The FX2 is the edge-lit flat diffuse light built for reflective surface inspection.

Unlike back-lit diffuse designs, the FX2 positions its LEDs in the frame rather than behind the emitting window. This side-lit geometry allows for a thin housing and a scalable planar design with uniform output at longer working distances.

The FX2 is available in sizes from 50 mm x 50 mm up to 600 mm x 600 mm in 25 mm increments. It is offered in 11 wavelengths, with optional polarization to help reduce glare on reflective surfaces, and can be specified with a central viewport for select front lighting applications.

• Enables easier lens access
• Extension of standard enclosure length
• For Salamander and Orca enclosures
• Front or backside assembly possible
• 30mm or 60mm length
• IP protection class is conserved

• IEC 61000-4-4 Ed.3 standard compliance. 
• Pre-check function is installed. Inspection before testing is now easy. 
• Normal mode test support. Taking account of field troubles is possible. (option) 
• Utilize an outlet box that simplifies EUT connection. (option) 
• Compared with conventional products, the size has become compact. (Approximately 67% by volume) 
• Easy to understand Panel display reduces mistakes in connecting power cables. 
• Software control with Windows. (option) 
• Next calibration date can be notified. (Windows software only) 
• Employ LCD screen with multi-language support and enhanced operability. 
• Maximum output voltage of 5 kV and maximum pulse frequency of 2 MHz allow you to test above the standard test level. 
• CDN capacity is increased to single phase type AC 240 V 20 A, single and three phase type to AC 600 V 63 A, supporting wider range of EUT. 
• Large capacity CDN (100 A or 150 A) option available for Injection test on various EUT. 
• Using coupling clamps, EMS probe kits, you can test the signal lines and evaluate the noise immunity on the PCB. (option)

• For Flir Ax5 (new and old version)
• For cameras with special shape e.g. Tamron MP1010M
• Compact size
• Small dead weight
• High IP protection class
• Flexible camera positioning
• High chemical resistance
• Vibration‐proof mounting
• Camera mount included
• Good heat dissipation

• Wide Input Bandwidth 
• Input Isolation 
• Automatic & Manual Changeover 
• Transformer Coupled Outputs 
• Twenty four Outputs 
• Front Panel Status Indicators 
• Fault Discrete Inputs 
• Compact 1U, 19” rack mount

• Single-slot 32 bit PCI Express module 
• IRIG A, B, NASA 36, 1 PPS sync inputs 
• GPS sync option (maintains single-slot) 
• HaveQuick sync input option 
• Propagation delay correction 
• Zero latency time reads 
• Match Time output 
• IRIG-B time code output (option) 
• External Event time tags 
• Three user programmable rates 
• Supports Windows 8 & 10 
• Digitally Signed WHQL Driver

• High Current - 300 mA Sink 
• High Density - 64 Channels / Card 
• Isolation - 1000 V 
• Multiple Digital Logic Levels - LV TTL - TTL - 60 V Max, User Defined 
• Flexible Configurations - Dedicated Input - Dedicated Output - Eight, 8-Bit Ports 
• Flexible Software - Embedded Soft Front Panel - Common IVI Software Drivers

• For cameras up to 40 x 40mm cross section
• Robust construction
• Compact size
• High IP protection class
• Flexible camera positioning
• High chemical resistance
• Vibration‐proof mounting
• Camera mount included
• Excellent heat dissipation
• Special version for Tamron MP3010

• Hygienic PLUS IP69k protective enclosure
• For cylindric lasers with Ø19 – 20mm diameter
• Laser mount with good heat dissipation
• Easy window exchange thanks to snap ring mount
• Easy focus adjustment after front lid removal
• All Laser can be mounted close behind the window
• The Piranha enclosure will be shipped with standard V4A cable gland with 16mm bore, as usually the rear end will be mounted inside a hygienic T‐ Piece
• For other mounting variations the Piranha is also available with hygienic cable gland