Advanced Illumination - Band Pass Filters
- Eliminating all but a narrow band of light (+/- 40nm) centered on the specified wavelength, band pass filters are used to enhance colors, or to stop unwanted ambient light from reaching the camera.
- Filtering can replace existing shrouds, simplifying the physical set up of an inspection site.
- Ai offers 660nm and 635nm band pass filters to fit a number of different lens sizes.
More Product Information

- The Wide Linear Diffuse Light series is ideal for the inspection of elongated or cylindrical objects.
- Perfect for inspections requiring a multi-camera setup.
- Can be provided with up to 4 viewing ports.
- Expandable lengths from 6” – 36” (152 – 194mm) in 6” increments.
- Detented, 30 position potentiometer for repeatable dimming with cable inline controllers
- Built in DIN-rail or panel mounting feature
- Flip up cover for potentiometer to prevent accidental adjustments
- Spring clamp wiring terminal for vibration proof installation
- NEW M12 selector switch for use with iCS 2 (IC) and iCS 3 (I3) M12-based lights

The VectorStar ME7838 Series broadband VNA offers the widest available single frequency sweep from 70 kHz to 110, (ME7838AX to 125), (ME7838EX to 125), to 145 GHz, and to 220 GHz with mmWave bands to 1.1 THz.
- The ME7838AX or ME7838EX version can easily be upgraded to 145 GHz and to 220 GHz
- All versions may be configured to include banded millimeter-wave modules up to 1.1 THz
- Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs.
- All versions support the 3744x-Rx receiver for noise figure measurements, including the ability to characterize differential noise figure, to 125 GHz
- Compact, lightweight mmWave modules (0.6 lb vs 7+ lbs and 1/50 the volume) offer low cost installation on smaller probe stations.

Modules are usually smaller and are usually part of systems. You supply your own DC voltage, make the connections and supply your own DC supply. Modules are available with or without heatsinks and fans. Amplifiers Modules are available in both Broadband and Band-Specific frequencies. Modular design concepts save time and money, and are lightweight, reliable, cost-effective solutions. We are well-known in the industry for successfully adapting our amplifiers or custom designing new solutions to suit each unique project. Please refer to our Adapted & Custom Design Solutions link to begin formulating your performance objectives and other criteria.

- Securely connects the SL112 or SL162 to Moritex, Dolan-Jenner, and Fostec fiber optic light guides
- Set screws are included

-
Easy to Use
-
No need to break the circuit or insert a shunt
-
Small form factors for use on crowded boards
-
-
Variety of Applications
-
Bandwidths up to 100 MHz
-
Peak currents up to 700 A
-
Sensitivities down to 1mA/div
-
-
High Precision Measurements
-
Low frequency accuracy of 1%
-
Integrated autozero capability
-
-
Fully Integrated with Teledyne LeCroy Oscilloscope
-
No additonal hardware is required
-
Power is supplied from oscilloscope ProBus connection
-
Automatic display of waveforms in Amps and calculated power traces scaled correctly in Watts
-
Degauss and Autozero directly from oscilloscope user interface
-
-
DCS025 Deskew Calibration Source
-
Provides ability to precisely deskew most voltage probes along with 30, 150 and 500A current probes
-

- High performance power bypassing provides low-impedance and resonant-free connections to 20 GHz
- RF bandwidth to 500 MHz
- Long probe life: > 250,000 contacts
- Beryllium-copper tips for gold pads or tungsten for aluminum pads
- Oscillation-free testing of wide-bandwidth analog circuits
- Use with ACP series probes to provide functional at-speed testing for known-good-die
- Mix multiple contact types: Ground, Power (Standard or Eye-Pass), Logic/Signal
- Low and repeatable contact resistance on aluminum pads ( < 0.25 Ω on Al, < 0.01 Ω on Au)
-
Auto gain (manual gain control: 0 to 26 dB; 1 dB increments)
-
Auto exposure (18 µs to 126 s; 1 µs increments)
-
Black level (offset)
-
Decimation
-
Gamma correction
-
Three look-up tables (LUTs)
-
Pixel defect masking
-
Piecewise Linear HDR mode
-
Region of interest (ROI), separate ROI for auto features
-
Reverse X/Y
-
Auto-iris (video type)
-
Event channel
-
Image chunk data
-
IEEE 1588 Precision Time Protocol (PTP)
-
Storable user sets
-
StreamBytesPerSecond (bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Temperature monitoring (main board)
-
Trigger over Ethernet (ToE) Action Commands

The ES9910 Ethernet switch/router, an advanced solution that offers seamlessly integrated, highly flexible, and fully managed LAN/VLAN connectivity for mission-critical systems.
This versatile technology serves onboard operations for both manned and unmanned ground, air, and sea vehicles, empowering them with top-notch networking capabilities.
The ENERTEC™ mission data processing and distribution units offer cost-effective, dependable solutions for acquiring, processing, storing, utilizing, and distributing field and mission data.
These units undergo rigorous validation and formal qualification testing, adhering to standard test methods such as DO-160 and MIL-STD-810 to ensure their reliability and performance.

Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636
Imaging/Machine Vision
