The EH118 EMC Horn combines stable gain performance and low VSWR with wide band frequency operation. The horn is single linearly polarized with excellent cross-polar discrimination. The unique horn design suppresses any possible excitation of higher order modes in the aperture and maintains a well-defined smooth radiation pattern in the direction of the boresight axis throughout the operational bandwidth.

Specific application to Automotive. 

The Gold standard for EMC Anechoic Chambers, this 10 meter test range ensures EMC compliance testing Emission and Immunity testing and is compliant to ANSI C63.4/CISPR-16-1-4 with a Test Volume diameter of 4 meters or greater. The most versatile and accurate of EMC test chambers. Ferrite tiles and hybrid pyramidal absorbers allow for high accuracy and performance while meeting compact space requirements.

These AZ/EL/AZ positioners provide accurate, balanced rotation, and controllable velocity in the positioning of light-duty antennas under test. Their compact and low-profile design optimizes space in test configurations as well as high operational performance, yielding the best size and weight performance ratio.

Their rugged and straightforward construction ensures maximum reliability and trouble-free operation.

• Piezo stages with continuous 360° rotary motion 
• Mounted mirrors, laser and two-axis base 
• Each rotary stage only 11.75 x 21.9 x 16 mm 
• Closed-loop controller embedded in each stage 
  • No separate electronics needed 
  • 3.3 VDC input 
  • Direct digital input of motion commands ( I2C, SPI, or UART) 
• Angular resolution ~21.9727 mdeg closed loop 
  • Built-in absolute position sensor 
• Millisecond step and settle times 
  • 0.5 deg in 16 ms closed loop 
  • 0.5 deg in 1.2 ms open loop 
• Holds position with zero power and no jitter

AL-38000 model towers are suited for light duty applications with an operating load of up to 150 lbs (68 kg). This series is available with either a manual or motorized linear offset slide. Manual slides can be hand-pushed or hand-wheeled. The mast (vertical or inclined) is available in fiberglass or aluminum construction.

Very useful where space is restricted, the EMC chamber EMC-MC will settle into almost any office space. Its small overall size results from the use of our modular SmartShield chamber lined with our AEPH HyPyr-LossTM absorber technology requiring less volumetric space than in a traditional chamber. This mini compact EMC chamber is applicable in EMC pre compliance and general Research & Development RF testing.

DC, RF and Optical Probe Positioning for Highest Accuracy Measurements

FormFactor offers a wide variety of manual and motorized probe positioners for any application from DC to terahertz measurements and beyond.

Flexibility

• Different substrate carriers for wafers up to 200 mm or single dies
• Probe cards and/or up to eight positioners
• Use with liquid nitrogen or helium, depending on the target temperature
• Accessories available, such as black bodies and optical motion analysis tools
• Designed for industrial environments
• Covers wide range of measurements (I-V, C-V, RF, MEMS, OPTO)

See "Specifications & Details" tab for more key features

• Smallest rotary stage: 11.75 x 21.9 x 16 mm 
• Embedded closed-loop controller 
  • No separate electronics needed 
  • 3.3 VDC input 
  • Accepts direct motion commands (I²C, SPI, or UART) 
• Continuous 360° rotary motion 
• Angular resolution ~21.9727 mdeg closed loop 
• Built-in absolute position sensor 
• Millisecond step and settle times 
  • 0.5 deg in 16 ms closed loop 
  • 0.5 deg in 1.2 ms open loop 
• Holds position with zero power and no jitter