By Frequency Range 

The Schwazbeck Biconical elements come in many sizes and offer different performances depending on what your needs are. For best low-frequency performance (good gain, low antenna factor), larger elements work better. The downfall of larger elements is handling or fitting in the test space. Many situations may not need outstanding performance with larger elements. The benefits of these elements and antenna baluns are that they all use the same connections (10mm), allowing for versatile sharing/switching of elements. No need to purchase a new antenna; get new elements. 

The broadband horn antenna BBHA 9120 D is a linear polarized double ridged horn antenna. 

(0.8) 1 GHz to 18 GHz

N - female 

TRILOG Broadband Antenna, Combination antenna, Bicon+Log 

30 MHz to 7 GHz 

100 Watts 

Ideal Broadband antenna for Emissions measurements to CISPR 16 and many others 

Vertikal Active Rod Antenna 

9 kHz - 30 MHz 

BNC

reduced noise floor 

5

with mounting nut for AM 9144 and rechargeable battery 

Meeting requirements of MIL-STD-461, CISPR 25, and others 

Quick find for Absolute EMC antennas 

Run your mouse over the below images 

Click on what you want to see 

The STLP 9129 Special was specially designed for wideband immunity tests. This unrivaled bandwidth was achieved by combining both well-proven antenna designs STLP 9128 D and STLP 9149. The STLP 9129 Special does provide the optimum gain and field uniformity at the same time, as well as both basic antennas, do. Main Application: Generation of defined high field strength levels for radiated immunity testing acc. IEC 61000-4-3. 

70 MHz to 10 GHz 

gain of 8.6 dBi, ripple of less than +/- 2.3 dB 

Type N female or Type 7/16 female 

The broadband horn antenna BBHA 9120 L is a linear polarized double-ridged horn antenna. 

3 GHz to 40 GHz. 

2.92 mm - female 

The STLP 9129 was specially designed for wideband immunity tests. This unrivaled bandwidth was achieved by combining both well-proven antenna designs STLP 9128 D and the STLP 9149. The STLP 9129 does provide the optimum out of gain and field uniformity at the same time as well as both basic antennas do. Main Application: Generation of defined high field strength levels for radiated immunity testing acc. IEC 61000-4-3. 

70 MHz to 10 GHz 

gain of 8.6 dBi, ripple of less than +/- 2.3 dB 

Type N female or Type 7/16 female 

Highly Accurate Antenna for Exposure evaluation next to mobile communication facilities e.g. GSM and UMTS base stations Accurate RF radiation safety measurements e.g. nearby broadcast stations or in buildings 

The broadband horn antenna BBHA 9120 J is a linear polarized high gain antenna. The gain increases from 11 dBi at 1GHz up to more than 20 dBi at higher frequencies. 

800 MHz to 6.2 GHz 

N (optional 7/16) 

Gain 11 dBi - 20 dBi 

BBHA 9120 F is a linear polarized double-rigged broadband horn antenna made of aluminum for receiving and transmitting applications. An optional 7-16 connector is available for high-power applications. 

0.2 GHz to 2 GHz 

N - female 

7/16 - female (optional) 

10kHz to 30MHz 

Adjustable height 1.5 to 3.5m Strip-line 

Full vehicle testing 

Mil-STD-464 & ISO 11451-2 

Broad-Band Horn Antenna 

15 - 26.5 (40) GHz 

SMA-compatible connector 

Stacked Logarithmic-Periodic Broadband Antenna for Linear polarised RX- and TX- applications in the microwave frequency range. The antenna structure is made of laser-cut brass. For the protection of the fine antenna structure against damage, the antenna is equipped with a low loss plastic protection cover. The STLP 9149 is especially suitable for Immunity Testing acc. to IEC 61000-4-3 because of its good field uniformity. 

(0.6)0.7-9 (10.5) GHz 

Gain 10.3 dBi +/- 1.5 dBi 

Type N female 

The Precision Omnidirectional Dipoles POD 16 and POD 618 are fully compliant to CISPR 16-1-4 for site validation above 1 GHz. The POD 16 and POD 618 are precision broadband dipole antennas with conically shaped radiation elements covered by an RF-transparent radome. This rugged construction enables an excellent dipole-like radiation pattern up to 18 GHz. 

