autoVimation - Lizard Compact IP66/IP67 Camera Enclosure
- For cameras up to 40 x 40mm cross section
- Front tube for easy lens access
- Robust construction
- Compact size
- High IP protection class
- Flexible camera positioning
- High chemical resistance
- Vibration‐proof mounting
- Camera mount included
- Excellent heat dissipation
- Compact size
- Robust construction
- Vibration-proof mounting
- 90° image rotation
- Work.dist. adjustment
- IP66 rating
- IP67 rating
- Excellent heat dissipation
- Cam mount provides excellent heat dissipation
- Tube for easy lens access
- For cameras up to 40x40mm cross section
- For lenses up to 55mm diameter
- Special mounts for cylindric lasers or cameras
- Compact dimensions and robust design
- BK7/acrylic windows for cameras up to 2500nm
- Sapphire windows for SWIR cameras up to 7µm
- Germanium windows for LWIR cameras 7-14µm
- Heater or water cooling option
- Custom color possible
- Large number of accessories available
- Easy window exchange
Document
|
Enclosure Type |
Rear Wall A + B + C + D |
Drawing |
Step1 |
eDrawings2 |
|---|---|---|---|---|
|
Lizard |
|
- The step/eDrawings files contain only rear wall A
- Software for 3D imaging with measuring option: Free Download eDrawings-Viewer
More Product Information
- For cameras up to 61 x 61mm cross section
- Robust construction, high IP protection class
- Flexible camera positioning
- High chemical resistance
- Vibration‐proof mounting
- Excellent heat dissipation
- Integration of ring lights possible
- Dome window option
- Twin window Ge/BK7 for Flir A50/70 option
- Extremely bright, compact and reliable
- Chip-on-board LED technology
- Seamless integration and mounting
SpecBright Spot Lights utilize Chip-on-Board LED arrays to provide extremely bright, uniform light from a compact form factor. These lights are designed for easy installation and the many options available make them an ideal solution for many applications.
The VectorStar ME7838 Series broadband VNA offers the widest available single frequency sweep from 70 kHz to 110, (ME7838AX to 125), (ME7838EX to 125), to 145 GHz, and to 220 GHz with mmWave bands to 1.1 THz.
- The ME7838AX or ME7838EX version can easily be upgraded to 145 GHz and to 220 GHz
- All versions may be configured to include banded millimeter-wave modules up to 1.1 THz
- Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs.
- All versions support the 3744x-Rx receiver for noise figure measurements, including the ability to characterize differential noise figure, to 125 GHz
- Compact, lightweight mmWave modules (0.6 lb vs 7+ lbs and 1/50 the volume) offer low cost installation on smaller probe stations.
-
AR0135CS CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1500 C-120m) and color (1500 C-120c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
Very useful where space is restricted, the EMC chamber EMC-MC will settle into almost any office space. Its small overall size results from the use of our modular SmartShield chamber lined with our AEPH HyPyr-LossTM absorber technology requiring less volumetric space than in a traditional chamber. This mini compact EMC chamber is applicable in EMC pre compliance and general Research & Development RF testing.
-
Compact 0.5 MP camera
-
Robust metal housing
-
Sony ICX415 sensor
-
Optocoupled I/Os
-
Various IR cut/pass filters
-
White medical housing
- For zylindrical laser with 19 and 20mm diameter
- Robust construction
- Compact size
- Small dead weight
- High IP protection class
- High chemical resistance
- Vibration-proof mounting
- Laser mount included
- Good heat dissipation
-
Ultra-compact design
-
Affordable
-
Power over Ethernet
-
High frame rate
-
Monochrome (G-032B) and color (G-032C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filterr
- For cameras up to 61 x 61mm cross section
- Perfect for underwater use
- IP68 protection class
- Double seal system
- Robust construction
- Flexible camera positioning
- High chemical resistance
- Vibration‐proof mounting
- Camera mount included
- Excellent heat dissipation
- Integration of ring lights possible
- Tested 12h in 10m water depth
autoVimation
Website
autoVimation produces protective camera enclosures and an extensive range of accessories that allows to use machine vision systems in virtually any environment. The enclosures are as variable as the applications: from the extremely compact Colibri to large housings for line scan cameras – from easy to integrate dovetail enclosures to to high grade stainless steel Dolphin and Shark in hygienic design – there is a solution for every application. Thanks to autoVimation's patented heat-guide / quick-lock camera mount the outer enclosure works like a heat-sink to the camera.
