-
To simplify the mounting process, Ai offers a line of camera brackets for positioning lights under or around the camera lens.
-
Most brackets are designed to be held in place by the same screw that secures the camera.
Advanced Illumination - Mounting Brackets
General Specs
Compatibility Matrix
Part No Key
More Product Information
- S-parameters DC to 40 GHz, single-ended and mixed-mode
- Impedance Profile with <1 mm resolution, differential and common-mode
- Internal, automatic OSLT calibration
- USB-connected, small, lightweight
- Flexible display of the measurements
- Remove effects from fixtures, connectors and cables
- Emulate eye diagrams with CTLE, DFE and FFE equalization
- Advanced jitter analysis
-
The BL128 Series of Compact Backlights provide edge to edge illumination in a 12mm thick housing.
-
The BL128 length is expandable in 1” (25mm) increments up to 14.4″ (366.8mm).
-
Optional washdown version is IP65 compliant.
-
Pre-Engineered Scalability Enables Customized Emitting Lengths in 2″ Increments to 20″
-
Intense, Diffuse Lighting with 226 kLux at Emitting Surface
-
Multiple Available Wavelengths, Including Visible Monochromatics, Infrared, and White
-
Available Washdown Option for Difficult Environments
-
Can be Applied in Backlighting or Diffuse Front Lighting Geometries
-
Type APS-H CMOS sensor
-
IEEE 1588 PTP
-
Power over Ethernet
-
4.59 fps at full resolution
-
Monochrome (GT5120) model
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Planarity adjusted (PA) EF Lens Mount (option -18) for electronic control of aperture and autofocus
-
Easy camera mounting via standard M3 threads at all sides and 1/4-20 tripod mounting hole
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Enhanced Defect Pixel Correction feature with a new Defective Pixel List Manager tool that allows you to load different user defined defective pixel lists to match your application and optimize the life cycle of the camera
-
AR0522 CMOS sensor
-
ALVIUM image processing
-
USB3 Vision
-
Various hardware options
-
Monochrome (1800 U-501m NIR) model
-
ALVIUM® Technology for on-board image processing
-
USB3 Vision interface for GenICam SFNC features
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Micro-B USB 3.1 Gen 1 connector with screw locks for industrial applications
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for both embedded and machine vision applications
-
The I3 and I3S Inline Controllers provide overdrive strobe and continuous operation to lights from a small package when larger, more versatile external controllers are not necessary.
-
Switching between continuous-on, gating on/off and strobe overdrive is seamless. The I3 and I3S employ Ai’s exclusive Adaptive OverdriveTM that optimizes strobe power regardless of input Pulse Width.
-
The I3 is a default-on device on power-up, whereas the I3S is a default-off device, requiring a trigger to illuminate.
-
All ICS models employ reverse input polarity protection.
-
Provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming. 30 uSec response time.
-
A wash down version of all ICS drivers is provided automatically with any wash down light to which it is attached.
-
0 – 100% Intensity Control with optional DCS-MP, purchased separately, will provide manual intensity control via an external potentiometer.
-
IRIG A & B/IEEE-1344, and NASA 36 inputs standard
-
HaveQuick sync option
-
Propagation delay compensation
-
Zero latency time reads
-
Match Time output (P4)
-
IRIG B time code output option
-
External Event time tag (P4)
-
Three user programmable rates
-
Ruggedization option
-
Multi-pin Front Panel P4 I/O option
-
Eliminating all but a narrow band of light (+/- 40nm) centered on the specified wavelength, band pass filters are used to enhance colors, or to stop unwanted ambient light from reaching the camera.
-
Filtering can replace existing shrouds, simplifying the physical set up of an inspection site.
-
Ai offers 660nm and 635nm band pass filters to fit a number of different lens sizes.
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636