You design the future. We help you make it happen.
Safran DSI - Mission Ground Station Transportable & Rugged Benchtop Whole Station
- Preparation and Post-Mission Data Retrieval and Replay
- IRIG-106 CH10 Data Replay and Configuration of Display
- Simultaneous Replay of up to 4 Cartridges for Mass Debriefing
Our Ground Station is a turnkey ground segment solution with all required equipment and ground tools to proceed with removable media preparation and post-mission data retrieval and replay.
Key components are:
- Rugged Heavy-Duty Laptop for military environment
- RMM (Removable Memory Module) Docking Stations capable of reading up to 4 cartridges simultaneously, especially useful for mass debriefing.
- Ground software suite (RMM Manager, eZ Viewer, MUST), very intuitive and user-friendly interface, for replay and exploitation of data while allowing customizable configuration of the display for mission debriefing.
- Ruggedized Trolley Suitcase specifically adapted for the transport of the whole Ground Station.
This ground station, tested and approved by Safran before delivery, helps to accelerate the deployment on every integration Labs, Military Bases, and can be safely transported between different locations and environments
More Product Information
- Calibration-grade metrology standards
- Used for VNA calibration and/or calibration validation
Fixed flush and fixed offset short circuit terminations (shorts) are used to establish reference planes in transmission systems and as key elements in the calibration of vector network analyzers (VNAs). Offset shorts can be used for banded calibrations of VNA. Those with the longest offset are often used to evaluate the calibration effectiveness of a VNA by measuring the effective source match after calibration.
Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 1kOhm), the input impedance of these probes remains nearly constant over their entire frequency range. A traditional /10 passive probe will have a 10 MOhm) input impedance at DC, however this impedance drops rapidly with frequency, passing below the input impedance of a transmission line probe at less than 100 MHz.
- Best-in-Class Servo Controls: User Selectable Servo Controls
- Modular L, S or C Band: Simple Add-On Upgrade without any Structural Change
- Hassle-Free Maintenance: Easily Accessible Electronics & Mechanics Above Az
- SCM 1000 HZ Scan Rate: Common Design for Main & ACQ-AID Feed
- Shipborne Ready: IMU Add-On for Shipborne Operations
- Ultra-High Data Rate and Storage Capacity: Up to 16 Gbit/s and up to 64 TB
- Advanced Data Capabilities: On-Board Data Analysis
- Extended Configuration Flexibility: User-Configuration Canister Concept
- Integrated Telemetry Outputs: IRIG 106 Chapter 7 Support
- Full Spectrum of Interfaces: 10GigE, Video, Fiber Channel, ARINC 429, PCM, MIL-STD-1553, H.265 Video, Analog…
- Cybersecurity: Data-At-Rest Capabilities (encryption key management), Removable Secure Operational Disk (for extraction of non-volatile memory from system)
ATEX and IECEx certified optocouplers are designed for use in intrinsically safe circuits within hazardous environments. These solid-state devices provide galvanic isolation and signal transmission without becoming ignition sources, even under fault conditions. Ideal for industries such as oil & gas, mining, and energy, they offer high isolation resistance, fast switching, and long operational life in compact, rugged packages.
- Designed for Harsh Environment: High Shocks, High Vibration, EMI/EMC, -50/+105 Celsius, Waterproof, Lightning
- Ultra Compact and Generic: Generic Analog Module, 2x3" / 51x76 mm, from 1 to 16 modules per stack
- Best data Ever: 1000 ppm in extreme temperature range
- Easy to Configure: eZ software Suite
- Process & Command: Preprocess Data and Program Commands to External Systems
- Multi Format Output Stream: PCM Chapter 4, PCM Chapter 7, Low latency video, UDP output
EMI Camera for Low Emission / High Field Use
- 30x Optical Zoom
- Low light uses 0,05 lux (day) and 0,005 lux (night)
- Integrated microphone
- Battery or wall-powered
- Single Fiber operation (duel direction)
- Local controls on back (zoom/pan/tilt/focus/..)
- Options for Pan/Tilt, Joystick, HIRF, recording, motion triggering, OCR, ...
- Highly precise and stable laser projection
- Optimized for projection on 3D objects
- Excellent beam performance by the fiber-coupled laser source
- Large aperture (up to 80° x 80°) enables large working areas
- Data transmission via ethernet adapter
- Easy integration into multi projection systems
- Intuitive graphical user interface ZLPSuite
- Advanced programming interface (API) for C++, C#, Python
- Client-/Server architecture
- PLC-Gateway (Siemens S7)
The ZLP2 is a powerful laser projector equipped with a fiber-coupled Z-FIBER laser source to deliver outstanding beam quality. With an accuracy of 0.25 mm per meter of working distance, it is ideal for precise projections in traditional applications such as woodworking and stone processing, as well as demanding composite material tasks. Operation is simple via the intuitive ZLP-Suite software with graphical user interface or through the integrated programming interface (API). In addition, native control via TCP/IP-enabled PLC systems is supported, allowing seamless integration into automated workflows. The ZLP2 thus provides a flexible, expandable, and reliable solution for industrial applications where precision and efficiency are critical.
- Complete System Software Suite: Configuration, Monitoring, Decommutation, Processing and Visualization
- Extended Configuration Flexibility: End-to-End System from Data Acquisition Units to Data Visualization & Analysis
- Integrated Telemetry Outputs: Compliant with IRIG 106, Chapter 4, 7/10, IENA and DAR Network Standards
- Simple Data Management: Data availability managed at high-level for one-click modification of data streams
- Full Spectrum of Interfaces: 10GigE, Video, Fiber Channel, ARINC 429, PCM, MIL-STD-1553, H.265 Video, Analog...
- Enhanced Productivity: Capture efficiently your needs and let the automated features propose you the best configuration settings
Safran DSI
Safran DSI Testing & Telemetry provides complete, end-to-end solutions covering instrumentation, mission systems, onboard recording, and transmission, through to base stations for data monitoring and control. Our solutions are platform-agnostic and adaptable to customer mission needs.
