Amplifier Research - "U" Series Amplifiers
The “U” Series customizable, Class A design is ideal for laboratory and EMC testing, as well as testing antennas, components, piezoelectric devices, wireless chargers, and more. The “U” Series offers performance and durability with the power and frequency for universal applications. In addition to the models listed below, custom versions are also available.
10 kHz to 1000 MHz. 500 W
Model Number |
Description |
---|---|
100 W CW, 10 kHz – 1000 MHz |
|
10 W CW, 10 kHz – 1000 MHz |
|
150 W CW, 10 kHz – 1000 MHz |
|
1 W CW, 10 kHz – 1000 MHz (no remote interface) |
|
2.5 W CW, 10 kHz – 1000 MHz (no remote interface) |
|
250 W CW, 10 kHz – 1000 MHz |
|
25 W CW, 10 kHz – 1000 MHz |
|
50 W CW, 10 kHz – 1000 MHz |
|
5 W CW, 10 kHz – 1000 MHz (no remote interface) |
More Product Information
-
Double Conversion, Online, Global Input, Extreme High Temperature UPS for Industrial Applications
-
Three independent, isolated 1,700W channels, 5,100W total
-
1U rack-mount chassis
-
Eight output options
-
Multi-language, intuitive, color touch panel control
-
Global 3-Phase AC Input options for system phase balancing
-
Active power factor correction (PFC)
-
Multi-channel programmable sequencing, ramps, and delays
-
Full remote control via Virtual Panels™ GUI
-
Standard LXI Ethernet, USB and RS232 control interfaces
-
Optional GPIB control interface or isolated analog programming
-
Applications
-
Upper-side gate drive signal measurements
-
Floating control signal or sensor voltage measurements
-
EMC, EFT, ESD, and RF immunity testing and system optimization
-
Any small signal measurements with high common-mode voltage
-
60 MHz bandwidth
-
35 kV common-mode voltage rating (fiber optic isolation)
-
Superior Noise and Rejection
-
140 dB CMRR
-
Low loop inductance
-
Low attenuation
-
-
Reduced DUT loading, better pulse response compared to conventional HV differential probes
-
Selectable tips from ±1V to ±40V
-
Eliminates need to “float” the oscilloscope
-
ProBus-compatible with many Teledyne LeCroy oscilloscopes
-
Ultra-high resolution (10 μm sampling) reflectometer with “zero dead zone”.
-
Measure RL, IL, distributed loss, length, polarization states, phase derivative and group delay
-
80 dB dynamic range
-
Backscatter-level sensitivity (-130 dB)
-
High Power AC Source
-
Programmable AC power for frequency conversion and product test applications
-
-
Expandable Power Levels
-
Available output power of 30, 45, 75 and 90 kVA per unit and multi-unit configurations for power requirements up to 180 kVA and above
-
-
Remote Control
-
Standard RS232, USB and IEEE-488 (GPIB) and optional LAN interfaces are available for automated test applications.
-
-
500 Watts, 12 VDC Input and Output, 9 Toggle Switched Circuit Breakers, 4 Position Input Terminal Block Strip, and 6 and 10 Position Output Terminal Block Strips
-
Ruggedized sensor package, qualified to same rigorous standards applied to electronic gages
-
Integrated temperature compensation FBG sensor
-
Connector protection fittings available for harsh environments
-
Double-ended design supports multiplexing of many sensors on one fiber
-
Two standard gage lengths of 25 and 100 cm
-
P67 rated for protection from dust and water ingress
-
3KVA, 3KW Double Conversion On Line Isolated 115VAC Input UPS, and simultaneous 120 and 240VAC 60Hz Output, Power Factor Correction, Extended Internal Batteries, SNMP Communications for Military Applications
Amplifier Research
Founded in 1969, Amplifier Research is a world-class source for broadband high power, solid state, RF amplifiers and microwave amplifiers, TWT amplifiers, log periodic antennas and high-gain horn antennas, plus EMC test equipment, software and field probes and monitors. Throughout its 50 years (and counting), AR has been responsible for a number of “firsts” which have transformed not only EMC and RF testing but also the industries and equipment affected by these tests. A sampling of these innovations includes:
- 10,000-watt tube amplifiers,100-watt solid-state • 100-1000 MHz instantaneous bandwidth Class A amplifier
- First production 16,000-watt solid-state linear amplifier from 10 kHz to 225 MHz
- 50,000-watt Class A power amplifier up to 225 MHz
- 0.7 to 6 GHz high-power Class A & AB amplifier
Additionally, they push the limits of state-of-the-art design and have ruggedized their products to make them virtually indestructible. AR amplifiers are fully tested to the extreme to ensure customers receive a product that is built to last.
Contact Details
Amplifier Research Corporation, Ametek CTS
160 Schoolhouse Rd., Souderton, PA 18964-9990, USA
Phone: 215-723-8181
Customer Service: 215-723-0275