• The Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
• PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
• Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
• Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
• High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
• Single Step and Fast playback mode of test results.

• Guaranteed performance to 43.5 GHz with Extended K™ ports
• High output power allows measurement of high attenuation devices
• Wide dynamic range enables measurement of very low reflection artifacts
• Excellent corrected directivity minimizes measurement uncertainty
• SmartCal™ auto calibration unit reduces calibration and setup time
• Time domain with time gating option grants easier and faster fault identification
• Modern LAN interface for remote control is faster than GPIB
• A common GUI and SCPI interface within the ShockLine family
• Bias tee option simplifies test setups where the DUT needs DC biasing
• Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction
• E-Band VNA
  • Extended frequency range covering E-band and major parts of V band
  • Fully assembled test system eliminates setup errors and increases reliability
  • Tethered modules connect directly to the DUT increasing measurement stability

Comprehensive, Turn-key Integrated Measurement System (IMS) with Keysight A-LFNA for On-wafer R&D Advanced Low-Frequency Noise Measurements

• With an intensity of over 150 klx at 300 mm WD in continuous operation, the SL316 UltraSeal Spot Light delivers industry-leading intensity with consistent uniformity. 
• Available with narrow, medium, and wide lensing options as well as a non-lensed configuration for high dispersion. 
• Configurable in eleven wavelength options. 
• Compatible with all Ai inline and discreet control systems. The SL316 can be operated in continuous, gated continuous, pulsed, and adaptive pulsed modes with dimming options for brightness control.

• Pre-Engineered Scalability Enables Customized Emitting Lengths in 2″ Increments to 20″
• Intense, Diffuse Lighting with 226 kLux at Emitting Surface
• Multiple Available Wavelengths, Including Visible Monochromatics, Infrared, and White
• Available Washdown Option for Difficult Environments
• Can be Applied in Backlighting or Diffuse Front Lighting Geometries

• IRIG A & B/IEEE-1344, and NASA 36 inputs standard 
• HaveQuick sync option 
• Propagation delay compensation 
• Zero latency time reads 
• Match Time output (P4) 
• IRIG B time code output option 
• External Event time tag (P4) 
• Three user programmable rates 
• Ruggedization option 
• Multi-pin Front Panel P4 I/O option

ProPhotonix offers a versatile range of LED Area Lights designed to deliver exceptional performance across diverse applications. The SpecBright™ LED Area Lights standout for their unparalleled uniformity and impressive brightness, achieved through advanced Chip-on-Board LED technology. The UVC-Pro Area Light provides a groundbreaking solution with its stackable 265nm light, ideal for machine vision, fluorescence detection, and disinfection.

Our area lights are engineered for high-intensity illumination and superior uniformity, ensuring consistent and reliable results even in the most demanding environments.

• 2 independent, isolated 600W channels or 1 1200W channel in 1U 
• Voltage: 40 V to 220 V 
• Current: 2.72A to 20A 
• 2μ second shunt switching recovery 
• Peak Power Tracking 
• Primary and secondary over voltage and over current 
• Output electronic circuit breaker 
• Built in fault data recorder 
• Power On Self-Test 
• Active power factor correction (PFC) 
• Color touch panel monitoring 
• Standard LAN interface 
• Full remote control via AMETEK SAS software or SCPI commands

Customers can leverage our multi-tier approach to customization to reduce engineering costs.

• Our adaptable Build-to-Order (BTO) system provides for very short lead times and allows a product to be configured from a large set of predetermined parameters, with hundreds of thousands of BTO combinations available. BTO products are indicated in the product data-sheet and are shipped within 1-3 weeks, depending on the product. 
• Our Semi-Custom products require some additional design and documentation effort but can be a smart choice when more flexibility is required. 
• Lastly, a full Custom product can be developed when your budget and time frame allows. This option supplies you with a fully custom-designed and built lighting solution that will be engineered to fit your exact machine vision needs.