• 9 kHz to 9/14/20/26.5/32/43.5/54 GHz
• DANL: -164 dBm (with preamp)
• TOI: +20 dBm (typical) Analysis bandwidth: 150 MHz
• Amp range: DANL to +30 dBm
• Phase noise at 1 GHz: -110 dBc/Hz @ 100 kHz offset (typical)
• Demodulation: 5GNR, LTE FDD/TDD, RF, and modulation quality plus SSB signal analysis
• Resolution bandwidth (RBW): 1 Hz to 10 MHz
• Sweep Speed: 40 GHz/second (full span)
• RTSA bandwidth: 22, 55, 120, 150 MHz (option dependent)
• Amplitude accuracy: < 14 GHz ± 1.3 dB (± 0.5 dB, typical)
• Zero span with 60 ns minimum span
• IQ capture and streaming
• AM/FM modulation quality measurements
• Built-in PDF/HTML report generation
• EMF Measurements
• Uplink/Downlink interference analysis
• Interference hunting
• Channel Scanner
• Coverage Mapping

• Frequency Ranges: 9 kHz to 9 GHz, 13 GHz, and 20 GHz
• Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Mask, Spurious Emissions, Field Strength
• 3G and 4G Measurement options for LTE (FDD & TDD), CDMA, W-CDMA, WiMAX, GSM, and TD-SCDMA
• Interference Analyzer: Spectrogram, Signal Strength, RSSI, Mapping
• Dynamic Range: > 106 dB in 1 Hz RBW @ 2.4 GHz
• DANL: –164 dBm in 1 Hz RBW @ 1 GHz preamp On
• Phase Noise: –112 dBc/Hz @ 10 kHz offset at 1 GHz
• 1 Hz to 10 MHz Resolution Bandwidth (RBW)
• Tracking Generator up to 20 GHz
• PIM Hunting
• PIM Alert (a downloadable easyTest™ script)
• Standard three-year warranty (battery one-year warranty)

• First portable spectrum analyzer to provide continuous frequency coverage to 170 GHz
• Broadband mmWave capabilities for radio astronomy, automotive radar, wireless backhaul, 802.11ad, satcom, and more
• Ultraportable form factor enables measurements right at the device under test
• Measure: channel power, adjacent channel power, occupied bandwidth
• Patented NLTL technology provides > 100 dB dynamic range
• -141/-136/-129/-122 dBm DANL to 90/110/145/170 GHz ( Spectrum Master MS2762A)
• Up to 6 traces, 3 trace detectors, and 12 markers
• Standard three-year warranty

• Provides ±0.3 dB (typ.) total level accuracy
• 9 kHz to 3.6 GHz/6 GHz/13.5 GHz/26.5 GHz/43 GHz frequency range
• Various options can be installed
• Spectrum analyzer supporting built-in signal analyzer with FFT technology, vector signal generator, analog signal generator and audio analyzer (options)
• Offers modulation analysis, such as LTE, W-CDMA, WLAN, Vector Modulation and Analog Modulation (with optional software)
• Excellent eco-friendly product with low power consumption of 110 VA min.

• Frequency range of 9 kHz to 3.6 GHz/6 GHz/26.5 GHz/44.5 GHz; 44.5 GHz max. built-in preamp option
• Best close-in phase noise performance in middle range signal analyzer/spectrum analyzer: 
  • –123 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with all frequency models) 
  • –138 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with 3.6 GHz and 6 GHz models, meas.) 
  • –140 dBc/Hz (at 150 MHz center frequency, 10 kHz offset frequency with 3.6 GHz and 6 GHz models, meas.)
• 31.25 MHz analysis bandwidth (standard); 125 MHz max. (option)
• All-in-one solution with built-in signal generator option supports TRx tests (with 3.6 GHz and 6 GHz models)
• Measurement applications (options): Phase Noise Measurement, Noise Figure Measurement, Vector and Analog Modulation Analysis, BER Measurement, Pulse Radar Measurement Function

For next-generation broadband and multicarrier communication system, such as 5G mobile and broadcast satellites

• Built-in 5G measurement software supports efficient development and production
  • All-in-one 5G NR/V5G (sub-6 GHz/mmWave) coverage
  • High EVM performance due to wide dynamic range (EVM: <1%)
  • One-button dynamic-range optimization at EVM measurement
  • Multicarrier batch (all-at-once) analysis
  • Amplitude/phase/timing difference measurement for each carrier
• Maximum analysis bandwidth: 1 GHz
• Excellent amplitude and phase flatness performance
• Wide dynamic range measurement: >140 dB
• Long-term capture using large memory
• With PCIe/USB3.0 connector equipped
  • Transfers captured data to external PC at faster speed than 1000BASE-T

• All Digital IF technology 
• 10.1” WVGA (1024 x 600) Display 
• Frequency range from 9 KHz up to 3.2 GHz 
• -161 dBm/Hz Displayed Average Noise Level (Typ) 
• -98 dBc/Hz @ 10 khz Offset Phase Noise (Typ) 
• Total Amplitude Accuracy < 0.7 dB 
• 1 Hz Minimum Resolution Bandwidth (RBW) 
• Comes with Preamplifier