines, and half sphere, with custom reticles available.
-
Customizable: available in multiple wavelengths, including white.
-
Constructed with a large heat sink for improved LED thermal management to facilitate increased brightness while maintaining safe operating temperatures.
-
Ideal solution for machine vision inspection applications requiring structured illumination, including edge detection, locating offsets, and assessing topography.
-
Defect pixel correction (on/off)
-
Region of interest (ROI)
-
Gain (manual control, 0 to 17 dB)
-
Exposure (manual control, 32 µs to 1.4 s)
-
Gamma correction
-
Reverse X
-
DeviceLinkThroughputLimit (easy bandwidth control)
-
Sync out modes: Waiting for a trigger, exposing, readout, imaging
-
Storable user sets
-
Wide Input Bandwidth
-
Input Isolation
-
Automatic & Manual Changeover
-
Transformer Coupled Outputs
-
Twenty four Outputs
-
Front Panel Status Indicators
-
Fault Discrete Inputs
-
Compact 1U, 19” rack mount
-
The I3 and I3S Inline Controllers provide overdrive strobe and continuous operation to lights from a small package when larger, more versatile external controllers are not necessary.
-
Switching between continuous-on, gating on/off and strobe overdrive is seamless. The I3 and I3S employ Ai’s exclusive Adaptive OverdriveTM that optimizes strobe power regardless of input Pulse Width.
-
The I3 is a default-on device on power-up, whereas the I3S is a default-off device, requiring a trigger to illuminate.
-
All ICS models employ reverse input polarity protection.
-
Provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming. 30 uSec response time.
-
A wash down version of all ICS drivers is provided automatically with any wash down light to which it is attached.
-
0 – 100% Intensity Control with optional DCS-MP, purchased separately, will provide manual intensity control via an external potentiometer.
-
High performance power bypassing provides low-impedance and resonant-free connections to 20 GHz
-
RF bandwidth to 500 MHz
-
Long probe life: > 250,000 contacts
-
Beryllium-copper tips for gold pads or tungsten for aluminum pads
-
Oscillation-free testing of wide-bandwidth analog circuits
-
Use with ACP series probes to provide functional at-speed testing for known-good-die
-
Mix multiple contact types: Ground, Power (Standard or Eye-Pass), Logic/Signal
-
Low and repeatable contact resistance on aluminum pads ( < 0.25 Ω on Al, < 0.01 Ω on Au)
-
Write your own code in ANSI C, as part of the FRIWO firmware.
-
Focus on developing your own applications and USPs:
-
Develop your own hill assist (application: eScooter)
-
Turn your motor control into a fan or pump control
-
Adapt CAN messages to your existing eScooter setup
-
Adapt CAN messages of your FRIWO Battery Pack
-
Use your own algorithms for field oriented control (coming soon)
-
Develop your own State of Charge (SOC) calculation within the BMS (coming soon)
-
-
Access to new modules to provide even more integration depth and possibilities for customization.
-
Monitor and change your own parameters within the FRIWO Enable Tool.
-
Advanced component protection against misconfiguration.
-
Easy rollout of your customized software for your eScooter fleet (Requirement: The eScooters run with MCU6000).
-
Access to Github Repository with detailed code samples.
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636