Maturo - BAM 4.0-P Boresight Antenna Mast, 4m
- Boresite -18.5° to +45°
- Height range 1.0 - 4.0m
- Pneumatic polarization change 90°
- Electric stepper motor height
The Boresight Antenna Mast BAM 4.0-P is suitable in magnetic absorption chambers. The antenna mast, with the exception of the drive unit, is fabricated from plastic (PVC and reinforced fibreglass). The BAM 4.0-P has additionally an electrical tilt function from -18.5° to +45°, which automatically tilts during height scan. The tilting angle can be adjusted easily in accordance with the distance of the antenna to the EUT.
Metal parts are located only in the base plate and the drive mechanism (max. 0.3 m above ground level).
Antenna Adapters for all commercially available antennas are available upon request. All antennas during polarization rotate around their axis to eliminate any elevation errors. The LAN (TCP/IP) - interface provides an additional control option for all functions, when operated with the FCU 3.0 or NCD Controller.
Specifications
|
Technical Data |
|
|
Antenna height automatic adjustable |
1.0 m - 4.0 m |
|
Total mast height |
4.5 m |
|
Load capability Non-tilited Load capability Tilited |
max. 12 kg (when balanced) max. 6kg (when balanced) |
|
For long and heavy antennas, a counterweight is required to balance the load. Depending on the distance of the antenna gravity center |
|
|
Material of antenna mast |
Plastic and reinforced fiberglass |
|
Mast cross-section |
101 mm x 95 mm |
|
Base L x W |
1.3 m x 0.7 m |
|
Position speed adjustable |
|
|
in combination with FCU3.0 |
1.0 cm/s - 35 cm/s |
|
in combination with NCD |
1.0 cm/s - 35 cm/s |
|
Position accuracy |
+/- 0.5 cm |
|
Pneumatic polarization |
0° / 90° (vert. I hor.) |
|
Polarization time |
approx. 3 s |
|
Polarization drive |
Pneumatic rotary actuator |
|
Control |
Solenoid valve |
|
Nominal pressure |
max. 6 bar |
|
Motor |
DC stepper Motor |
|
Antenna support drive Material of toothed belts |
Toothed belt Kevlar-reinforced (non-metallic) |
|
Voltage |
110 VAC - 230 VAC, 50 Hz / 60 Hz single phase |
|
Current consumption |
max. 16 A |
|
Required RCD |
300 mA |
|
Control cable |
Fiber optic lines |
|
Remote control via |
LAN (TCP/IP); (IEEE only with NCD) |
|
Interference suppression |
20 dB under limits DIN EN 55011:2018-05 class B |
|
Temperature working range |
10°C – 35°C |
|
Total weight |
approx. 75 kg |
|
Accessories |
Service manual 3 m power supply cable 15 m pneumatic air hose 8 mm 1 x pneumatic feed through |
|
Controller |
FCU3.0 or NCD Controller |
Controller Types
|
Picture |
|
|
|
|
|---|---|---|---|---|
|
# of Devices |
8 |
4 |
1 |
1 (one axis) |
|
Display |
5.7" touch |
No |
No |
No |
|
HSU3.0 |
Included
|
Included
|
Included
|
Included
|
|
Software |
mcApp
|
mcApp
|
mcApp
|
mcApp-lite
|
|
Interface |
IEEE 488.2, LAN, (option:USB,RS232,..) |
LAN |
LAN |
LAN |
Antenna Adapter
Antenna Adapters for all commercially available antennas are available upon request. During polarisation, all antennas rotate around their axis to eliminate elevation errors. Please specify what antennas you have.
|
Mounting |
Clamping System |
|---|---|
|
Versions |
Also for HD, Frankonia and Inn-co masts |
More Product Information
- Comprehensive Test Solutions - Our CTS 4.0 Series offers complete test solutions for emissions and immunity compliance testing of AC and DC power products, ensuring your products are ready for global markets.
- Single & Three Phase Operation - Offers flexibility
- Direct PC Bus Access - Provides high sampling rate and resolution for accurate measurements and high-speed data transfers
- PC-Based Harmonic & Flicker Testing - Provides real-time full-color data display updates and continuous PASS/FAIL monitoring
- Supports Global Standards - Supports European and Japanese standards
- Easy To Use Interface - Provides IEC test setup, data analysis, display, MS Word test reports, and data files generated in MS Excel format
- High Resolution - Data storage to disk for post-acquisition analysis and reporting
- Single Step - Single Step and Fast Forward replay of recorded test data at 200 mSec
The industrial manufacturing industry has been a sector of constant innovation for centuries, continuously leveraging the data from frequent iterations to achieve new solutions. This is no different today, driven by advancements in automation, the adoption of Industry 4.0 technologies, the integration of IoT, and the shift towards sustainable manufacturing practices. These trends require the development of new testing protocols, thorough safety standards, and sophisticated quality control measures to ensure the reliability and efficiency of increasingly complex systems. Manufacturers must also address interoperability and cybersecurity challenges posed by interconnected devices and digital supply chains. Add the push for eco-friendly, sustainable manufacturing practices in conjunction with rigorous testing for compliance with environmental regulations, and achieving balanced testing facility solutions is no easy task.
High-speed, high-capacity, and scalable rugged NVMe storage solutions delivering enhanced performance alongside evolving applications and programs.
*Available in 1U-3U height with high core count CPUs, high-end GPUs and accelerator cards, and PCIe 4.0/5.0 interfaces. GPGPU-accelerated RAID also available.
- 3,000kg capacity
- Adjustable axle length and width
- 120k/hr max speed dynamometer
- Boresite -18.5° to +45°
- Height range 1.0 - 4.0m
- Pneumatic polarization change 90°
- Electric stepper motor height
Configurable and SWaP-C optimized with maximum storage capacity, processing power, and intelligence, our ruggedized, TAA-compliant BAM servers are the perfect solutions to accelerate and sustain ever-evolving applications
- Leading Performance CPUs - Supports dual Intel® 3rd, 4th & 5th Gen Xeon® SP CPUs with hardware-based encryption for enhanced compute and networking.
- High-end GPUs and FPGAs - Supports multiple double-wide, high-end Intel® and NVIDIA® GPUs and FPGAs to accelerate AI/ML/DL workloads at the edge.
- Fast NVMe SSDs - Supports up to 8 high-speed NVMe or 9 SAS/SATA SSDs to increase read/write speeds (FIPS 140-2/3 available).
Absolute EMC
Absolute EMC LLC is a premier North American provider of electromagnetic compatibility (EMC) expertise and test equipment. They deliver end to end consulting—covering IEC, MIL STD, CISPR, and automotive standards—hands on training for all EMC and RF test instruments, and turnkey test system design and integration. Leveraging decades of experience with every major manufacturer and the latest technologies, they also offer strategic guidance on equipment selection, market trends, and procurement to help you maximize the performance and ROI of your EMC investments.
Contact Details
Absolute EMC LLC
8240 Rugby Road, Manassas Park VA 20111, USA
Phone: 703-774-7505
Email: info@absolute-emc.com
Test & Measurement
Download Line Card
