Safran DSI - CORTEX RTR-X1 Compact COTS Telemetry Receiver
The CORTEX RTR-X1 (formerly RX-1) is a compact, dual-channel telemetry receiver with a pre-D combiner, designed to span all IRIG frequency bands and conform to IRIG-specified modulations.
This off-the-shelf (COTS) product leverages the rock-solid CORTEX RTR technology components, inheriting their renowned RF performance and signal processing prowess.
The RX-1 excels in test range scenarios, offering cutting-edge features to ensure maximum data accessibility. Trust the RX-1 for top-tier telemetry reception in challenging conditions.
LOOKING FOR AN ADVANCED SOLUTION?
The CORTEX RTR-X4 is one of the most advanced digital telemetry receivers on the market with its well-recognized RF performance and signal processing capability.
The 4U chassis-based RTR-X4 can support up to four channels providing flexibility and capability as well as a rich set of features for different frequency bands, modulations, decoders and output formats.
RTR-X1 FEATURES
|
STC & LPDC |
Space Time Coding and LPDC supported, as well as Many Advanced Features |
|---|---|
|
DQM/DQE |
Embedded Data Quality Metrics / Encapsulation compatible with Best Source Selector |
|
EQ+ |
Adaptive Equalizer for all Modulations, on Video and PCM outputs |
|
CH. 10 & IRIG-18-20 Output |
Easy and Modern UDP Data Spreading |
|
Front Panel Controls |
3 TFT Color Screens and Keyboard on Equipment, and Full Control from External KVM |
More Product Information
Safran’s SEEING™ 130 Wide includes a unique medium focal length catadioptric optics, limited by diffraction only and with ultra-low distortion, offering perfect imaging over 35 mm full-frame image format. It is fitted with a 10megapixel sensor.
SEEING™ 130 Wide enables high Signal to Noise Ratio for multispectral (MS), hyperspectral (HS) and low light level imaging. SEEING™ 130 Wide includes a spectral filter with 23 bands covering Blue, Green, Red, Near InfraRed and Red Edge MS, for a broad spectral range between 475 and 900nm. SEEING™ 130 Wide has a large Field of View of 6.3° x 4.3° / 54 x 36 km2 from a 500km/310 miles orbit.
In addition to its a thermal design within a robust structure, SEEING™ 130 Wide has a low SWaP, saving launch and operational costs.
The Mission Recorder Cockpit Remote Control Unit is mounted in a cockpit dashboard and connect to a recorder system. The MCRCR shows status information on the NVG compatible display and can remote control the Mission Recorder System.
The ENERTEC™ mission data processing and distribution units are dependable, cost-effective solutions designed to facilitate field and mission data handling, processing, storage, analysis, and distribution. These units are compatible with both manned and unmanned ground, air, and sea vehicles, offering a dependable resource. Each unit undergoes rigorous testing and validation, adhering to industry-standard testing procedures such as DO-160 and MIL-STD-810.
The SPARTE 900 series antenna stands as a testament to reliability and performance, tailored for mission-critical applications where telemetry reception is paramount. This field-proven product ensures accurate tracking of flying targets, such as aircraft or space launch vehicles, even at significant distances, thanks to its high gain and large aperture design.
The robust and durable construction of the SPARTE 900 series guarantees optimal performance in any scenario: an aluminum-alloy reflector for enhanced surface accuracy, SCM tracking feeds for dependable and precise tracking, and dual-drive motors for redundancy and no-backlash operation.
Additionally, the SPARTE 900 series comes equipped with a riser that integrates the Antenna Drive cabinet and any necessary equipment, allowing for optimal positioning in close proximity to the antenna.
The N-CUBE comes as a unique solution that combines GNSS signal processing and RF front-ends. It implements the latest state-of-the-art positioning and synchronization techniques, to reach top class of performances for Real-Time Precise Onboard Orbit Determination (P2OD) and accurate time synchronization.
With its small and high ruggedized design, XMA is the best fit for remote data acquisitions in harsh and small space areas.
It is the perfect candidate for network telemetry applications and remote acquisitions, to reduce the wire intrusiveness, and acquire the data closer to the sensors.
XMA also allows data recording, data processing, GPS localization and data transmission. XMA has the smallest size/channel types ratio, and proposes optimized module set for a large number of data type acquisitions, with state-of-the-art accuracy.
A complete set of status and health information of the unit is remotely available for live monitoring and accurate data qualifiers.
X-LITE (EWC27) has been designed with for small satellites flying in Low Earth Orbit. One of the main challenges is low consumption of radio communication links. X-LITE (EWC27) offers high data rate telemetry and robust X band transmission.
The highly flexible modular GMDR system is a versatile and future-proof solution for acquisition, recording, dissemination and replay of FTI data in ground station applications.
With its high integration, incomparable range of supported video interfaces and full compatibility with global leading MDR products, the GMDR integrates seamlessly into customers‘ existing test range topologies.
With its intelligent data reduction through segmentation, pre-selection and filtering as well as the capability to freely disseminate subsets of data among several network destinations, GMDR efficiently reduces the operator‘s workload when analyzing test results.
For standard PCM/Ch7-Telemetry applications, two simplified, cost-efficient variants with integrated PCM/Ch7-Telemetry signal boards and one Data Express technology (DE50)- compatible storage media slot are available.
The SPARTE 1300 series antenna is a tried-and-tested solution designed for mission-critical applications where reliable telemetry reception is essential. This antenna excels at accurately tracking flying targets, such as aircraft or space launch vehicles, even over long distances, thanks to its high-gain, large-aperture design.
Built with a robust and sturdy construction, the SPARTE 1300 series guarantees optimal performance in any scenario. It features an aluminum-alloy reflector for enhanced surface accuracy, SCM tracking feeds for dependable and precise tracking, and quad-drive motors for redundancy and no-backlash operation.
KapCOM (EWC33) is a new generation of transceivers with high performance Telemetry, Tracking & Command (TT&C) service. It is used on OneWeb constellation & is based on the heritage of EWC15 used in key space missions like ROSETTA, DEEP IMPACT, …
Safran DSI
Safran DSI Testing & Telemetry provides complete, end-to-end solutions covering instrumentation, mission systems, onboard recording, and transmission, through to base stations for data monitoring and control. Our solutions are platform-agnostic and adaptable to customer mission needs.