Precision Loop Antenna The PLA-R antenna is an active, battery-powered loop antenna for fully compliant radiated disturbance measurements. Due to the broad frequency range from 9 kHz to 30 MHz, it is suitable for all emission standards. A very low noise floor allows for compliance measurements with low limits. Furthermore, the passive operation mode ensures that strong emissions e.g. from wireless charging applications don't overload the preamplifier. With the integrated tripod, positioning is convenient and fast as the loop antenna needs to be oriented in x, y, and z orientation. Two integrated laser pointers support the alignment. 

The PLA set consists of two active, battery powered loop antennas intended for site validation. With the broad frequency range from 9 kHz to 30 MHz it is suitable for Normalized Site Attenuation (NSA) measurements and Shielding Effectiveness (SE) measurements. 

Immunity tests on automotive devices to ISO 11452-5 and SAE J1113-23. 

Use in ordinary facilities. No Chamber required 

Available in 50 and 90 ohm versions 

DC to 1 GHz range 

Small biconical microwave antenna 

(1) 3 - 18 GHz 

Compliant with CISPR 16-1-4 for site validation above 1 GHz 

Including transport case 

10 W 

VHBD 9134antenna holder/balun in combination with required elements:

• Biconical Elements: BBLA 9136 

• Open-Cone Elements: BBFA 9146, FBAL 9178, BBAE 9179

high power antenna holder/balun 

50:200 Ohm 

20-200 MHz, 2.5 kW, Type N (f) Optional: 7/16-female 

VHBD 9133 antenna holder/balun in combination with required elements: 

• Biconical Elements: BBA 9106, BBLA 9136

• Open-Cone Elements: BBFA 9146, FBAB 9177FBAL 9178, BBAE 9179

high power antenna holder/balun 

50:200 Ohm 

20-300 MHz, 1 kW, Type N (f) 

VHBB 9124 antenna holder/balun in combination with required elements:

• Biconical Elements: BBA 9106, BBLA 9136, BBAK 9137, BBVK 9138

• Open-Cone Elements: FBAB 9177, FBAL 9178, BBFA 9146

Better antenna factor for lower frequency end 

50:200 Ohm 

20-600 MHz(dependent on elements), 10 W, Type N (f) 

The Schwarzbeck line of biconical antennas is ideally suited for EMC testing. The interchangeable design can be paired easily with different elements for different applications. The kits offered here make the selection process simple and straight forward. Testing < 150 MHz and at 1 or 3 meters in the near field of each antenna becomes difficult to predict, especially in small chambers. 

The use of these kits gives many antenna options in a single solution. With the alternative element options, the possibility of finding a better match to your chamber and requirements increases. 

Linear polarized Broadband TEM Horn Antenna (Aluminium) for receive and transmit applications, especially for generating radiated fields in close proximity immunity tests and UWB (ultra-wideband) measurements. A typical application is the IEC 61000-4-39 standard. 

Linear polarized Stacked Logarithmic Periodic Broadband Antenna with N- or 7/16connector for Receive and Transmit Applications. Main Application: Generation of defined field strength levels for radiated immunity testing. Further the cross-polar rejection of the STLP 9128 F is excellent. 

70 MHz to 1.5 GHz

gain of 8.6 dBi, ripple of less than +/- 2.3 dB 

Type N female or Type 7/16 female 

For immunity test on electronic equipment, buried object identification, wideband jammers 

Up to 41 kV/M at 10m 

Requency Range: 100MHz to 6GHz 

VHBD 9134-10 antenna holder/balun in combination with required elements:

• Biconical Elements: BBLA 9136

• Open-Cone Elements: BBFA 9146, BBA 9106

•  Folding Triangular Elements: TRI 0630

• Booster Coils BCOI 9180xW in 2, 3, 4, 5 turn versions

High power antenna holder/balun 

50 Ohm 

20-280 MHz, 10 kW, Type 13/30 connector - female 

BBHA 9120 C - 2-18 GHz Double Ridged Horn Antenna

2 GHz to 18 (20) GHz 

SMA - female 

The STLP 9128 E special is nearly identical like the STLP 9120 E but with folded longest elements and smaller structure angle. 

