Southwest Microwave’s high performance End Launch Connectors are designed to provide low VSWR, mode-free wide responses up to 125 GHz for single and multilayer microstrip or grounded coplanar printed circuit boards. Available in SMA (27 GHz), 2.92 mm (40 GHz), 2.40 mm (50 GHz), 1.85 mm (67 GHz) and 1.0 mm (125 GHz).

Male and female options along with narrow body and bulkhead feed-through. Unique clamping mechanism accommodates board thickness up to .300” (7.62 mm). Robust, reusable and repairable. Multiple launch configurations provide the best possible match to circuit layout. Works on microstrip and grounded coplanar waveguide (GCPW) designs. Signal-layer microstrip and GCPW test boards available. Soldering is optional.

Design and Test Assistance:

• Printed circuit board connector launch designs and connector part number recommendations for stack-ups
• 3D models for mechanical layout
• Connector Encrypted HFSS models (version 18.0 or newer) for EM simulations

Safran Ground Station is a turnkey ground segment solution with all required equipment and ground tools to proceed with removable media preparation and post-mission data retrieval and replay.

Key components are: 

• Rugged Heavy duty Laptop PC for military environment 
• RMM (Removable Memory Module) Docking Stations capable of reading up to 4 cartridges simultaneously, especially useful for mass debriefing. 
• Ground software suite (RMM Manager, eZ Viewer, MUST), very intuitive and user-friendly interface, for replay and exploitation of data while allowing customizable configuration of the display for mission debriefing. 
• Ruggedized Trolley Suitcase specifically adapted for the transport of the whole Ground Station.

This ground station, tested and approved by Safran before delivery, helps to accelerate the deployment on every integration Labs, Air Bases, and can be safely transported between different locations and environments

Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 1kOhm), the input impedance of these probes remains nearly constant over their entire frequency range. A traditional /10 passive probe will have a 10 MOhm) input impedance at DC, however this impedance drops rapidly with frequency, passing below the input impedance of a transmission line probe at less than 100 MHz.

• Specified performance to 43.5 GHz with Extended K™ ports
• Simple signal integrity testing of passive multiport and differential devices
• Advanced time domain option provides tools for signal integrity analysis
• Wide dynamic range enables measurement of very low reflection artifacts
• Excellent corrected directivity minimizes measurement uncertainty
• SmartCal™ auto calibration unit reduces calibration and setup time
• Time domain with time gating option enables TDR-like measurements
• Modern LAN interface for remote control is faster than GPIB
• A common GUI and SCPI interface within the ShockLine family
• The compact 3U high chassis allows for the efficient use of rack space
• Bias tee option simplifies test setups where the DUT needs DC biasing
• Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction

Simulator to reproduce various transient surge phenomena which are generated in a vehicle and required in the international standard ISO-7637-2 (2004) Standard, and evaluate the immune resistibility of the equipped electronics devices against the surge. 

• ISO 7637-2 (2004) Standard compliant simulator 
• Correspondent to the test for 12V/24V/42V systems in a vehicle 
• Stand-alone usage per the each generator unit possible as well as the comprehensive control 
• Large capacity CDN (60V/50A) available (Option) 
• Up to 200A power supply possible (Option) 
• Windows in Japanese applicable for the software program as well

_{Private standards or specifications by manufactures can be responded upon request.}

The SMX-6xxx product family includes the SMX-6101 (pictured), SMX-6103, SMX-6106, SMX-6111, SMX-6115, SMX-6116, and SMX-6144.