Meatest - 9000 Portable Multifunction Calibrator
65 ppm AC/DC multifunction calibrator designed specifically for calibration of 3½ and 4½ digit multimeters. 1050 V, 20.5 A, resistance, capacitance and temperature packed inside ultra portable, 11 kg body.
- Compact, light, ideal for onsite calibrations
- 1050 V, 20.5 A, resistance, capacitance, TC, RTD and frequency
- Basic accuracy 60 ppm
- All-round calibrator for 3.5 and 4.5 digit multimeters
9000 Portable Multifunction Calibrator is designed specifically for calibration of 3½ and 4½ digit multimeters. Advancing from M143 predecessor, the 9000 comes with much wider frequency ranges, capacitance function and stronger outputs to cover modern day handheld workload, including LoZ function calibration, panel meters, process meters and more.
User comfort
The 9000 is the same size as a briefcase and weighs just 11 kg so it’s ideal for onsite calibrations. Large control zones of 8” touchscreen display are forgiving to inaccurate inputs and well-thought-out touch control design make the 9000 easy for operators to work with.
Automation-ready
USB, Ethernet and IEEE488 interfaces enable remote control and automation in calibration labs as well as industrial test rigs. The 9000 is fully compatible with Meatest calibration SW package CALIBER/WinQBase, including CamOCR Camera Readout Module which makes handheld multimeter calibration incredibly effective.
|
DC voltage |
0 - 1050 V ± 60 ppm / year |
|---|---|
|
AC voltage |
1 mV - 1050 V, 10 Hz - 100 kHz sinusoidal & non-sinusoidal waveforms ± 500 ppm / year |
|
DC current |
0 - 20.5 A ± 150 ppm / year |
|
AC current |
0 uA - 20.5 A, 10 Hz - 20 kHz sinusoidal & non-sinusoidal waveforms ± 700 ppm / year |
|
Resistance |
0 Ω - 600 MΩ ± 50 ppm / year |
|
Capacitance |
1 nF - 120 mF ± 0.25 % / year |
|
Temperature |
TC BCDEG2JKMNRST with cold junction compensation RTD ± 0.1°C / year |
|
Frequency |
0.1 Hz - 20 MHz ± 5 ppm / year |
More Product Information
Safran Ground Station is a turnkey ground segment solution with all required equipment and ground tools to proceed with removable media preparation and post-mission data retrieval and replay.
Key components are:
- Rugged Heavy duty Laptop PC for military environment
- RMM (Removable Memory Module) Docking Stations capable of reading up to 4 cartridges simultaneously, especially useful for mass debriefing.
- Ground software suite (RMM Manager, eZ Viewer, MUST), very intuitive and user-friendly interface, for replay and exploitation of data while allowing customizable configuration of the display for mission debriefing.
- Ruggedized Trolley Suitcase specifically adapted for the transport of the whole Ground Station.
This ground station, tested and approved by Safran before delivery, helps to accelerate the deployment on every integration Labs, Air Bases, and can be safely transported between different locations and environments
- 16 channel GPS SPS receiver (standard)
- IRIG B Time Code (standard)
- HaveQuick/1PPS from external GPS receiver (standard)
- Temperature Compensated Crystal Oscillator (TCXO) – option
- Oven Controlled Crystal Oscillator (OCXO) standard
- Atomic Rubidium Oscillator – option
- 1PPS 1 Pulse Per Second Signal Time Mark
- Have Quick Time Code
- IRIG B Time Code
- NTP
10 ppm AC/DC multifunction calibrator for multimeters , power meters and generally all kinds of electric meters. Implementing modular design, 9010+ can be further customized to calibrate oscilloscopes, insulation testers, sources and transducers.
- 10 ppm accuracy
- 400 MHz and 1.1 GHz scope options
- Power quality functions, voltage from current
Three phase electric power/energy calibrator with power quality functions for calibration and testing of grid measuring appliance like power meters, power transducers or power quality analysers.
- Power quality and energy functions
- 0.01° phase shift accuracy
- 15 - 1000 Hz output
- Built-in multimeter for transducer calibration
- Floating current outputs for 3-wire power meters
- Voltage from Current function
20 ppm calibrator of DC process signals designed for calibration of evaluation units and process multimeters under demanding industrial conditions.
- 20 ppm accuracy
- 13°C - 33°C reference temp. range
- 100 V @ 25 mA output capacity
Series of single resistance, capacitance and inductance decadic standards for calibration of ohm meters, LCR meters and multimeters.
- Traceable, accurate and stable
- Low time constant
- Low temperature coefficient
- LMR Signal Analyzers with Coverage Mapping: P25, P25 Phase 2, DMR (MotoTRBO™), TETRA, NXDN, dPMR, PTC-ITCR, PTC-ACSES, NBFM, FDD & TDD LTE
- Broadband Signal Analyzers: LTE, WiMAX
- Interference Analyzer with Interference Mapping and support for MA2700A Handheld Interference Hunter
- Auto Test and Alignment of Motorola APX P25 mobiles and portables
- Direct measurement of up to 150 watt transmitters
- Spectrum Analyzer: 9 kHz – 1.6 GHz, optional to 6 GHz
- Cable and Antenna Analyzer: 500 kHz – 1.6 GHz, optional to 6 GHz
- Return Loss, VSWR, Insertion Loss, S11 / S21, DTF
- PIM Hunting
- Internal Power Meter, optional External Power Sensor
- Handheld, battery-operated design
- Weighs less than 7.6 lb (including battery)
- Rugged, field-proven design using Anritsu's 9th generation hardware platform
- Daylight viewable color touchscreen display
- Superior Immunity to RF interference
- Remote control via Ethernet
- Standard three-year warranty (battery one-year warranty)
The Mobile Telemetry Rack (MTR) integrates state-of-the-art telemetry capabilities utilizing the RTR-X4 & GMDR recorder providing the ideal portable telemetry checkout system, able to receive demodulation, record, process and display your data throughout your system development.
Based on the Cortex architecture, the 4U chassis-based CORTEX RTR-X4 can support up to four channels providing the utmost flexibility and capability a Telemetry Receiver can achieve.
The GMDR Chapter 7 recorder fits particularly well for the flight test support where operability and flexibility is essential. Not only the does the Telemetry rack provide a rich set of features, the Dell Server comes with the standard Safran software tools you expect: D4 Recorder, C10 Extract, eZ Viewer Data Verification and Quick Look Software.
Additionally, multiple projects can be supported by just swapping out the OS & media drives in support of classified projects.
Power Subsystem for Transportable Military test stand
- Provides eight channels of programmable DC power with output isolation function
- Output disconnect function
- Total control via Ethernet within power supply
- Mounted in custom in transportable shock-mount case
Meatest
We develop and manufacture electrical calibration instruments for calibration laboratories and testing facilities in electronics, engineering, utility, aeronautics and telecommunications sectors. Designed for automated calibrations our instruments bring effective solutions to customers like NPL, Samsung, Siemens and Volkswagen.
Contact Details
Meatest, spol. s r.o. Headquarters
Železná 509/3, Czech Republic - 619 00 BRNO
GPS: 49°10'13.93"N,16°36'53.2"E
Phone: 420-543-250-886
Fax: 420-543-250-890
Email: meatest@meatest.cz
Test & Measurement
Download Line Card