80 - 1700(2700) MHz 

Type N (female) or Type 7/16 (female) 

Highly Accurate Reference Antenna for Site validation measurements according to CISPR 16-1-4 in fully anechoic rooms 

(65)80-1500(3000) MHz 

Type 7/16 female 

Type N female 

The double telescopic antenna mast/tripod is continuously height-adjustable. The mast rods are made of glass fiber to avoid unwanted reflexions. The modular design makes it possible to use different telescope parts and it can be mounted on a mast foot made of stainless steel or one made out of low-reflective fiberglass. Both of them provide a secure stand and easy adjustment on uneven ground. Antennas or adapters can be mounted on the 3/8" male thread. 

VHBD 9134-4 antenna holder/balun in combination with required elements:

• Biconical Elements: BBLA 9136

• Open-Cone Elements: BBFA 9146, FBAL 9178, BBAE 9179

high power antenna holder/balun 

50:200 Ohm 

20-200 MHz, 4 kW, 7/16-female connector 

VHBB 9123 antenna holder/balun in combination with required elements:

• Biconical Elements: BBA 9106, BBLA 9136, BBAK 9137, BBVK 9138

• Open-Cone Elements: FBAB 9177, FBAL 9178, BBFA 9146

Better antenna factor below 50 MHz, also EMV application 100 W 

50:200 Ohm 

20-300 MHz(dependent on elements), 100 W, Type N (f) 

VHA 9103B antenna holder/balun in combination with required elements:

• Biconical Elements: BBA 9106, BBLA 9136, BBAK 9137, BBVK 9138

• Open-Cone Elements: FBAB 9177, FBAL 9178, BBFA 9146

Especially to measure very high field strength 

1:1 Balun 

20-600 MHz(dependent on elements), 10 W, Type N (f) 

Booster coils for varying the element loading of high power biconical 

Allows for better matching in low-frequency testing 

Helps compensate for chamber loading 

HFBA 9122 antenna holder/balun in combination with required elements:

• Biconical Elements: BBA 9106, BBLA 9136, BBAK 9137, BBVK 9138

• Open-Cone Elements: FBAB 9177, FBAL 9178

Especially to measure very high field strength 

1:1 Balun 

0.1-500 MHz(dependent on elements), 10 W, Type N (f) 

The broadband horn antenna BBHA 9120 B is a linear polarized double ridged horn antenna 

1 GHz to 10 (12) GHz 

Type N (Female) 

The broadband horn antenna BBHA 9120 A is a linear polarized double ridged horn antenna. 

800 MHz to 5 (10) GHz 

Type N (Female) 

Linear polarized Logarithmic Periodic Broadband Antenna combined with a 4:1 Broadband Dipole (Aluminium tubing) for Receive and Transmit Applications. 

The testing and performance evaluation of EMC test sites requires precision field-strength measurements. Seibersdorf is the European market leader in this business. We offer these measurements as an accredited laboratory. Since 1997 we are also present in the Asian market. Due to intensive investigation in this field during recent years many results have been adopted in international standards (e.g. CISPR 16 series). 

STLP 9128 C stacked Logarithmic Periodic Dipole Antenna 

(150)200-1500 (4000) MHz 

Type 7/16 female, Type N female 

The polarisation swivel fixture PDG 9211 allows changing the polarisation of larger horn antennas by a single person easily. With the four locking points, the antenna can snap in increments of 90° angles to horizontal or vertical polarisation. 

The broadband horn antenna HWRD 750 is a linear polarized double ridged horn antenna for receive and transmit applications made of aluminum with waveguide flange. 

