Resistance decade box designed for RTD and other resistance-based sensors' simulation. 0.01°C accuracy and 0.001°C resolution. 

• Real resistors switched by relays
• Custom temperature scales
• No residual resistance
• 0.01°C accuracy
• Six different languages

Configurable and SWaP-C optimized with maximum storage capacity, processing power, and intelligence, our ruggedized, TAA-compliant BAM servers are the perfect solutions to accelerate and sustain ever-evolving applications

• Leading Performance CPUs - Supports dual Intel® 3rd, 4th & 5th Gen Xeon® SP CPUs with hardware-based encryption for enhanced compute and networking.
• High-end GPUs and FPGAs - Supports multiple double-wide, high-end Intel® and NVIDIA® GPUs and FPGAs to accelerate AI/ML/DL workloads at the edge.
• Fast NVMe SSDs - Supports up to 8 high-speed NVMe or 9 SAS/SATA SSDs to increase read/write speeds (FIPS 140-2/3 available).

Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 1kOhm), the input impedance of these probes remains nearly constant over their entire frequency range. A traditional /10 passive probe will have a 10 MOhm) input impedance at DC, however this impedance drops rapidly with frequency, passing below the input impedance of a transmission line probe at less than 100 MHz.

Total power subsystem integration 

• Ethernet communication 
• Full sub-system wiring 
• Single P.O. 
• Custom interface to suit customer requirements

The AL-4162 programmable positioner controller offers real-time control of positioning subsystems used in near-field and far-field antenna measurement systems. Typically, it may be configured to drive planar scanners and general purpose far-field positioners that are encoder-based or involve simultaneous motion.

• Image circle: 30 mm - 100 mm
• 11 focal lengths: 28 mm - 120 mm
• Covering a wide working distance range
• Lenses for specific magnifications available
• Very low distortion and high resolution
• V38-Mount, compatible to the V38 mounting system
• Initial apertures: F2.8 - F5.6