-
Our High Intensity Linear Backlights offer 510 kLux output, perfect for back-lit, line-scanning applications.
-
Available in pre-engineered sizes from 6” (152mm) to 96” (2438mm) in 6″ increments.
-
A 3″ (75mm) length option is also available. Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input
Advanced Illumination - DCS-MP Manual Dimming Accessory
- Detented, 30 position potentiometer for repeatable dimming with cable inline controllers
- Built in DIN-rail or panel mounting feature
- Flip up cover for potentiometer to prevent accidental adjustments
- Spring clamp wiring terminal for vibration proof installation
- NEW M12 selector switch for use with iCS 2 (IC) and iCS 3 (I3) M12-based lights
General Specs
Length |
89.7mm (3.53in) |
---|---|
Width |
35.6mm (1.40in) |
Height |
60.7mm (2.39in) |
Weight |
185g |
Operating Temperature |
-25°C to 57°C |
Compliance |
CE, RoHS |
*Values shown are based on controller component limitations. Actual limitations will vary depending on the limits set for the connected light head. These limits are determined using Advanced Illumination's proprietary SignaTechTM (Signature Technology) in order to ensure safe peak performance.
** Various light head configurations available, including 1 x 4-channel quadrant (Q1) control or multiple single light heads (Q4) per block.
Mechanical Specs
Electrical Specs
Part Number Key
More Product Information

- High dispersion for reflective surfaces and shorter working distances.
- Provides a wider and more intense illumination area than the AL126.
- IP65 compliant washdown option is available, as are a wide spectrum of wavelengths.
- Available with polarization and diffusion light conditioning.
- This expandable compact bar light is pre-engineered for custom lengths in 2″ increments up to 20″.

- Network Enabled Distribution Amplifier
- Low Phase Noise Reference Frequency Outputs
- Fault Alarm Output
- 1U 19″ Rack Mount
- Frequency Synthesizer Option
- Hitless Switching of Reference
- Programmable Amplitude
- Propagation Delay Compensation
- 10 MHz Standard, Other Frequencies Available

The LN112-30 Lens Adaptor is used for creating a 30° focused beam spread when attached to a SL112 or SL162.

- The fourth generation of Ai’s popular Inline Control System.
- High Output Power: Capable of delivering 2.1 amps of continuous output and up to 8 amps in overdrive strobe at 24V, outperforming all other inline controllers on the market.
- Compact & Rugged: Sleek enough to fit through wiring conduit with its compact anodized aluminum housing and sealed to IP68 standards for prolonged liquid immersion and complete dust protection.
- Plug-and-Play Functionality: Enabled with SignaTech™, allowing for simplicity when overdriving, without risk of damage to the lighthead. For more information, please refer to the Product Manual

- IRIG’s A and B and NASA 36 time code inputs
- +3.3V or +5V signaling
- 1PPS Sync input
- External Event (Time Tag) input
- Three programmable pulse rate outputs
- Match Time output
- Industrial Temperature Range option
- Optional on-board GPS option
- Optional HaveQuick input/output
- Optional IRIG B time code output


- The SL164 is characterized as a Compact High Intensity Spot Light with sufficient thermal management to provide 200kLux at a working distance of 4” (100mm).
- A very wide range of wavelengths are available from UV to IR.
- Multiple beam spreads are also available as is a diffuser option.

-
Continues the Infinity family’s Industry leading electrical performance
-
High temperature capability (175° C +) for automotive device characterization and other applications
-
Better tip visibility for enhanced placement accuracy and repeatability
-
Improved tip life/durability with solid rhodium contacts
-
New tip architecture enables support for narrower pitches (e.g. 25um)
-
Advanced mechanical design combined with small contacts enables probing on smaller pads/pitches and improves durability and robustness

- The SL162 is characterized as a High Intensity Spot/Coaxial Light and is designed primarily to replace fiber optic light sources in coaxial lensing applications.
- Optional couplers are available for use with Dolan-Jenner, Fostec, and Moritex fiber bundles.
- The spot light is designed with sufficient thermal management to provide 33kLux at a working distance of 4” (100mm).
- A very wide range of wavelengths from UV to IR are available.

Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636