7.5 GHz to 18 GHz 

Waveguide flange WRD750D24 

The broadband horn antenna HWRD 750 is a linear polarized double ridged horn antenna for receive and transmit applications made of aluminum with waveguide flange. 

6.5 GHz to 18 GHz 

Waveguide flange WRD650D24 

Pyramidal standard gain horn Antenna optimized for far-field gain 

1 - 2 GHz 

20 dBi Gain 

Pyramidal standard gain horn Antenna, optimized for far-field gain 

2 - 4 GHz 

20 dBi Gain 

Pyramidal standard gain horn Antenna optimized for far-field gain 

4 - 8 GHz 

20 dBi Gain 

Pyramidal standard gain horn Antenna optimized for 1-meter testing. 

1 - 2 GHz, 

20 dBi Gain 

Pyramidal standard gain horn Antenna optimized for 1 meter gain and testing. 

2 - 4 GHz 

20 dBi Gain 

Pyramidal standard gain horn Antenna optimized for gain at 1 meter 

4 - 8 GHz 

20 dBi Gain 

The stacked Log Periodic Dipole Antenna (Stacked LPDA) consists of two ordinary Log.-Per. structures. The excellent characteristics (flat gain over a large bandwidth, low SWR) of the ordinary LPDA designs could be maintained using the stacked LPDA design. The stacked design helps to focus the directional pattern of the H-plane somewhat, resulting in a typical gain improvement of 2.5 dB compared to an ordinary LP antenna. 

(65)80-3000(4000) MHz 

Type 7/16 female or Type N female 

The stacked Log Periodic Dipole Antenna (Stacked LPDA) consists of two ordinary Log.-Per. structures. The excellent characteristics (flat gain over a large bandwidth, low SWR) of the ordinary LPDA designs could be maintained using the stacked LPDA design. The stacked design helps to focus the directional pattern of the H-plane somewhat, resulting in a typical gain improvement of 2.5 dB compared to an ordinary LP antenna. 

(70)80-3000(4000) MHz 

Type 7/16 female or Type N female 

Mast Adapter for Antenna Mast System AM 9144 with 22 mm hole for most Antenna models. 

3/8" and 1/4" camera threads 

polarisation continuously adjustable 

Small biconical microwave antenna 

10 - 40 GHz 

Compliant with CISPR 16-1-4 and ANSI C 63.25 

Typ VSWR < 2.5:1 

50 W 

Stacked Logarithmic-Periodic Broadband Antenna for Linear polarised RX- and TX applications in the microwave frequency range. 

1 - 18 GHz 

gain of 9 dBi 

Type N female 50 Watts 

Linear polarized Logarithmic Periodic Broadband Antenna (Aluminium tubing) for Receive and Transmit Applications 

Linear polarized Logarithmic Periodic Broadband Antenna combined with a 4:1 Broadband Dipole (Aluminium tubing) for Receive and Transmit Applications. 

Linear polarized Logarithmic Periodic Broadband Antenna with Broadband Dipole (Aluminium tubing) for Receive and Transmit Applications. 

Indexing adapter RA 9215 for fast and precise polarisation change (90° steps) 

Mast Adapter for Antennas with 22 mm tube and indexing ring. 

3/8" and 1/4" camera threads 

Small biconical microwave antenna 

1 - 14 GHz 

Compliant with CISPR 16-1-4 for site validation above 1 GHz 

Typ VSWR < 2.5:1 

50 W 

VHF Half-Wave Dipole 

2 sets of telescopic elements 

30-300 MHz 

UHF Half-Wave Dipole 

2 sets of telescopic elements 

300-1000 MHz 

Tuneable UHF - Half -Wave Dipole 

with EMI -Balun 

0.75 - 2 GHz with 4 sets of elements 

LE = 180, 140, 100, 80 mm 

Tuneable UHF - Half - Wave Dipole 

with EMI - Balun 

1.0 - 3 (4) GHz with 6 sets of elements 

LE = 140, 114, 90, 72, 60, 48 mm 

VHF Precision Dipole 30-300 MHz 

2 sets of telescopic elements 

(mostly required in pairs) CISPR 16-1-5 

UHF Precision Dipole 

300-1000 MHz 

4 sets of telescopic elements 

(mostly required in pairs) CISPR 16-1-5 

Linear polarized half-wave dipole with 1:1 balun and fixed element length for field strength measurements at instrument landing systems (ILS). 

