Focus Microwaves - Noise Measurement System Up to 170 GHz
Focus Microwaves introduces a cutting-edge noise measurement system comprising three integral components: the Input Noise Module (INM), Output Noise Module (ONM), and Noise Module Controller (NMC). This system extracts precise noise parameters, offering rapid, stable measurements and optimized performance with dedicated software for calibration and analysis.
Focus Microwave’s wide-band Noise Measurement system is a cutting-edge solution that covers an expansive frequency range from 0.5 to 170 GHz, making it one of the industry’s most comprehensive noise measurement systems available. This system is designed to facilitate the accurate extraction of the four essential noise parameters of a device under test (DUT):
- Minimum Noise Figure (NFMIN): Represents the lowest achievable noise figure of the DUT.
- Equivalent Noise Resistance (RN): Refers to the equivalent noise resistance presented by the DUT.
- Optimum Noise Reflection Factor (Magnitude, Phase): Indicates the optimum noise reflection factor of the DUT in terms of magnitude and phase for optimal noise performance.
The noise measurement system caters to both connectorized and bare die devices, offering versatility in device compatibility. Furthermore, it provides fast, precise, and stable measurements crucial for accurate noise analysis within the specified frequency range.
The system comprises three key components:
- Input Noise Module (INM)
- Output Noise Module (ONM)
- Noise Module Controller (NMC)
These modules work in tandem to improve precision and sensitivity in noise receiver performance, simplify system calibration procedures, and enhance the DUT measurement process. The direct probe mounting of the source tuner and the utilization of the new Delta series noise modules set a new standard in the industry, elevating sensitivity, expanding the dynamic range, and ensuring comprehensive coverage across a broad frequency band.
Models & Specifications
Setup
More Product Information
-
High SNR mode (up to 24 dB better signal-to-noise ratio)
-
Low-Noise Binning Mode
-
Smear reduction
-
Shading correction
-
Area of interest (AOI), separate AOI for auto features
-
Binning
-
Decimation
-
Auto gain (manual gain control: 0 to 32 dB)
-
Auto exposure (39 µs to 67 s)
-
Auto white balance
-
Look-up table (LUT)
-
Hue, saturation, color correction
-
Reverse X
-
Deferred image transport
-
Trigger programmable, level, single, bulk, programmable delay
-
Sequence mode (changes the camera settings on the fly)
-
SIS (secure image signature, time stamp for trigger, frame count)
-
Storable user sets
- Vector Network Analyzer Frequency Range from 10 MHz up to 3.2 GHz
- Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz
- -156 dBm/Hz Displayed Average Noise Level (Typ.)
- -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
- Total Amplitude Accuracy < 1.2 dB
- 1 Hz Minimum Resolution Bandwidth (RBW)
- All-Digital IF Technology
- Standard Preamplifier
- Distance to fault capability using VNA time domain analysis
- Up to 1.5 GHz Tracking Generator Kit
- Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc)
- 10.1 lnch WVGA (1024 x 600) Display
Focus Microwaves introduces a cutting-edge noise measurement system comprising three integral components: the Input Noise Module (INM), Output Noise Module (ONM), and Noise Module Controller (NMC). This system extracts precise noise parameters, offering rapid, stable measurements and optimized performance with dedicated software for calibration and analysis.
