You design the future. We help you make it happen.
HYPERLABS - Frequency Dividers
The HL590x series is a wideband frequency divider with minimal additive phase noise. It supports division ratios of 2, 4, 8, depending on the model, from 100 MHz to 24 GHz.
|
Frequency Dividers |
HL5902 Frequency Divider (100 MHz to 24 GHz) The HL5902 Series is a wideband frequency divider with minimal additive phase noise, supporting divide ratios of 2, 4, and 8 from 100 MHz to 24 GHz. It delivers buffered outputs from 12.5 MHz to 12 GHz at a typical 2 dBm output power and operates from -40° to +85°C with internal regulation supporting +7 to 16 VDC supplies. |
|---|
More Product Information
- High performance GPS disciplined Time/Frequency standard
- Ethernet Interface for management and control
- Network Time Protocol (NTP)
- Multiple 1PPS outputs with individual delay compensation
- Multiple Low Phase Noise 10MHz outputs with software programmable level
- Time Code outputs including Have Quick, IRIG A, IRIG B, IRIG E, IRIG G
- Sync to GPS or to Have Quick/1PPS per ICD-GPS-060
- Choice of internal disciplined OCXO or Rubidium Oscillator
- Easy to Use
- No need to break the circuit or insert a shunt
- Small form factors for use on crowded boards
- Variety of Applications
- Bandwidths up to 100 MHz
- Peak currents up to 700 A
- Sensitivities down to 1mA/div
- High Precision Measurements
- Low frequency accuracy of 1%
- Integrated autozero capability
- Fully Integrated with Teledyne LeCroy Oscilloscope
- No additonal hardware is required
- Power is supplied from oscilloscope ProBus connection
- Automatic display of waveforms in Amps and calculated power traces scaled correctly in Watts
- Degauss and Autozero directly from oscilloscope user interface
- DCS025 Deskew Calibration Source
- Provides ability to precisely deskew most voltage probes along with 30, 150 and 500A current probes
- 2-port VNA with frequency options from 1 MHz to 8 GHz / 20 GHz / 43.5 GHz (options for 20, 50, and 100 meters)
- Extend remote ports 100 meters apart with PhaseLync synchronization
- Small and lightweight ports enable direct connection to DUT eliminating long cable runs
- Guaranteed performance to 43.5 GHz with Extended-K™ ports
- PC control takes advantage of external computer processing power and functionality
- No on-board data storage makes use in secure applications more convenient
- Common ShockLine control software delivers powerful debug and test capabilities
- PhaseLync control module MN25132A
HYPERLABS offers high-performance, ultra-broadband DC Feeders with low insertion loss throughout the specified bandwidth range.
- Uses optical-pumping cesium technology rather than magnetic selection for higher stability and longevity.
- Fully compliant with ITU-T G.811 PRC / G.811.1 ePRC standards.
- Supports essential timing outputs such as BITS, PPS (1PPS), and analog frequency.
- Compact, modular design suitable for deployment in racks, enabling scalable deployment across telecom, defense, utilities, and data-center environments.
- Long service life and improved holdover performance — offering enhanced reliability even during extended GNSS disruptions.
- Remote and secure management capabilities, including support for SNMPv3 and integration with orchestration/management suites (e.g. Mosaic Controller).
The VectorStar ME7838 Series broadband VNA offers the widest available single frequency sweep from 70 kHz to 110, (ME7838AX to 125), (ME7838EX to 125), to 145 GHz, and to 220 GHz with mmWave bands to 1.1 THz.
- The ME7838AX or ME7838EX version can easily be upgraded to 145 GHz and to 220 GHz
- All versions may be configured to include banded millimeter-wave modules up to 1.1 THz
- Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs.
- All versions support the 3744x-Rx receiver for noise figure measurements, including the ability to characterize differential noise figure, to 125 GHz
- Compact, lightweight mmWave modules (0.6 lb vs 7+ lbs and 1/50 the volume) offer low cost installation on smaller probe stations.
- 100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths
- Up to 4 GS/s sample rate
- Long Memory – up to 20 Mpts
- 10.1” capacitive touch screen display
- 16 Digital Channel MSO option
- MAUI - Most Advanced User Interface
- Designed for Touch
- Built for Simplicity
- Made to Solve
- Advanced Anomaly Detection
- Fast Waveform Update
- History Mode - Waveform Playback
- WaveScan - Search and Find
- Multi-Instrument Capabilities
- Protocol Analysis - Serial Trigger and Decode
- Waveform Generation - Built-in Function Generator
- Digital Voltmeter and Frequency Counter
- Future Proof
- Upgradeable Bandwidth
- Field Upgradable Software and Hardware Options
Bank of fixed resistance, capacitance and inductance standards with defined frequency characteristic up to 1 MHz for automated calibration of LCR meters.
- Automated RCL calibration
- Calibration data from 20 Hz to 1 MHz
- No need for pen and paper method
HYPERLABS offers the highest-performance Broadband DC Pick-off Tees on the market, with the industry’s lowest levels of insertion loss from DC to 110 GHz.
HYPERLABS, Inc.
Website
Founded in 1992, HYPERLABS is a leading designer and manufacturer of 145+ GHz Ultra-Broadband Baluns, DC Blocks, Pick-Off Tees, Bias Tees, and other high-performance components.
We also build TDR and Signal Integrity instruments used in the test and measurement industry. Our product line includes high-speed and electrostatic-protected instruments, all in low-power, portable form factors that can be controlled from any Windows PC.