Frequency range: 

localizer: 108 - 118 MHz (LOC, LLC) 

glideslope: 320 - 340 MHz (G/S) 

Gain: 1.5 dBi 

Linear polarized half-wave dipole with 1:1 balun and fixed element length for measurements at TETRA (terrestrical trunked radio) networks. 

Frequency range: 340 - 480 MHz 

Gain: typ. 1.5 dBi 

Vertical passive rod antenna 

10 - 40 MHz 

possible rods: FBAB 9177, FBAL 9178, BBA 9106, BBAL 9136 

(rod must be ordered extra) 

Vertical passive rod antenna 

DC - 300 MHz 

0.5m rod delivered with the unit 

possible rods: BBA 9106, BBAL 9136, BBAK 9137, BBVK 9138, FBAL 9177, FBAB 9178, VHA 9103 

According to CISPR 16-1-6, CISPR 25 Ed4. 

Biconical VHF-UHF broadband antenna 

(30) 150 -1000 MHz 

5 Watts 

Biconical UHF broadband antenna 

(160) 300 -1000 (1100) MHz 

5 Watts 

Small biconical microwave antenna 

1 - 6 GHz 

Compliant with CISPR 16-1-4 for site validation above 1 GHz 

Including transport case 

20 W 

Small biconical microwave antenna 

80 MHz - 3 GHz 

Compliant with CISPR 16-1-4 for site validation above 1 GHz 

Including transport case 

20 W 

UBAA 9115 antenna holder/balun in combination with required elements: Biconical Elements: BBVU 9135, BBUK 9139 Open-Cone Elements: BAOC 9216, BBOC 9217

Extremely high symmetry, 4:1 

30 - 1200 MHz, 5 W, RX

UBAA 9114 antenna holder/balun in combination with required elements: Biconical Elements: BBVU 9135, BBUK 9139 Open-Cone Elements: BAOC 9216, BBOC 9217

Low-Loss, 4:1 

30 - 1000 MHz, 5 W, RX 

The radiation source 

complies to CISPR 25 Edition 4, 

"Long Wire Antenna" 

reference source to evaluate the suitability of absorber lined shielded enclosures (ALSE) 

Absolute EMC with strategic partners is offing Antenna Arrays for meeting the high demanding levels required by DO-160 CAT L and MIL-STD-464. Testing for HiRF High Intens Radio Fields up to and exceeding 7200 V/m with commercially available TWT Pulsed or Solid-state amplifiers. Antennas can also be used for HERO testing of MIL-STD-464 System-level requirements. 

1-2 GHz Gain @ 1m, 22.7 - 23.5 dBi Min 

2-4 GHz Gain @ 1m, 24 dBi 

4-6 GHz Gain @ 1m, 26 dBi 

Absolute EMC with strategic partners is offing Antenna Arrays for meeting the high demanding levels required by DO-160 CAT K and MIL-STD-464. Testing for HiRF High Intens Radio Fields up to and exceeding 5000 V/m with commercially available TWT Pulsed or Solid-state amplifiers. Antennas can also be used for HERO testing of MIL-STD-464 System-level requirements. 

400 - 1000 MHz Gain @ 1m, 11.6-15.8 dBi 

1 - 1.6 GHz Gain @ 1m, 18.9 - 20.6 dBi 

1.5 - 2.6 GHz Gain @ 1m, 20.3 - 22 dBi 

Absolute EMC with strategic partners is offing Lens Antenna for meeting the high demanding levels required by DO-160 CAT K and MIL-STD-464. Testing for HiRF High Intens Radio Fields up to and exceeding 5000 V/m with commercially available TWT Pulsed or Solid-state amplifiers. Antennas can also be used for HERO testing of MIL-STD-464 System-level requirements. Lens Antennas focus the field to reach higher levels in the near-field. 

