Webinar

Teledyne LeCroy eric_hi_speed_best_practices_webinar_1200x600
Oscilloscopes, Serial Data Links

Teledyne LeCroy - Best Practices for Designing High-Speed Serial Data Links Part 5: PRBS Sources and Best Oscilloscope Measurement Practices

-

In this webinar, Eric demonstrates high-speed serial link jitter and eye diagram measurements using easily obtainable and low-cost 5 Gb/s and 10 Gb/s sources. He describes best oscilloscope measurement practices for measuring eye diagrams and jitter and optimizing measurements for a given PRBS data rate, oscilloscope bandwidth and sample rate, and compares measured results to simulations using QUCS, PyAnsys, PySI, PyBERT, HyperLynx and MATLAB.

>>>Click here to register

Can't attend live? Register anyway and receive the recording when it's available.

Related Topics:

Videos

Teledyne LeCroy: Mixed Signal Oscilloscope - Measurement
Teledyne LeCroy: Most efficient validation of power sequences

Webinars

Pre-Compliance EMC Testing with a Real Time Scope
SI/PI on a Budget Webinar: Five Tricks to Get More out of your Oscilloscope
EMC / ESD Pulse Measurements Using Oscilloscopes Webinar
Fundamentals of Advanced Measurements and Math
4 Practical Real-world Examples of Embedded System Validation and Debug
Oscilloscope Coffee Break Series - Part 3: Getting Your Trigger to Do What You Want
How to Measure Power During Volt-second and Other Short Power Periods
Setting up Your Timebase and Using Memory Correctly Oscilloscope - Coffee Break Webinar Series
Optimizing Your Vertical Gain Oscilloscope - Coffee Break Webinar Series
How to Become an Expert in Automotive Ethernet Testing - Part 4: Debugging PHY Layer Link Communication Learning Lab
What Every Oscilloscope User Should Know About Transmission Lines
Testing Noisy Power Supply Outputs - Oscilloscope Coffee Break Webinar Series
How to Perform Customized Analysis With an Oscilloscope Part One: Fundamentals of Customized Analysis
How to Perform Customized Analysis With an Oscilloscope Part Two: Advanced Customization Examples
USB Type-C® Technologies Webinar Series Part 4: USB Type-C Sideband Physical Layer Testing
SI/PI Measurements on a Budget Webinar Part 4: How to Become an Expert in Power Integrity Testing
Zooming With an Oscilloscope – Zoom Waveforms and Timebase Adjustment
What is Oscilloscope Sample Rate and How Much Do I Need? by Teledyne LeCroy
How Much Memory Do I Need to Use in my Oscilloscope by Teledyne LeCroy
How Can I Reduce Noise on Signals Measured With an Oscilloscope? by Teledyne LeCroy
How is Rise Time Related to Bandwidth in an Oscilloscope? by Teledyne LeCroy
Teledyne LeCroy: How Do I Measure Current on an Oscilloscope Using a Shunt Resistor?
Teledyne LeCroy: How Do I Make a Differential Measurement on an Oscilloscope Using Passive Probes?
Teledyne LeCroy: How Do I Rescale a Sensor to Use With an Oscilloscope?
Teledyne LeCroy: How Do I Make an XY Display on an Oscilloscope?
Teledyne LeCroy: How Do I Make 3-phase Power Measurements with an Oscilloscope?
What are Oscilloscope ADC Effective Bits and ENOB?
High Speed Serial Data Debugging using a Digital Oscilloscope - Part 3
Teledyne LeCroy - What is the Difference Between a Real-time Oscilloscope and a Sampling Oscilloscope?
Teledyne LeCroy - How to Maximize Digital Oscilloscope Signal Integrity
Teledyne LeCroy - How Does an Oscilloscope Probe Affect My Oscilloscope Gain Settings, Accuracy, Noise, and Dynamic Range?
Teledyne Lecroy - Part 7: Getting the Lead Out – Expert Soldering Tips
Teledyne LeCroy - When Do I Need to Deskew Channels or Probes on an Oscilloscope?
Teledyne LeCroy - Oscilloscope Coffee Break Part 9: What is a Digital Phosphor Oscilloscope?
Teledyne LeCroy - Oscilloscope Coffee Break Part 10: How Do I Use Roll Mode on My Oscilloscope?
Teledyne LeCroy - How to Use an Oscilloscope for Control Loop Frequency Response Analysis
Teledyne LeCroy - Fundamentals of αβγ (Clarke) and dq0 (Park) Transformations - Part 1
Teledyne LeCroy - Advanced Transformations (dq0 Motor Rotor-reference Frame) and Application Examples - Part 2
Teledyne LeCroy - Part 1: How to Build a Great Measurement Foundation
Teledyne LeCroy - Part 2: How to Make Precise High-speed Oscilloscope Measurements
Teledyne LeCroy - How to test In-vehicle Networks (IVN) Part 3: How to Debug In-Vehicle Network (IVN) Bus Systems Using Oscilloscopes
Teledyne LeCroy - How to Synchronize Remote Clients with Teledyne LeCroy Oscilloscopes
Teledyne LeCroy - PAM4 Measurements Through Lossy Channels - Why Oscilloscope CDR Emulation Matters
Teledyne LeCroy - How to Decode USB Power Delivery Messages using an Oscilloscope

White Papers

Teledyne LeCroy: Enhanced Sample Rate Mode Measurement Precision
Teledyne LeCroy: Technologies for Very High Bandwidth Real-time Oscilloscopes
Teledyne LeCroy: All-ETDM 80-Gbaud (160-Gb/s) QPSK Generation and Coherent Detection
Teledyne LeCroy: Using a Digital Oscilloscope for Signal Analysis Including A Practical Example of PLL Characterization
Teledyne LeCroy: Coherent 1200km 6x6 MIMO Experiment using LabMaster
Teledyne LeCroy: Mode-Equalized Raman Gain Experiment using LabMaster