You design the future. We help you make it happen.
VTI Instruments - EX1200-7500 64 -Channel, 2 MHz, Digital I/O
- Eight ports of 8 I/O bits each
- High current capability for control of external relays, 300 mA sink
- Simulate and receive digital data at up to 2 MHz sample rates
- Selectable output voltages range from 3.3 V to 60 V
- Setup outputs and scan inputs as part of EX1200 measurement sequencing engine
The VTI Instruments EX1200-7500 is a high-performance I/O module with eight 8-bit ports (64 channels). Each port may be configured as an input or output under program control. The I/O may be single buffered, to provide real time data access, or double buffered, to provide synchronized data.
The EX1200-7500 has the flexibility to source the input and output clocks from the front panel allowing very large numbers of channels to be synchronized to collect or present data to a UUT. Additionally, input data can be timestamped to IEEE-1588 precision as part of the EX1200 scan engine. Deep on board memory (up to 1 MB) can be used to generate patterns on output channels at rates up to 2 MHz. In order to ease overall system cabling, all clamping diodes and open collector channels can be pulled up internally, rather than on a per channel basis.
Each channel can sink 300 mA, and includes built-in clamping diodes making this module ideal for driving and sensing external devices such as relays.
More Product Information
- Combine up to 16 SPDT or 8 multiport, high-performance relays in a 2U footprint
- Latching/Terminated options (EX7204L)
- LXI/LAN and USB command and control options
- Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
- Flexible API supports IVI and Linux development environments minimizing software investment
- LXI trigger event implementation provides seamless test synchronization with external devices
- Store up to 128 relay configurations for quick recall, including automatic power-up state
- Smallest size: 11.75 x 21.9 x 16 mm including controller
- Closed-loop controller embedded in micro stage
- No separate electronics needed
- 3.3 VDC input
- Direct input of motion commands (I2C, SPI, UART or analog servo)
- Angular resolution ~ 0.022 deg closed loop Absolute encoding and position feedback
- Millisecond step and settle times
- Point-to-point angular positioning with closed-loop bandwidth ~100Hz
- Holds position with zero power and no jitter
- Fast integration for embedded motion in smaller instruments
- Modular 6.5 digit DMMs for the EX1200 mainframes
- Tightly integrated into mainframes, allowing high-speed, synchronized scanning measurements without the need for external cabling.
- Input can be routed directly to the DMM or through an internal analog bus on the backplane.
- Super fast scanning with no processor intervention required
- Scanning configuration can be saved in the DMM’s non-volatile memory allowing quick recall of saved states
- Integrating ADC for with adjustable integration time depending on the level of accuracy required.
- “True RMS” AC readings
- Frequency and temperature measurements
- The Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
- PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
- Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
- High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
- Single Step and Fast playback mode of test results.
Flexibility
- Ideal for a wide range of applications such as RF, mm-Wave and sub-THz characterization, FA, DWC, MEMS, optoelectronic tests and WL
- Re-configurable and upgradable as requirements grow
- Minimizes setup times with no loss in performance or accuracy
- Seamless integration of various measurement instruments
Stability
- Solid station frame
- Built-in vibration-isolation solution for superior vibration attenuation
- Rigid microscope bridge
- Compact and rigid mechanical design
- Highly accurate measurement results
- Incorporates best-known methods
Ease of Use
- Ergonomic and straightforward design for comfortable and easy operation
- Low-profile design
- Simple microscope operation
- Quick and ergonomic change of DUT through pull-out stage
- Minimize training efforts
- Fast time to data
- Convenient operation
The VTI Instruments 16-Channel isolated high voltage measurement instrument
- 24-bit SAR ADC per Channel
- 128k samples/second/channel sample rate
- 1000V channel-channel isolation
- 500V channel-ground isolation
- Input voltage ranges peak: ±420V/±10V/±1V
- Data logger acquisition mode
- 3-Pin screw terminal input connector
- LXI ethernet interface
- IEEE-1588 synchronization
- Power over Ethernet (PoE+) or 12– 50 V DC input
- Simultaneous data streaming
- 8-bit bank isolated digital I/O
- Full-featured embedded web interface
- Compact 1U half-rack form factor
- High power density in 1U / 2U / 4U / 14U chassis up to 18kVA
- Intuitive touch panel control
- Innovative iX2™ current doubling technology
- Multi-language display for global operation
- Auto paralleling for higher power
- Single phase 1U models and 1 or 3 phase selectable 2U / 4U / 14U models
- Complete avionic test suites (optional)
- ATE version available in 1U, 2U and 4U models
- Standard LXI LAN, USB and RS232, optional GPIB
- Legacy CSW5550 Emulation on the AST6003A1 Model
- 8 frequency counter channels, 16 isolated digital I/O channels, 2 isolated DAC channels in a single card
- Single frequency measurement range that works from 0.05 Hz to 1 MHz
- Very stable TCXO base clock, 50 MHz ±1 ppm
- 195 kΩ Input impedance with selectable coupling (AC/DC)
- Wide differential input voltage range (±48 V) with up to 250 V working common mode voltage
- Programmable threshold and hysteresis levels with 1 mV resolution
- Support for quadrature encoder
- Isolated DIO channels with up to 60 V compliance
- Isolated and independent 16-bit DAC channels, configurable for voltage or current output
- Combine up to 12 fail-safe building blocks, dual SPDT, SP4T, SP6T, or transfer switch in a compact 1U footprint
- Front “pluggable” relays facilitate field maintenance
- Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
- Flexible API supports IVI and Linux development environments minimizing software investment
- LXI Trigger Event implementation provides seamless test synchronization with external devices
- Store up to 128 relay state configurations for quick recall, including an automatic power up state
- Define exclude lists to avoid setting an undesirable configuration
- Relay odometer tracks closures to facilitate preventative maintenance
VTI Instruments
Website
Data Acquisition, Signal Conditioning, Switching, Modular Instruments & VXI Mainframes