2 - 3.2 GHz Gain @ 1m, 20.0 - 20.9 dBi 

2.6 - 4 GHz Gain @ 1m, 20.2 - 22.8 dBi 

4 - 6 GHz Gain @ 1m, 21.1 - 23.6 dBi 

Absolute EMC with strategic partners is offing high gain HiRF Antennas for meeting the high demanding levels required by DO-160 CAT K and MIL-STD-464. Testing for HiRF High Intens Radio Fields up to and exceeding 5000 V/m with commercially available TWT Pulsed or Solid-state amplifiers. Antennas can also be used for HERO testing of MIL-STD-464 System-level requirements. 

6 - 8.2 GHz Gain @ 1m, 21.8 - 23.1 dBi 

8 - 12.4 GHz Gain @ 1m, 20.7 - 23.3 dBi 

12.4 - 18 GHz Gain @ 1m, 21.6 - 23.2 dBi 

Small biconical antenna 

20 - 220 MHz 

Used for ISO 11452-9 Annex C.5 

used with 419 NJ Flat Elements 

30 W 

Pyramidal standard gain horn Antenna optimized for far-field gain 

8 - 18 GHz 

20 dBi Gain 

The VUSLP 9111 F is a demountable log-periodic antenna 

75 - 4000 MHz 

1 kW 

Type N (female) 

Pneumatic polarisation shifter with a 2-way pneumatic cylinder for all Schwarzbeck antennas with a 22 mm tube on AM 9144. Compressed air required. 

The Antenna Hinge Joint is a device made of high-grade insulating material to change the polarisation of large preferably double-boom antennas such as LOG-PER models. 

Positioner for lightweight antennas like SBA 9113 with 420 NJ. The positioner consists of 1 piece of glass fiber tube 22 mm thick, 1000 mm long, an adapter AA 9203 is mounted to the tube. The other end of the tube carries a 3/8 inch male camera thread. 

Adapter for Schwarzbeck antennas with 22 mm tube on EMCO mast. 

Swivel handle for light antennas 

The USLP 9142 is a log-periodic antenna 

0.7 - 8 GHz 

50 W 

Type N (female) 

A non-metallic mast adapter for most lightweight Antenna models with 22 mm tube minimizes reflections 

3/8" camera thread 

polarisation continuously adjustable 

Adapter to convert a 3/8" female thread to 22 mm tube e.g. to fix BBHA 9170 on AM 9104. 

The broadband horn antenna BBHA 9120 E is a linear polarized double ridged horn antenna 

(0.8) 1 GHz to 6 GHz 

N - female 

The broadband horn antenna BBHA 9120 G is a linear polarized double ridged horn antenna 

0.4 GHz to 2.8 GHz 

7/16 - female 

Antenna adapter to fix STLP 9128 E, STLP 9128 E special, STLP 9128 D, STLP 9128 D special on AM 9144. 

Allows antenna rotation without height adjustment. 

The antenna can be fixed in the center of gravity without any collision 

Adapters with the AM 9144 during polarisation change. 

The BBHA 9120 K is a linear polarized high gain horn antenna for immunity testing at short distances, specially optimized for Automotive 600 V/m Pulse Radar Test 

1.2 - 1.4 GHz 

Generates 600 V/m with < 250 W 

The broadband horn antenna BBHA 9120 LF is a linear polarized double ridged horn antenna. 

0.7 GHz to 6 GHz 

N - female 

Symmetrically folded antennas, Helical antennas, Tuned sleeve antennas 

Axis aligned as a straight extension of the coaxial feed cable 

According to ISO 11452-9, Handy Trasmiter requirements 

20 Watts 

Type N & BNC 

Linear polarized stacked Logarithmic Periodic Broadband Antenna with aluminium tubing for immunity testing with extremely high power. 

