AVT - Alvium 1800 C -1240 Embedded vision CSI-2 camera with IMX226 sensor
-
IMX226 CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1800 C-1240m) and color (1800 C-1240c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
Alvium CSI-2 cameras enable new designs for embedded applications with improved image quality and reduced workload for the host. The innovative ALVIUM System on Chip (SoC) performs image corrections and preprocessing tasks onboard the camera instead of the embedded board. Unlike FPGAs commonly used in machine vision cameras, the ALVIUM SoC is extremely power efficient. With Alvium, integrating hardware and software can be done effortlessly, which ultimately reduces development time. The Sony IMX226 CMOS sensor enables imaging at 12.2 megapixel and 41 frames per second. Color models ship with an IR cut filter, monochrome and S-Mount models ship without a filter or protection glass.
View product page to configure camera options.
Hardware options
- Housing: Bare board or open housing
- Various lens mounts: C-Mount, CS-Mount, or S-Mount
For more information on hardware options, including product codes and technical data, such as technical drawings and mass, see the Alvium Cameras Hardware Options document.
Available accessories
- Tripod adapter
- Adapter boards connect to various embedded boards.
- FPC cables in 120 mm, 220 mm, and 420 mm length
- Various lenses and Allied Vision S-Mount lenses with focal lengths 2.97 - 12 mm
Document
More Product Information
-
AR0521 CMOS sensor
-
ALVIUM image processing
-
USB3 Vision
-
Various hardware options
-
Monochrome (1800 U-500m) and color (1800 U-500c) models
-
ALVIUM® Technology for on-board image processing
-
USB3 Vision interface for GenICam SFNC features
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Micro-B USB 3.1 Gen 1 connector with screw locks for industrial applications
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for both embedded and machine vision applications
-
High spatial resolution
-
IEEE 1588 PTP
-
Power over Ethernet
-
Defect pixel masking
-
Monochrome (GT5400) and color (GT5400C) models
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Planarity adjusted (PA) EF Lens Mount (option -18) for electronic control of aperture and autofocus
-
Easy camera mounting via standard M3 threads at all sides and 1/4-20 tripod mounting hole
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
Image optimization features:
-
Auto gain (manual gain control: 0 to 32 dB)
-
Auto exposure (manual exposure control: 10 µs to 26.8 s)
-
Auto white balance (GT3300C only)
-
Binning (horizontal and vertical)
-
Color correction, hue, saturation (GT3300C only)
-
Column defect masking
-
Decimation X/Y
-
Gamma correction
-
Three look-up tables (LUTs)
-
Region of interest (ROI), separate ROI for auto features
-
Reverse X/Y
Camera control features:
-
P-Iris and DC-Iris lens control
-
Event channel
-
Image chunk data
-
IEEE 1588 Precision Time Protocol (PTP)
-
RS232
-
Storable user sets
-
StreamBytesPerSecond (bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Tap mode switchable in Vimba Viewer 2.0 or later (four-tap, one-tap)
-
Temperature monitoring (main board and sensor board)
-
Trigger over Ethernet (ToE) Action Commands
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system cost
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba SDK and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
-
High performance Camera Link InGaAs SWIR camera
-
QVGA resolution
-
Efficient cooling with fan, no condensation
-
Simple camera configuration via GenCP
-
Nitrogen-filled cooling chamber to avoid condensation
-
Up to 344 fps at full resolution
-
Camera Link interface with GenCP support
-
Comprehensive I/O control options
-
Automated on-board image correction
-
TEC1 sensor cooling
-
Extended operating temperature range
- SWIR (800-1800 nm) optimized
- 43.2 mm max. sensor size
- Focal length: 40 mm
- Initial aperture: F2.8
- Compatible to the V38-Mount System
-
IMX304 CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1800 C-1236m) and color (1800 C-1236c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
Alvium 1800 U is a small and powerful industrial camera. Benefit from high image quality at a great price-performance ratio!
- Various sensors: Select between CMOS sensors from ON Semi and Sony, including NIR (near infrared), for your individual applications.
- Image reproduction quality: Get the best out of your lens-to-sensor combination by high-precision Alvium Sensor Alignment.
- Intelligent power management: Design low-power or even battery-powered systems.
- USB 3.1 Gen 1: Install our VIMBA Suite and get your first images easily.
- Industrial-grade hardware: Design reliable applications by the Micro-B USB 3.1 Gen 1 connector with screw locks.
-
Fast Camera Link InGaAs SWIR camera
-
VGA resolution
-
Compact industrial design, no fan
-
Simple camera configuration via GenCP
-
Compact industrial design
-
Up to 301 fps at full resolution
-
Camera Link interface with GenCP support
-
Comprehensive I/O control options
-
Automated on-board image correction
-
Stabilized sensor cooling, no fan
-
Extended operating temperature range
Allied Vision Technologies
For more than 30 years, Allied Vision has been helping people to reach their imaging goals. Allied Vision supplies camera technology and image capture solutions for industrial inspection, medical and scientific imaging, traffic monitoring and many more application areas in digital imaging.
With a deep understanding of customers’ needs, Allied Vision finds individual solutions for every application, a practice which has made Allied Vision one of the leading camera manufacturers worldwide in the machine vision market.
The company has nine locations in Germany, Canada, the United States, Singapore and China and is represented by a network of sales partners in over 30 countries.
Contact Details
Allied Vision
102 Pickering Way - Suite 502 Exton, PA 19341, USA
Phone: +1-877-USA-1394
Fax: +1 978-225-2030
Imaging/Machine Vision
Download Line Card
