FRIWO - FOX12-XM-USB Medical Power Supply 5V / 2200mA worldwide
-
High efficiency
-
Low no load power consumption 50mW
-
Meets DoE efficiency level VI
-
Meets CoC version 5 Tier 2 ready
-
Ultra-low leakage current ≤10μA
-
IEC 60601-1-2, 4th edition ready
-
Wide operating temperature range 0 - 45°C
-
Isolation 2x MOPP
-
Double housing safety: snapped & welded
-
Also available as version with fixed plugs: FOX12-FM-USB
Required Accessories
For the operation of this device you need a primary adapter. This can be found here: Primary adapters
Product information "FOX12-XM-USB"
IEC 60601-1 approved, ≤ 10μA leakage current, Protection class 2xMOPP, DOE 2016 ready, IP42 approved exchangeable plug system as additional accessories, Double Safety: Housing snapped & welded.
Additional information
- Input voltage: 100-240 V
- Input tolerance: ±10%
- Frequency: 50-60 Hz
- Input current: 300-150 mA
- leakage current: ≤10 µA
- Overload protection: Yes
- Over Voltage Protection: Yes
- Short Ciruit protection: Yes
- Working temperature: 0°C - 45°C
- Humidity: 10-95% V
-
Storage temperature
: -40-70°C - Operating Altitude: 3.000 m
- Means of Protection: Input Output 2xMOPP, Input - Ground 1xMOPP
- Protection Class: II
-
MTBF: 200.000h acc. Mil217F (based on calculations at
120Vac/60Hz & 230Vac/50Hz, ambient 25°C
and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h - AC Input: FRIWO interchangeable mains plug system: see Primary Adapters
- DC output: USB socket Typ A
- Gehäuse / Housing: FOX12-USB
- material: PC-ABS
- Output voltage tolerance: ± 5%
- Spec.0 cover sheet FW-Type: FW8000MUSB/05
- Dimension: 77,5x31,5x41
- Standard: IEC60601-1
- Approbations: Europe, USA, Australia, Japan
- Housing Flame Class: UL 94 V0
- IP Rotection rating: IP40
- Line Regulation: ±1
- Load Regulation: ±4
- Atmospheric pressure: 70-106
- Storage Humidity: 10-95%
- Hold up Zeit: >10ms(120V), >50ms (230V)
- Inrush current: <35
- Condcted and Radiated Emmisions: EN55022, EN55011, FCC15, Class B, EN60601-1-2, IEC60601-1-2 4th Edition
-
Immunity
: EN55024, EN60601-1-2, IEC60601-1-2 4th Edition - Harmonics: EN61000-3-2
- Flicker noise: EN61000-3-3
- ESD (contact/ air): EN61000-4-2
- Immunity against radiated field: EN61000-4-3
- ETF/ Burst: EN61000-4-4
- Surge: EN61000-4-5
- Immunity against conducted disturbances: EN61000-4-6
- Voltage dips: EN61000-4-11
- Immunity against magnetic field: EN61000-4-8
- Vibration: Standard: IEC 60068-2-6, Frequency range : 10 – 500 Hz, Cross- over-frequency : 58 – 62 Hz, Displacement amplitude : 0.2mm, Peak acceleration : 3 g, Number of cycles: 10 per axis
More Product Information
- Dual Voltage ranges that support over voltage testing on 480V based systems
- Instrument Setups for quickly re-establishing the known instrument state
- 500uS time resolution for Transients
- Virtual Panels control software included
- Non-Linear current waveform programming during Load mode
- Phase coordination among multiple units (LKM/LKS)
- Powerful set of analog controls for PHIL and Modulation tests
- Trigger In & Out to permit extensive coordination with external systems
- Extensive Onboard diagnostics
- Digital I/O, including RS232, USB, Ethernet (GPIB optional)
- Intuitive 5” color display for ease of navigation
- Auto-paralleling for maximum flexibility with multi-chassis configurations
- Separate terminal blocks for single-phase and three-phase AC outputs
Vimba is our future-proof platform-independent SDK for all Allied Vision cameras with GigE Vision, USB3 Vision, IEEE 1394, and Camera Link interface. With Vimba, you can acquire images and control your Allied Vision camera instantly, but also program complex vision applications or connect to third-party libraries.