Detachable Antenna Mast System (glass-fiber tubing) for VHF-UHF Antennas manual height scanning 0.4 m to 4 m insulated mast and antenna box with 0°/90° detents zinc-plated / stainless steel 3-leg mast foot 

Mast Adapter for AM 9144 with 22 mm hole for most Antenna models 

3/8" and 1/4" camera threads polarisation and 

elevation continuously adjustable 

The USLP 9143 is a log-periodic antenna 

0.25 - 8 GHz 

50 W 

Type N (female) 

AA 9205 Mast Adapter for Antenna Mast System AM 9144 

The VUSLP 9111 E is a polarized log-periodic antenna 

65 - 4000 MHz 

1 kW 

Type N (female) 

TA 9204 Thread Adapter with 3/8" female and 1/4" male threads. Mainly for American antenna brands. 

TA 9205 Thread Adapter with 1/4" female and 3/8" male threads. (For camera tripods, not for AM 9144) 

TA 9206 Thread Adapter with 3/8" female and 5/8" male threads. (Geodesy) 

The UHALP 9108 A is a polarized log-periodic antenna 

250 - 2400 MHz 

1 kW 

Type N (female) 

The VULP 9118 A is a polarized log-periodic antenna 

180 - 1500 (2000) MHz 

1 kW 

Type N (female) 

The VULP 9118 B is a polarized log-periodic antenna 

160 - 1500 (2000) MHz 

1 kW 

Type N (female) 

The VULP 9118 C is a polarized log-periodic antenna 

100 - 1400 (2000) MHz 

1 kW 

Type N (female) 

The VULP 9118 D is a polarized log-periodic antenna 

(85) 95 - 1500 (1800) MHz 

1 kW 

Type N (female) 

The VULP 9118 E is a polarized log-periodic antenna 

(50) 75 - 1500 MHz 

1 kW [w/ 7-16 High power 5.4 kW ( 

Type N (female) or 7-16 DIN (f) 

The VULP 9118 F is a polarized log-periodic antenna 

55 - 1800 MHz 

1 kW 

Type N (female) 

The VULP 9118 G is a polarized log-periodic antenna 

45 - 1500 MHz 

1 kW 

Type N (female) 

The VULP 9118 H is a polarized log-periodic antenna 

(26) 30 - 1500 (1800) MHz 

1 kW 

Type N (female) 

The VUSLP 9111 is a polarized log-periodic antenna 

200 - 4000 MHz 

1 kW 

Type N (female) 

The VUSLP 9111 B is a polarized log-periodic antenna 

180 - 4000 MHz 

1 kW 

Type N (female) 

The USLP 9143 B is a log-periodic antenna 

180 MHz - 8 GHz 

200 W 

Type N (female) 

The ESLP 9145 is a log-periodic antenna 

700 MHz - 20 GHz 

20 W 

Type N (female) 

The VUSLP 9111-1000 is a polarized log-periodic antenna 

750 - 4000 MHz 

300 W 

Type N (female) 

The VUSLP 9111-400 is a polarized log-periodic antenna 

370 - 4000 MHz 

300 W 

Type N (female) 

XSLP 9142 Dual Polarized UHF-SHF Log.-Per. Antenna 

800 - 5000 MHz 

50 W 

Type N (female) 

XSLP 9143 Dual Polarized UHF-SHF Log.-Per. Antenna 

250 - 5000 MHz 

50 W 

Type N (female) 

Small biconical microwave antenna 

0.5 - 3 GHz 

Compliant with CISPR 16-1-4 for site validation above 1 GHz 

Including transport case 

20 W 

Small biconical microwave antenna elements 

370 MHz - 2.7 GHz 

Compliant with FMC1278 

Purchase with SBA 9113 or mini version 

20 W

Small biconical microwave antenna elements 

800 MHz - 6 GHz 

Compliant with FMC1278 

Purchase with SBA 9119 

20 W 

Tuned sleeve antennas are tuned half-wave dipoles, 

Axis aligned as a straight extension of the coaxial feed cable 

VHF/UHF range according to ISO 11542-9 

20 Watts 

Type N 

Tuned sleeve antennas are tuned half-wave dipoles, 

Axis aligned as a straight extension of the coaxial feed cable 

according to Nissan 28401NDS02 [6] and Renault 36-00-808/M 

20 Watts 

Type N & BNC 

Tuned sleeve antennas are tuned half-wave dipoles, 

Axis aligned as a straight extension of the coaxial feed cable 

According to Volkswagen standard TL 82166:2009-05 

20 Watts 

Type N & BNC 

The antennas are monopole antenna 

In a PVC-housing 

For automotive immunity testing on component level. 

