You design the future. We help you make it happen.
Dualos - Caps - NEO 901F Series
NEO 901 3000 PSI Adapters
|
Low Pressure Caps Part Number |
Port Size |
Thread End |
|
NEO 901F-P-04 |
4 |
0.4375-20 UNJF Class 3B |
|
NEO 901F-P-06 |
6 |
0.5625-18 UNJF Class 3B |
| NEO 901F-P-08 |
8 |
0.7500-16 UNJF Class 3B |
|
NEO 901F-P-10 |
10 |
0.8750-14 UNJF Class 3B |
| NEO 901F-P-12 |
12 |
1.0625-12 UNJ Class 3B |
|
NEO 901F-P-16 |
16 |
1.3125-12 UNJ Class 3B |
|
NEO 901F-P-20 |
20 |
1.6250-12 UNJ Class 3B |
*Approximate Dimensions [inches]
Document
More Product Information
- 600 MHz of instantaneous bandwidth per channel
- Timing synchronization up to 16 channels
- Link Emulation including:
- Phase continuous delay, Doppler, and attenuation changes
- AWGN and Eb/No
- 12 tap (path) multipath fading with Rayleigh, Rician & CW. Angle of Arrival (AOA), k-factor, and correlation controls
- RF frequency agile up/down converters
- Payload Emulation including:
- IMUX/OMUX amplitude and group delay distortion
- Amplifier Compression (AM/AM and AM/PM)
- Phase Noise
- Static and dynamic link emulation
- Ephemeris data generation using SATGEN
- Remote instrument control through ACEClient application
- Tri-Band S/X/KA: The best ratio of miniaturization/performance in any configuration
- AutoTrack S-Band: Supports any kind of operation
- Simultaneous Dual-Pol: For S, X and Ka-Band
- Earth Observation/Satellite Constellations: Meet your requirements
- Radome Covered: Maximum sustainability for any environment
- On-Off power switch
- 20 A Circuit Breaker
- 8’ Flexible Power Cord
- Outlets – (4) 5-20R
Test Tap:
- 3ft.
- (2) fork terminals (current)
- (1) fork terminals (ground)
- (2) Shielded Banana (voltage)
-
On-Off power switch
-
15 A Circuit Breaker
-
Inlet - IEC C14 for use with any cordset
-
Outlets – (8) IEC C13
Test Tap:
-
3ft.
-
(2) fork terminals (current)
-
(1) fork terminals (ground)
-
(2) Shielded Banana (voltage)
- Up to 96 differential channels per full rack mainframe
- Constantly monitor input signals for fault conditions
- Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths
- Inputs can be masked, inverted, and combined to produce interrupts
- Can be used as a time stamp module and as a digital I/O
- Programmable debounce circuitry prevents erroneous readings
- 10 V and 100 V input ranges
- On-board memory stores events with IEEE 1588 timestamps
- Synchronize reading of input states with other scanned analog channels
- Object size / measuring range up to 130 mm (5.11“) (larger customizations are possible)
- Quick and very easy measurement
- Little training required (without a customer specified database an initial operating instruction takes only 15 min)
- Suitable software: VELOX (measuring software), ProCable3 (CAQ system)
- Various external CAQ software are connectable (CIQ-AESA, ADVARIS, QDA-ASI-DATAMYTE, QUASAR, etc.)
- No user influence on default optical focus as well as default optimized, intelligent and homogeneous lighting
- Shock and vibration resistant due to an optimized sensor arrangement and balanced weight distribution
- Quick and very precise measurements due to the robust construction and easy operation
- Measuring software enables various operator level settings (production, laboratory, administrator, service, etc.)
- Standardized individual components lead to supply security and therefore a short delivery period
- Easy connection with external devices
Dualos
Website
787 SMOT compliant caps and plugs for hydraulic, fuel or DI water lines. 3000 PSI & 5000 PSI fine and extra fine threaded aircraft to JIC adaptors