Highlights
-
DOE 2016 Ready
-
High efficiency
-
Low standby power ≤ 0.1 Watts
-
Exchangeable primary lead for worldwide use
-
Double Safety: snapped & welded
- Three independent, isolated DC output power supply 600W channels
- Total DC power density up to 1800W in a 1U chassis
- 5 autoranging output channel options
- Intuitive color touch panel control
- Multi-language display for global operation
- Multi-channel programmable sequencing, ramps, and delays
- Active power factor correction (PFC)
- Standard LXI LAN, USB, and RS232 interfaces
- Optional GPIB interface
- Full remote control via Virtual Panels™
- S-parameters DC to 40 GHz, single-ended and mixed-mode
- Impedance Profile with <1 mm resolution, differential and common-mode
- Internal, automatic OSLT calibration
- USB-connected, small, lightweight
- Flexible display of the measurements
- Remove effects from fixtures, connectors and cables
- Emulate eye diagrams with CTLE, DFE and FFE equalization
- Advanced jitter analysis
- All-in-one microstage - no separate controller
- Direct high-level command interface (I2C or SPI)
- USB adapter enables direct connection to PC
- Small: < 32x32x11 mm including controller
- Absolute encoding: high repeatability, no homing
- Low power: 6 VDC, ~5 W (only when moving)
- For integration into battery powered devices
- Long stroke: 15 mm
- High force: 1 N (~100g load vertical, ~200g horizontal)
- High stiffness with crossed roller bearing design
A precise measurement tool for a wide range of signals, such as NTP, IRIG B, 1PPS, ASCII against an internal precision GPS-controlled oscillator.
-
Measures and displays the difference between input time signal and UTC
-
Capable of measuring a wide variety of time signal inputs
-
Timing resolution of better than 1 nanosecond
-
Absolute accuracy of up to 50 nanoseconds to UTC
-
Automatic identification and analysis of Modulated Carrier Timecodes
-
Full color touch-screen with user-friendly Windows-based operating system
-
USB port on front panel for easy access downloads for subsequent analysis of data
-
Robust, portable design for all industrial applications
-
Input available for measurement of relay opening/closing
-
User-selectable threshold for alarm generation
-
Robust, portable design for all industrial applications
- PowerFlex design provides higher currents at lower voltages enabling one model to meet many different voltage/current requirements.
- Compact design for bench use or rack mounting (1/2 or 1/4 rack width)
- True analog controls with digital settings locking (S-Lock)
- Mixed-mode regulation with linear final regulation for low noise
- Dual models have isolated voltage tracking and synchronous on/off.
- P models have RS-232, USB, and LXI-compliant LAN interfaces plus duplicate rear terminals. GPIB Optional.
See Specifications & Details tab for additional information
FRIWO
Based on 50 years of experience, FRIWO today has a global presence with modern development centres, production facilities and sales in Europe, Asia and North America. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices). At the end of the 2020 fiscal year, the company employed over 2,500 people worldwide and generated revenue of 99.4 million euros.
As an international system provider, FRIWO, headquartered in Ostbevern (DE), develops and produces digitally controllable power supply and drive solutions for futureoriented industries such as power tool technology, industrial applications, medical technology or electromobility.
The product portfolio includes technologically leading chargers, battery packs and power supply units as well as intelligent components for electric drive trains. The range of solutions extends from the display, motor control and drive unit to the control software.
Contact Details
FRIWO Gerätebau GmbH Headquarters
Von-Liebig-Straße 11, 48346 Ostbevern, Germany
Phone: +49-25-32-81-0
Fax: +49-25-32-81-112
Email: hello@friwo.com
Embedded
Download Line Card
Document