Proposed in the standard ISO 11452-9 

The broadband horn antenna BBHA 9120 E is a linear polarized double ridged horn antenna 

(0.8) 1 GHz to 6 GHz 

N - female 

Small biconical microwave antenna elements 

20 - 220 MHz 

Compliant with FMC1278 + Others 

Purchase with NMHC 4 MM 

30 W 

Handheld Direction Finder 

30-300 MHz 

diam. 300 mm 

Both horizontal and vertical polarizations 

BNC Connector

Handheld Direction Finder 

9 kHz - 30 MHz 

diam. 300 mm 

Both horizontal and vertical polarizations 

BNC Connector 

Handheld Direction Finder (TBD) 

200-500 MHz 

diam. ? 

Both horizontal and vertical polarizations 

BNC Connector 

Helical antenna 

750 - 1050 MHz 

left-hand circular polarization (LHCP) 

gain: 11 dBic 

22 mm tube 

Helical antenna 

750 - 1050 MHz 

Right-hand circular polarization (RHCP) 

gain: 11 dBic 

22 mm tube 

Conical Logarithmic Spiral Antenna 

The CLSA 0110 offers circular polarisation over approx. one decade up to microwave frequencies. 

Frequency Range: 1 - 10 GHz 

Polarization: either LHCP or RHCP (Left or right hand circular polarisation) 

The RSH 113 is a crossed dipole antenna, consisting of two shortened half-wave-dipoles. The size reduction is achieved by the use of top-loading discs. The design frequency range is from 108 to 118 MHz, typical applications are measurements at instrument landing systems (ILS-Localizer). The RSH 113 has a nearly omnidirectional pattern and comes with horizontal polarisation. The antenna can be used for both, Receive and Transmit Applications and comes with a nominal impedance of 50 ?. 

The RRAH 9286 is an antenna holder for antennas with a 22 mm tube for vertical mounting on a car roof rack. The antenna holder is suitable for all standard roof rack carriers with a max. the cross-tube dimension of 44x30 mm. The mounting distance is adjustable from 82-92 cm at 2.5 cm intervals (center-center). 

Horizontal polarised omnidirectional Antenna for mobile and stationary receive and transmit applications. 

A typical application is the DVB coverage measurement using measurement vehicles. 

Frequency range: 350 - 1050 MHz 

Horizontal polarised omnidirectional Antenna for mobile and stationary receive and transmit applications. 

A typical application is the DVB-T (DTMB,ATSC or ISDB-T) coverage measurement using measurement vehicles. 

Frequency range: 170 - 350 MHz 

Vertical polarized VHF- UHF biconical antenna 

(170) 230 - 1000 (1100) MHz 

With omnidirectional H-plane pattern 

Vertical polarized VHF- UHF biconical antenna 

(330) 450 - 1000 (1100) MHz 

with omnidirectional H-plane pattern 

Vertical polarized microwave biconical antenna 

(0,5) 1 - 6 (8,5) GHz 

with omnidirectional H-plane pattern 

Vertically polarised symmetrical biconical antenna 

0.4 - 6 GHz 

omnidirectional in the H-plane 

9 kHz - 300 MHz 

12 µV/m - 65 V/m 

const. antenna factor typ. 46 dB/m high symmetry 

built-in rechargeable battery 

The switchable preamplifier improves the antenna factor to 20 dB/m. 

CalStan 11 is a software tool for automation of radio frequency (RF) calibrations and measurements of EMC test sites and test equipment. The software controls the instruments via GPIB bus and LAN, reads the measurement values and computes the results. A modular concept with measurement plug-ins allows customization according to the test lab requirements.