• Uses standard PC Ethernet port & hardware 
• Supports cable lengths up to 100 m (CAT-5e or CAT-6) 
• Simplified set-up with field proven Sapera LT software featuring CamExpert 
• Engineered to accommodate industrial environment with a ruggedized screw mount RJ-45 connector

• Frequency range of 9 kHz to 3.6 GHz/6 GHz/26.5 GHz/44.5 GHz; 44.5 GHz max. built-in preamp option
• Best close-in phase noise performance in middle range signal analyzer/spectrum analyzer: 
  • –123 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with all frequency models) 
  • –138 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with 3.6 GHz and 6 GHz models, meas.) 
  • –140 dBc/Hz (at 150 MHz center frequency, 10 kHz offset frequency with 3.6 GHz and 6 GHz models, meas.)
• 31.25 MHz analysis bandwidth (standard); 125 MHz max. (option)
• All-in-one solution with built-in signal generator option supports TRx tests (with 3.6 GHz and 6 GHz models)
• Measurement applications (options): Phase Noise Measurement, Noise Figure Measurement, Vector and Analog Modulation Analysis, BER Measurement, Pulse Radar Measurement Function

Continuous level sensors provide real-time monitoring across the entire height of a fluid container. These sensors use magnetic reed switches mounted along a PCB, combined with resistors to generate discreet voltage outputs. As a magnetic float moves along the sensor stem, it activates multiple reed switches, enabling precise and uninterrupted tracking of fluid levels. Advanced models like the CLS and HLS series incorporate capacitive or Hall effect technologies for high-resolution, programmable outputs in harsh environments.

• The AL143, 2×3 Spot Light is available in a wide range of wavelengths with multiple lens options. 
• Ideal Illumination for medium working distances. 
• Convenient mounting with an M4 nut channel. 
• Washdown version is available

• Excellent cutting results through precision cutting
• Improved sample quality through an exact and reproducible sample thickness
• Very durable blade, 7 times blade rotation possible (360°)
• Exact adjustment of the rotating speed
• The influence of the operator is minimized by the predefined blade feed
• Fine, manual dosing of the progressive feed
• Easy exchange of the wire grips possible, with standard tooling
• Intelligent control electronics ensure an intuitive and safe operation

• 3000 VA to 15000 VA of AC Output Power 
• Combines AC/DC source and power analyzer 
• Harmonic analysis of Voltage and Current 
• Programmable Impedance 
• AC, DC and AC+DC Output Modes 
• Multiple Chassis Configurations 
• Powerful output transient generation 
• High Crest Factor Capability 
• Arbitrary waveform generation 
• IEC 61000-3-2 and IEC 61000-3-3

There are 2 versions of the Xena chassis: the standard B720 and the high-performance B2400. Both versions consist of a 4U modular chassis that can be equipped with up to 12 Xena Ethernet test modules to provide high port density and low power consumption.

• Capture from legacy to the latest video sources through support for SD analog to UHD digital formats 
• Connect and switch between different video sources via Mini DisplayPort, HD-BNC, HDMI, and custom analog DVI1 connectivity 
• Handle multiple video sources with the simultaneous capture of up to eight HD or two UHD streams2 
• Optimize video transmission and storage through onboard multi-stream H.264 encoding 
• Minimize system footprint by way of a single-slot PCIe card design 
• Simplify application development using the Aurora Imaging Library, formerly Matrox Imaging Library (MIL), software development kit (SDK) 
• Deploy on a current platform of choice with support for 64-bit Windows® 7/10 and Linux