You design the future. We help you make it happen.
Hyperlabs - Amplifiers
Ultra-broadband amplifiers from HYPERLABS are designed with cutting-edge applications and next-gen systems in mind.
|
Linear Amplifiers |
HL5897 Ultra-Broadband Linear Amplifier (48 kHz to 63 GHz) The HL5897 is an ultra-broadband linear amplifier and data driver with exceptional gain flatness from 48 kHz to 63 GHz, optimized to minimize eye distortion. Operating from a single 6 V supply, it is ideal as a linear gain block for fiber-optic receiver channels and 112 Gbps PAM4 signaling. |
|
HL5867 Broadband Linear Amplifier (35 kHz to 30 GHz) The HL5867 is an ultra-broadband linear amplifier with exceptional gain flatness from 24 kHz to 30 GHz, available in RF-optimized or data-optimized configurations with thermal compensation from 0° to +60°. The data driver option minimizes eye distortion, making it ideal for fiber-optic receiver channels and PAM4 signaling up to 32 Gbps. |
|
|
HL5887 Broadband Linear Amplifier (42 kHz to 40 GHz) The HL5887 is an ultra-broadband, thermally compensated linear amplifier with exceptional gain flatness from 42 kHz to 40 GHz and stable performance from 0° to +60°. Optimized as a data driver, it minimizes eye distortion and is ideal for fiber-optic receiver channels and PAM4 signaling up to 64 Gbps. |
|
|
Limiting Amplifiers |
HL5810 10 Vpp Limiting Amplifier (100 kHz to 15 GHz) The HL5810 is an ultra-broadband, thermally compensated limiting amplifier designed for broadband pulse amplification and NRZ data transmission up to 20 Gbps. In limiting mode, it delivers a fixed 10 Vpp output from 0.03-0.63 Vpp inputs, improving signal integrity by accelerating transitions and flattening topline aberrations. |
|
HL5877 Broadband Limiting Amplifier (35 kHz to 24 GHz) The HL5877 is an ultra-broadband, thermally compensated limiting amplifier with exceptional input sensitivity, amplifying very small signals while producing a controlled output amplitude. User-adjustable output amplitude and eye crossing point enables precise optimization of high-speed signal integrity. |
More Product Information
- Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
- Automatic probe detection
- Provides all necessary power and offset control to the attached probe
- Supports probes up to 4 GHz
- Easy firmware updates
- Wide variety of probes supported including: Preamplifiers, Current Probes, Single-Ended Active Probes and Differential Active Probes
Stable high current calibrator with 120 A AC/DC range, built-in multimeter, floating outputs and both real and simulated transconductance amplifier functions.
- High accuracy throughout all ranges
- 8 Vpk floating outputs
- Real and simulated transconductance amplifiers
- DC - 200 kHz bandwidth DC
- MHz (small signal -3 dB)
- Output voltage ±75 Vpk
- Rise / fall time 100 V/µs
- USB interface standard, LAN optional
- Analog control input 0 ... ±10 V for control of voltage and current
- Monitor outputs for measured voltage and current values (not all models)
- Modularly extensible via master-slave mode
- Parallel and Series Connections for two or more units
HYPERLABS offers the highest-performance Broadband DC Pick-off Tees on the market, with the industry’s lowest levels of insertion loss from DC to 110 GHz.
Not all amplifiers are created equal, so how can you be certain that an amplifier will work for your needs? You deserve to be confident that the amplifiers used with your test-and measurement lab benches will meet the requirements of your specific applications, are reliable, and are equally well-supported pre-and post-sale. When it comes to application expertise, reliability and support, there is no company that does it better than Maury.
Keep Your Eyes Wide Open™ with baluns, pick-off tees, bias tees, DC blocks, and other 100+ GHz components designed for 112 and 224 Gbps PAM4 systems. Our ultra-broadband devices preserve clean eye diagrams with minimal signal perturbation, helping your test system keep pace with rising data rates—all proudly designed and manufactured in the USA.
Not all amplifiers are created equal, so how can you be certain that an amplifier will work for your needs? You deserve to be confident that the amplifiers used with your test-and measurement lab benches will meet the requirements of your specific applications, are reliable, and are equally well-supported pre-and post-sale. When it comes to application expertise, reliability and support, there is no company that does it better than Maury.
Not all amplifiers are created equal, so how can you be certain that an amplifier will work for your needs? You deserve to be confident that the amplifiers used with your test-and measurement lab benches will meet the requirements of your specific applications, are reliable, and are equally well-supported pre-and post-sale. When it comes to application expertise, reliability and support, there is no company that does it better than Maury.
HYPERLABS ultra-broadband baluns provide precise 180° signal splitting and combining with excellent amplitude and phase balance across industry-leading bandwidths up to 145 GHz. Ideal for PAM4, optical communications, and high-speed test environments.
Hyperlabs, Inc.
Website
Founded in 1992, HYPERLABS is a leading designer and manufacturer of 145+ GHz Ultra-Broadband Baluns, DC Blocks, Pick-Off Tees, Bias Tees, and other high-performance components.
We also build TDR and Signal Integrity instruments used in the test and measurement industry. Our product line includes high-speed and electrostatic-protected instruments, all in low-power, portable form factors that can be controlled from any Windows PC.
