Safran DSI - eZ Software Suite Flight Test Configuration, and Data Processing Software
- Complete System Software Suite: Configuration, Monitoring, Decommutation, Processing and Visualization
- Extended Configuration Flexibility: End-to-End System from Data Acquisition Units to Data Visualization & Analysis
- Integrated Telemetry Outputs: Compliant with IRIG 106, Chapter 4, 7/10, IENA and DAR Network Standards
- Simple Data Management: Data availability managed at high-level for one-click modification of data streams
- Full Spectrum of Interfaces: 10GigE, Video, Fiber Channel, ARINC 429, PCM, MIL-STD-1553, H.265 Video, Analog...
- Enhanced Productivity: Capture efficiently your needs and let the automated features propose you the best configuration settings
Configuring, managing, and integrating your flight test system are crucial steps for ensuring the success of your campaigns and achieving precise telemetry. eZ Software is your go-to solution. eZ includes:
1. eZ Set Up, Instrumentation Configuration Software
Configure from a single acquisition unit to a complete acquisition system within a network architecture.
- Defining individual equipment (acquisition unit, recorders, switches, workstations, cameras) compatible with: XMA, MDR, MDR-GTS, GMDR
- Establishing network connections
- Conducting data acquisition (sensors and digital bus) at high and low levels, with an import function
- Manually or automatically generating output streams: PCM IRIG-106 Ch4, IRIG-106 Ch10, IRIG-106 Ch7, IENA, or DAR
- Configuring the complete system
- Real-time monitoring of the health of each component, down to measurement channel status
- Instant overview of acquired data (quick look)
- Recording of raw data
2. eZ Operation, On-Board Instrumentation Management & Control Software
- Advanced tool for centralized supervision and control of complex test systems from an onboard operator station.
- Streamlined setup of complex networks, acquisition units, recorders, and switches
- Real-time supervision through a synoptic view of the system, covering each acquisition unit, recorder, switch, as well as the network
- Consolidated system commands accessible on a single screen
- Synthesis of supervision data, generating report files that include reported alarms and events, along with the status of each equipment
- Real-time preview of the complete list of acquisitions (analog and digital)
- Centralized system monitoring
3. eZ Processing / Advantys, Data Display and Processing Software
Advanced functions for data display and processing.
- Real-time visualization of raw or processed parameters, either on board or on the ground, in a user-configurable graphical format
- Customized data replay with visualizations
- Real-time extraction and conversion of parameters into physical values, with or without applying a calibration function
- Creation of processed parameters through user functions in C language
- Configurable user alarms based on parameter value limits
- Recording of raw or processed data for future replay
- Automatic import of conversion tables by the eZ SetUp software, allowing users to focus on data analysis without the risk of errors
eZ Software Suite Features
|
Complete System Software Suite |
Configuration, Monitoring, Decommutation, Processing and Visualization |
|---|---|
|
Extended Configuration Flexibility |
End-to-End System from Data Acquisition Units to Data Visualization & Analysis |
|
Integrated Telemetry Outputs |
Compliant with IRIG 106, Chapter 4 / 7, / 10, IENA and DAR Network Standards |
|
Simple Data Management |
Data Availability Managed at High Level for One-Click Modification of Data Streams |
|
Full Spectrum of Interfaces |
10GigE, Video, Fiber Channel, ARINC 429, PCM, MIL-STD-1553, H.265 Video, Analog |
|
Enhanced Productivity |
Capture Efficiently your Needs and Let Automated Features Propose you the Best Configuration Settings |
More Product Information
- Capture from legacy to the latest video sources through support for SD analog to UHD digital formats
- Connect and switch between different video sources via Mini DisplayPort, HD-BNC, HDMI, and custom analog DVI1 connectivity
- Handle multiple video sources with the simultaneous capture of up to eight HD or two UHD streams2
- Optimize video transmission and storage through onboard multi-stream H.264 encoding
- Minimize system footprint by way of a single-slot PCIe card design
- Simplify application development using the Aurora Imaging Library, formerly Matrox Imaging Library (MIL), software development kit (SDK)
- Deploy on a current platform of choice with support for 64-bit Windows® 7/10 and Linux
KapCOM (EWC33) is a new generation of transceivers with high performance Telemetry, Tracking & Command (TT&C) service. It is used on OneWeb constellation & is based on the heritage of EWC15 used in key space missions like ROSETTA, DEEP IMPACT, …
- 2-port VNA with frequency options from 1 MHz to 8 GHz / 20 GHz / 43.5 GHz (options for 20, 50, and 100 meters)
- Extend remote ports 100 meters apart with PhaseLync synchronization
- Small and lightweight ports enable direct connection to DUT eliminating long cable runs
- Guaranteed performance to 43.5 GHz with Extended-K™ ports
- PC control takes advantage of external computer processing power and functionality
- No on-board data storage makes use in secure applications more convenient
- Common ShockLine control software delivers powerful debug and test capabilities
- PhaseLync control module MN25132A
The PPS®5000, produced by Safran Spacecraft Propulsion, is a Hall Effect Thruster purposely designed for “all-electric” satellites. It can operate in high-thrust or high specific impulse mode,and offers an operating lifespan of about 20,000 hours. This means it can handle orbital positioning and station-keeping duties for a wide range of telecom and navigation satellites, as well as exploration spacecraft. The PPS®5000 was fully qualified in 2021.
-
Versatile temperature range for extreme environments
-
IEEE 1588 PTP
-
Power over Ethernet
-
P-Iris and DC-Iris lens control
-
Monochrome (GT2450) and color (GT2450C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
- STC and LPDC: Space Time Coding and LPDC supported, as well as many advanced features
- CH. 10 & IRIG218-20 Output: Easy and Modern UDP Data Spreading
- DQM/DQE: Embedded data Quality Metrics / Encapsulation compatible with Best Source Selector
- Front Panel Controls: 3 TFT Color Screen and Keyboard on Equipment, and Full Control from External KVM
- EQ+: Adaptive Equalizer for all Modulations, on Video and PCM outputs
-
Versatile temperature range for extreme environments
-
IEEE 1588 PTP
-
Power over Ethernet
-
P-Iris and DC-Iris lens control
-
Monochrome (GT2000) and color (GT2000C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
IMX273 CMOS sensor
-
ALVIUM image processing
-
USB3 Vision
-
Various hardware options
-
Monochrome (1800 U-158m) and color (1800 U-158c) models
-
ALVIUM® Technology for on-board image processing
-
USB3 Vision interface for GenICam SFNC features
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Micro-B USB 3.1 Gen 1 connector with screw locks for industrial applications
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for both embedded and machine vision applications
-
Teledyne e2v Sapphire CMOS sensor
-
Switchable shutter modes
-
Power over Ethernet
-
60 fps at full resolution
-
Monochrome (G-192B) and color (G-192C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
Safran DSI
Safran DSI Testing & Telemetry provides complete, end-to-end solutions covering instrumentation, mission systems, onboard recording, and transmission, through to base stations for data monitoring and control. Our solutions are platform-agnostic and adaptable to customer mission needs.
