-
This ultra high intensity line light series is built to handle the most extreme line scan lighting requirements.
-
Provides an intensity level of 2,100 klx (working distance of 75 mm).
-
Pre-engineered for expandability in 150 mm (6”) increments up to 2400 mm (94.5”).
-
Available in multiple wavelengths.
-
In the event of abnormally high ambient temperatures, the device automatically shuts down when the housing reaches 60°C and resumes operation at 56°C.
-
Note: Requires third party power supplies – refer to spec sheet.
Junkosha - 1 Series cables - Wide Temperature Range, Slim and Durable
-
MWX121 - Heat Resistant - offers a wide temperature range from -65 to +125°C.
-
MWX122 - High Durability - offers excellent cable durability against repeated bending.
Cable type |
Maximum Usable Frequencies |
Standard Insertion Loss (dB/m) |
Outer Cable Diameter (mm) |
Cable Weight (g/m) |
Continuous operating temperature (°C) |
Assembly length (mm) |
||
---|---|---|---|---|---|---|---|---|
18.5GHz |
Maximum frequency |
Min |
Max |
|||||
MWX121 |
26.5 GHz |
1.2 |
1.3 |
6.6 |
80 |
-65~+125 |
200 |
5000 |
MWX122 |
1.5 |
1.9 |
6.5 |
79 |
-65~+85 |
300 |
3000 |
|
MWX161 |
67 GHz |
3.5 |
7.3 |
6.5 |
79 |
-65~+125 |
600 |
1500 |
This table provides standard length availability within our catalog. We can provide custom lengths upon request; please contact us to discuss.
Features
- MWX121, MWX161: Suitable for a wide continuous operation temperature range (-65°C to +125°C) in microwave measurement environments
- MWX122: Dramatically improved mechanical life
Use
- For microwave band measurements requiring a wide temperature range (device assessment, etc.)
- Testing equipment requiring durability
- Multiport vector network analyzers
Slim Phase Stable
Cable MWX161 Cable assemblies with a small diameter at the neck, making it the most suitable for a Multiport VNA.
Heat Cycle Test for MWX121
The cycle indicated above chart was repeated 30 times. We measured the insertion and return loss of the specimen that was taken out from the tester after the 30 cycles.
Composite Durability Test for MWX122
We measured the insertion loss and observed the shield after the composite durability test that applies 50,000 times of bending, rubbing, and twisting.
More Product Information
-
Redundant design with multiple signal paths built in for high-availability.
-
12 expansion slots in the 2U version and 5 expansion slots in the 1U variant.
-
Industry-first GPS integrity checking
-
Unique optical crosslink architecture for either Master-Slave hierarchical setups or Master-Master crosschecking and failover
-
2U version is operated by an intuitive touch-screen interface, a first for any master clock system.
-
All components are hot-swappable and are dual redundant.
-
The Output Signal modules are hot-swappable from the front and minimize the need to disconnect cables.
-
Part of the MicroBrite™ family of high performance, compact machine vision lights.
-
Our DF196 Series delivers direct illumination at a low angle to cast shadows used to identify surface defects, embossed text, etc.
-
This dark field ring light is more directional and less diffuse than the DF198.
-
Available in 4 sizes with an intesity of 72kLux (working distance of 25mm with DF196-100)
-
Part of the MicroBrite™ family of high performance, compact machine vision lights.
-
Provides diffuse illumination at a low angle to cast shadows used to identify surface defects, embossed text, etc.
-
This ring light is more diffuse and less directional than the DF196.
-
Can be used to produce a bright field effect when the outer diameter is smaller than the working distance.
-
Available in 4 sizes with an intensity of 47klux (working distance of 64mm with DF198-180).
-
Operates up to 16GTps, PCIe gen-4 data rates
-
Downward compatible with PCIe gen-1, gen-2 and gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
SFF-8674 host and target connections support PCIe links of up to 4-lanes
-
Multiple Interposers can be used with links to 16-lanes.
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer plus two cables for DUT attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal capture and triggering in multiple formats
-
Two coax cables supplied for optional clocking sources
-
Interposer power is independent of host system.
-
A 120/220 AC in, 12V/3A DC output converter is included
-
LEDs give quick indication of power and status
-
Size: (L x W x H): 112 x 150 x 30 mm (incl. rubber stands)
-
Works together with VIAVI Xgig 4K Analyzer platforms
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data traffic
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
High Power AC Source
-
Programmable AC power for frequency conversion and product test applications
-
-
Expandable Power Levels
-
Available output power of 30, 45, 75 and 90 kVA per unit and multi-unit configurations for power requirements up to 180 kVA and above
-
-
Remote Control
-
Standard RS232, USB and IEEE-488 (GPIB) and optional LAN interfaces are available for automated test applications.
-
-
Back-lit Flat Diffuse Lights provide a space saving design for the illumination of highly reflective objects.
-
Two aperture diameters are available, .88” (22.3mm) and 1.75” (44.5mm).
-
For similar performance in a thinner housing, refer to our Edge-lit Flat Diffuse Lights (FX Series).
-
Available in visible and infrared wavelengths with an optional polarizer.
-
Provides light intensities of up to 11.7kLux at 4” (102mm) standoff.
-
Pre-engineered, expandable sizes are available from 3”x 3” (76mm) to 22”x 34” (559 x 864mm) in 1” (25mm) increments.
-
Collinear design
-
Two measurement ports (0° and 90°)
-
Potential to use both ports at once
-
Fiber coupled for ease of movement
-
Compact design allows access to confined locations
-
External connections for ease of use
-
Single fiber umbilical simplifies connection
-
Multiple lenses available
-
Robust mechanical design
Junkosha, Inc.
Junkosha is a pioneer of sophisticated fluoropolymer application technologies across a broad selection of industries, including the microwave interconnect sectors.
Our mantra – indeed the name Junkosha – is based on three Japanese characters that spell out the fact “we contribute to society’s development through technology”. This is taken one step further in our relationship with customers, partners and suppliers whereby our mission is to “enable technology innovators” through our products and the way we do business.
Reflecting our corporate motto of “delivering unsurpassed value,” Junkosha continually focusses on activities that address the unmet needs of our customers worldwide. Across the company, Junkosha delivers products that are of the highest quality, this in turn calls for the highest performance and diligence from staff and partners. In order to realize this, Junkosha strives to anticipate customer needs while achieving complete customer satisfaction. Every day, we are challenged to “develop advanced technologies”, “improve our products’ capabilities", and “seek new applications”. We respond to our customer’s requirements quickly, responsively and cost effectively.
Contact Details
Junkosha Inc. Japan Office - Tokyo Business Center
15F Ochanomizu-Kyoun Bldg., 2-2 Kanda-Surugadai, Chiyoda-ku, Tokyo, 101-0062, Japan
Phone: +81-3-3518-6520
Fax: +81-3-3518-6523
Junkosha USA Inc. West Coast Office
2415 Campus Drive, Suite 140, Irvine, CA 92612, USA
Phone: +1-949-825-6177