Safran DSI - HEIM MDR-GT / MDR-GTS High-Speed & Secure Data Recorder
The MDR-GT / GTS is the ultra-fast on-board flight test (16 Gbps) instrumentation solution. The MDR family is technically based on a common mainframe with many high-end built-in interfaces and functions. The MDR-GT / GTS is highly customizable: functions and requirements can be addressed by adding dedicated interface modules, offering a variety of configuration options for all applications and requirements (MDR modules compatibility). Because Cybersecurity is key, the MDR-GTS has been built with secure functions: Data-At-Rest (FIPS 140-2), Key Access Management, Removable Non-Volatile Memory.
MDR-GT / MDR-GTS Features
|
Ultra-High Data Rate and Storage Capacity |
Up to 16 Gbit/s and up to 64 TB |
|---|---|
|
Advanced Data Capabilities |
On-Board Data Analysis |
|
Extended Configuration Flexibility |
User-Configuration Canister Concept |
|
Integrated Telemetry Outputs |
IRIG 106 Chapter 7 Support |
|
Full Spectrum of Interfaces |
10GigE, Video, Fibre Channel, ARINC 429, PCM, MIL-STD-1553, H.265 Video, Analog |
|
Cybersecurity |
Data-At-Rest Capabilities (encryption key management), Removable Secure Operational Disk (for extraction of non-volatile memory from system) |
More Product Information
The highly flexible modular GMDR system is a versatile and future-proof solution for acquisition, recording, dissemination and replay of FTI data in ground station applications.
With its high integration, incomparable range of supported video interfaces and full compatibility with global leading MDR products, the GMDR integrates seamlessly into customers‘ existing test range topologies.
With its intelligent data reduction through segmentation, pre-selection and filtering as well as the capability to freely disseminate subsets of data among several network destinations, GMDR efficiently reduces the operator‘s workload when analyzing test results.
For standard PCM/Ch7-Telemetry applications, two simplified, cost-efficient variants with integrated PCM/Ch7-Telemetry signal boards and one Data Express technology (DE50)- compatible storage media slot are available.
The SPARTE 700 series is a top-tier dual-axis antenna that boasts dish sizes ranging from 20 to 24 feet.
Its high gain and large aperture make it the ideal choice for tracking any flying target, such as aircraft of launch vehicle. This antenna series features a rock-solid design that guarantees peak performance under all conditions: an aluminum alloy reflector that enhances surface precision, SCM tracking feeds for trustworthy and accurate tracking, and dual-drive motors for redundancy and backlash prevention.
Furthermore, for applications that demand the utmost in performance, the SPARTE 700 series is also available in skid-mounted and trailer transportable and 3-axis gyro-stabilized versions.
The CORTEX Best Source Selector (BSS) is the ultimate choice for real-time telemetry source selection. It’s the go-to tool for pinpointing the best Telemetry source among multiple antennas tracking the same airframe across various channels.
The Best Source Selector streamlines the selection process by automatically choosing the top Telemetry stream, even from up to 16 sources or more, using a combination of signal quality metrics and other criteria. With its extensive capabilities in aligning paths and compensating for delays, the CORTEX Best Source Selector ensures optimal source selection, no matter where the antennas are located or what kind of range infrastructure you’re working with.
Configuring, managing, and integrating the system are crucial steps for ensuring the success of flight testing and achieving precise telemetry. eZ Software is your go-to solution.
- eZ SetUp software allows to configure from a single acquisition unit to a complete acquisition system within a network architecture.
- eZ Operation software is an advanced tool for centralized supervision and control of complex test systems from an onboard operator station.
- eZ Processing / Advantys software offers advanced functions for data display and processing.
Acquire high quality images with accurate radiometry for LEO (Low Earth Observation) earth observation applications with 65 MP focal plane and control electronics. From a 500 km orbit, SEEING™ 230 Ident has 9 x 6 km2 swath, offering a 1.03m native Ground Sample Distance (GSD), and features a super-resolution optional mode providing 70cm GSD. Thanks to its unique design, SEEING™ 230 Ident has an ultra-low SWaP factor. It is made of advanced ceramic material for strength during launch and stability during operation in space. It is athermalized and gradient insensitive between -10°C to +50°C. It has a low mass, below 8kg, saving both platform and launch costs.
N-XONOS is a X-band transmitter dedicated to small satellites and designed to answer to an increasing demand of high data rate transmission. It is a new generation of transmitters on an innovative design.
Safran’s SEEING™ 130 Wide includes a unique medium focal length catadioptric optics, limited by diffraction only and with ultra-low distortion, offering perfect imaging over 35 mm full-frame image format. It is fitted with a 10megapixel sensor.
SEEING™ 130 Wide enables high Signal to Noise Ratio for multispectral (MS), hyperspectral (HS) and low light level imaging. SEEING™ 130 Wide includes a spectral filter with 23 bands covering Blue, Green, Red, Near InfraRed and Red Edge MS, for a broad spectral range between 475 and 900nm. SEEING™ 130 Wide has a large Field of View of 6.3° x 4.3° / 54 x 36 km2 from a 500km/310 miles orbit.
In addition to its a thermal design within a robust structure, SEEING™ 130 Wide has a low SWaP, saving launch and operational costs.
The N-CUBE comes as a unique solution that combines GNSS signal processing and RF front-ends. It implements the latest state-of-the-art positioning and synchronization techniques, to reach top class of performances for Real-Time Precise Onboard Orbit Determination (P2OD) and accurate time synchronization.
Sensors acquisition and recording for troubleshooting is a cumbersome process in a fully furnished or operational aircraft, especially when time and low footprint are key drivers.
This is no more the case with Safran new solution µMA:
- its cylindrical form factor allows easy installation by just requiring a standard clamp used to mount tubes
- its battery power supply and its wireless connectivity removes the need of installing any harness in the aircraft.
All these capabilities are available while providing high measuring performance and harsh environment ruggedized in line with Safran standard solutions.
Safran DSI
Safran Defense & Space, Inc. (Safran DSI) is a leading provider of cutting-edge solutions designed to address the evolving challenges of national defense and advanced space missions. Headquartered in Arlington, Virginia, Safran DSI operates through specialized business units in Optronics, Space Solutions, Testing & Telemetry, Geospatial Artificial Intelligence (AI), and Assured Positioning, Navigation, and Timing (PNT). Safran DSI leverages its parent company's innovative technologies and global resources to deliver unparalleled solutions across air, land, sea, and space domains.
Testing & Telemetry BU provides complete end-to-end solutions from instrumentation, mission systems, on board recording and transmitting to base station for monitoring and controlling data. Our complete solutions are platform agnostic and are adaptable to the customer mission needs. Our instrumentation and telemetry turnkey solutions for mobile and stationary systems. This includes, but not limited to, data acquisition units (DAUs), on board recording, ground receiving, recording, and processing applications for fixed and rotary wing, manned and unmanned systems, eVTOL aircraft, as well as missile systems and space rockets/launchers. We offer comprehensive data management solutions for operational aircraft allowing for ISR, Search & Rescue, mission data loading & data transfer and pilot training & debriefing.
Contact Details
Safran Defense & Space, Inc.
3005 Business Park Drive, Norcross, GA 30071, USA
Phone: 770-753-4017
Test & Measurement