VTI Instruments - SMX-4XXX series of Matrix Switches
The VTI SMX-4xxx Series of matrix cards deliver exceptional performance and reliability by implementing extensive signal path shielding, isolation and built-in health monitoring. Available models with software configurable switch subsystems increase flexibility and help control costs by allowing a single module to be used for different testing requirements. Embedded virtual schematic control further simplifies setup and debugging, allowing all relays to be engaged independent of application software.
Ideally suited for medium-to-high density automated test equipment (ATE) requiring multiple connection point flexibility, the SMX-4xxx Series provides uncompromised measurement integrity ideal for the most demanding aerospace, defense and automotive applications.
SMX-4410 | (4) 4x10, 2-wire, fully configurable |
SMX-4411 | (4) 4x10 2-wire Matrices |
SMX-4412 | (2) 4x20 2-wire Matrices |
SMX-4413 | (1) 4x40 2-wire Matrices |
SMX-4414 | (2) 8x10 2-wire Matrices |
SMX-4415 | (1) 8x20 2-wire Matrix |
More Product Information
-
24-bit, delta-sigma ADC, simultaneous sampling
-
Programmable Sample Rate up to 128kSPS
-
Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
-
Voltage Excitation: 0.5V to 10V
-
Current Excitation: 0.46mA
-
2-Wire & 4-Wire Ohms/RTD
-
Bridge Zero Balancing
-
Built-In-Self-Test (BIST)
-
Strain Lead Wire Calibration
-
Shunt Calibration: 50kΩ, 100kΩ & External provided by User
-
TEDS Support
-
LXI Ethernet Interface
-
IEEE-1588 Synchronization
-
Power over Ethernet (PoE) or 10–50 V DC input
-
Built-in Parallel Data Streaming
-
Full-featured Embedded Web Interface
-
Compact 1U Half-rack Form Factor
-
Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high speed data transfers, unlike competing IEC test systems which provide only limited throughput using IEEE-488.
-
PC based Harmonic and Flicker test software provides real-time full color data display updates and continuous PASS/FAIL monitoring.
-
Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
-
Simple user operation under Windows provides IEC test setup, data analysis, display and MS Word test reports.
-
High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of actual test.
-
Single Step and Fast playback mode of test results
-
4-Channel, 204.8 Ksa/s per channel, 24-Bit DACs
-
-115 dB spurious free dynamic range
-
Integrated 2-Channel 64-bit tachometer
-
Integrated 4-Channel DIO
-
Tight synchronization with DSA analyzers
-
Ideal for rotational measurement, and stimulus-response applications such as vibration test
-
Output modes including Sine, Burst Sine, Chirp, Burst-random and continuous random
-
Combination AC and DC Power Source
-
2Hz-7,990Hz Output Frequencies
-
Arbitrary and Harmonic Waveform Generation
-
Built-In Digital Power Analyzer
-
Scope Capture Capability
-
Power Programming Software
-
Constant Power Mode
-
Multi-Box Option
-
Up to 10 kM distance from PC to mainframe through fiberoptic interface
-
40 MB/s block transfer rates
-
Embedded Web Interface provides interactive utility to control instruments
-
Rack-Rack TTL trigger extension through on-board LXI Trigger Bus
-
Backward compatibility with VXI 1.4 and 2.0 products
-
External Clock In/Out with on-board options for TCXO/OCXO
-
VXI plug&play compliant
-
Large switching capacity in a small footprint
-
Switch up to 16 A current - highest in its class
-
High breakdown voltage (1,000 V rms between open contacts)
-
Ideal for applications such as high current/high power switching, AC line power switching, driving relays for industrial machinery, solenoid switching, and automotive engine control
-
Fail-safe interrupt inputs that can detect a fault condition automatically open up relays to their default state
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries