IntelliPower - FA10509 Power Distribution Unit
-
500 Watts, 12 VDC Input and Output, 9 Toggle Switched Circuit Breakers, 4 Position Input Terminal Block Strip, and 6 and 10 Position Output Terminal Block Strips
TYPE | SPECIFICATION |
---|---|
Power Rating | 225W |
Chassis Configuration | 2U, ≤23"D |
Input Voltage | 120 or 230 VAC |
Input Frequency | 50/60 |
Input Connector | Terminal Block |
Output Voltage | 120 VAC |
Output Frequency | 50/60 |
Output Connector | Pigtail |
More Product Information
-
UPS: 6000VA, 4800W, 220Vac 50Hz Isolated Input, 220Vac 50Hz Output. Freq Changer, EBP, 3U25.6, Aluminum, Cir Mil, SNMP, Relay Output, 2 x 2x2 Anderson, 2 x Cir Mil
-
2000VA, 1500W, 120/240VAC 50/60Hz Input and 120VAC 60Hz Output UPS
-
2000VA, 1400W Output, Double Conversion, Rugged, High Temperature, Global Wide Range, PFC Input, 85 to 265VAC Input, 50/60Hz Input, Online UPS Providing 120VAC, 50/60Hz Output with approximately 27-minute Battery Back Up, Power Factor Correction, Power Conversion and Power Conditioning in a 4U Aluminum Enclosure
-
Reduce corporate-wide software overhead and time to production
-
Standardize on ONE common, open-platform interface for all internal RF/Microwave or power projects
-
Modular design allows for scalable solutions in increments of 72 high-current sink, 12 reset/control and 32 TTL I/O channels
-
Design based on Industry Standards (LXI and IVI drivers) to ensure interoperabilty and ease of use
-
Graphical web-based command and control simplifies RF/Microwave system design and debug
-
Enhanced maintenance capability through tracking of relay cycle counts and remote monitoring of fault conditions
-
Low output capacitance
-
High bandwidth up to 30kHz
-
High resolution I-V curve simulates static and dynamic conditions
-
Designed for high speed Maximum Power Point Tracking (MPPT)
-
Can be integrated into a multi-channel system for higher power testing
-
Low voltage, high bandwidth version for DC Power Optimizers
-
EN50530 support
-
Double Conversion, Online, Global Input, Extreme High Temperature UPS for Industrial Applications
-
Sony IMX542 CMOS sensor
-
Power over Ethernet option
-
Angled-head and board level variants
-
Video-iris lens control
-
Monochrome (G-1620B) and color (G-1620C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Analog programming
-
Zero voltage “soft switching”
-
Constant voltage or constant current operation with automatic crossover and mode indication
-
Standby/Remote/Local modes
-
Front panel button preview of voltage, current, OVP
-
Remote sense, 5 V line loss compensation
-
LabVIEW® and LabWindows® drivers
-
Supports link widths up to 16-lanes
-
Operates up to 32GTps, PCIe 5.0 data rates
-
Downward compatible with PCIe 1.0, 2.0, 3.0 and 4.0, and data rates of 2.5, 5.0, 8.0 and 16GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 16-lane PCB finger connector installs into host test system’s 16-lane PCIe slot
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning effort
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Interposer power is independent of host system. A 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the 16-lane Card Electro-Mechanical (CEM) specification
-
Size: 230mm deep x 185mm tall x 15mm thick
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form