- Tiny “all-in-one” solution: no external control board needed
- Superior image quality: sub-micron lens movement with very low tilt. Now with higher dynamic stability
- Low voltage & power: 3.3 VDC input, zero power position hold
- Simple system integration: accepts high-level motion commands over standard serial interface (I2C or SPI)
- Flexible, production-ready system: compatible with M8 to M16 lenses and with typical image formats from 1/3” to 1/1.8”
- Lowest cost, fastest time to market: Fully-engineered “plug and play” solution
- Boost performance by up to 3x over its precursor thanks to an Intel x6000 series embedded processor
- Capture high-resolution images at high speed through a choice of CMOS sensors from two to 16 Megapixels
- Deploy in dirty, humid, or harsh industrial environments by way of a compact IP67-rated design
- Communicate actions and results to other automation and enterprise equipment via real-time digital I/Os, and Ethernet (TCP/IP, CC-Link IE Field Basic, EtherNet/IP™2, Modbus® , PROFINET® , and native robot interfaces)
- Handle Human-Machine Interface (HMI) function by way of VGA and USB connectivity
- Simplify vision setup and upkeep via integrated lens focusing and illumination intensity control
- Synchronize to the manufacturing line through the support for incremental rotary encoders
- Solve machine vision applications efficiently with Aurora Design Assistant by constructing flowcharts instead of writing program code
- Maintain control and independence through the ability to code custom flowchart steps
- Tackle machine vision applications with utmost confidence using field-proven tools for analyzing, locating, classifying, measuring, reading, and verifying
- Leverage deep learning for visual inspection through image classification and segmentation tools
-
Low Noise
-
Excellent line/load regulation
-
Remote sense
-
Coarse and fine voltage controls
-
Constant voltage or constant current operation with automatic crossover and mode indication
-
Individual On/Off switch per output (not including fixed output)
-
Variable ( 1.5V to 5V ) Auxiliary Output
-
Shrouded socket-compatible with bare wire and shrouded safety plug connections up to 4 mm
- Network Enabled Frequency Distribution Amplifier
- Dual Frequency Inputs with Auto Failover
- Low Phase Noise Reference Frequency Outputs
- Programmable per channel amplitude
- 1U 19” rack mount
- Redundant Hot Swappable Power Supplies
Focus provides the deepest portfolio of wideband fundamental and harmonic passive tuners. Passive impedance tuners generate controllable reflection factor (Impedance) across the smith chart over a given frequency range. Focus uses two basic technologies:
-
From 100MHz to 120GHz we use the slide screw technique in which a reflective probe is inserted into a low loss slotted transmission line.
-
For frequencies from 10MHz to 170MHz we use a lumped element technology, whereby variable capacitors are connected with optimized lengths of coaxial cable. To view our Low Frequency Tuners, Click Here!
Most Focus Passive Tuners use long lasting RF probes which are designed for optimal tuning accuracy and are free of spurious resonances. The combination of multiple probes provide ultra wideband coverage in one single tuner. All Focus Passive Tuners are LAN controlled and include on-board impedance synthesis firmware.
For more information on Passive Tuners, visit our youtube channel!
- IEC 61000-4-4 Ed.3 standard compliance.
- Pre-check function is installed. Inspection before testing is now easy.
- Normal mode test support. Taking account of field troubles is possible. (option)
- Utilize an outlet box that simplifies EUT connection. (option)
- Compared with conventional products, the size has become compact. (Approximately 67% by volume)
- Easy to understand Panel display reduces mistakes in connecting power cables.
- Software control with Windows. (option)
- Next calibration date can be notified. (Windows software only)
- Employ LCD screen with multi-language support and enhanced operability.
- Maximum output voltage of 5 kV and maximum pulse frequency of 2 MHz allow you to test above the standard test level.
- CDN capacity is increased to single phase type AC 240 V 20 A, single and three phase type to AC 600 V 63 A, supporting wider range of EUT.
- Large capacity CDN (100 A or 150 A) option available for Injection test on various EUT.
- Using coupling clamps, EMS probe kits, you can test the signal lines and evaluate the noise immunity on the PCB. (option)
Focus Microwaves
Focus Microwaves is a pioneering engineering company, built around the innovations of its founder Dr. Christos Tsironis who developed his first manual tuner in 1973 and is the inventor of most existing electro-mechanical tuner families. The success of Focus is based on the engineering and manufacturing skills of its highly motivated and experienced team of engineers and technicians, who have been trained and encouraged to develop new technologies. In addition, listening to our customers needs and insights helps us discover and develop new and measurement methods on an ongoing basis, relentlessly pushing the limits of what is possible.
From humble beginnings in 1988, Focus has become the main supplier of advanced Load Pull and Noise Tuner Systems. Our mission is to provide effective, reliable and innovative solutions for non-50 Ohm testing (Noise and Load Pull) of RF microwave transistors, thus enabling our customers to compete in the marketplace with better designs and to advance the understanding and knowledge of the field.
Contact Details
Focus Microwaves Inc. Main Head Office
4555 Chem. du Bois-Franc, Saint-Laurent, QC H4S 1A8, Canada
Phone: +1-514-684-4554
Test & Measurement
Download Line Card
