Safran DSI - SPARTE 900 30.5 ft Telemetry Tracking Antenna
The SPARTE 900 series antenna stands as a testament to reliability and performance, tailored for mission-critical applications where telemetry reception is paramount. This field-proven product ensures accurate tracking of flying targets, such as aircraft or space launch vehicles, even at significant distances, thanks to its high gain and large aperture design.
The robust and durable construction of the SPARTE 900 series guarantees optimal performance in any scenario: an aluminum-alloy reflector for enhanced surface accuracy, SCM tracking feeds for dependable and precise tracking, and dual-drive motors for redundancy and no-backlash operation.
Additionally, the SPARTE 900 series comes equipped with a riser that integrates the Antenna Drive cabinet and any necessary equipment, allowing for optimal positioning in close proximity to the antenna.
TRACK YOUR AIRCRAFT OR SPACE LAUNCH VEHICULES WITH OUR LARGE APERTURE ANTENNA
And for the ever most demanding applications, the SPARTE 700 series exists in skid-mounted and trailer transportable and gyro-stabilized versions.
SPARTE 900 Features
|
Best-in-Class Servo Controls |
Digital Servo-Drives, Precise Reducers |
|---|---|
|
SCM 1000 HZ Scan Rate |
Common SCM Design for L/S/C/ an D S-band feeds |
|
Modular L, S OR C Band |
Simple Add-On Upgrade without any Structural Change |
|
Dual Drive |
Uninterrupted Operations, No Backlash |
|
Options on Request |
Long Loop Test Capability, Radome, Improved G/T |
More Product Information
The PPS®5000, produced by Safran Spacecraft Propulsion, is a Hall Effect Thruster purposely designed for “all-electric” satellites. It can operate in high-thrust or high specific impulse mode,and offers an operating lifespan of about 20,000 hours. This means it can handle orbital positioning and station-keeping duties for a wide range of telecom and navigation satellites, as well as exploration spacecraft. The PPS®5000 was fully qualified in 2021.
The N-SPHERE comes as a new generation of GNSS receiver. It implements the latest state-of-the-art positioning and synchronization techniques, to reach top class of performances for Real-Time Precise Onboard Orbit Determination (P2OD) and accurate time synchronization.
The SPARTE e100 is a hybrid antenna addressing the telemetry applications in S-Band, including hypersonic test articles.
The antenna is a combination of an Electronic Beam Steering supporting any elevation from -5° up to +95° and a single-axis mechanical rotation of the patch panel providing unlimited azimuth. The patch panel’s size enables the SPARTE e100 to achieve telemetry reception performance comparable to that of a 1.2m diameter dual-axis antenna.
This is achieved with a significantly simpler mechanical design, ensuring easier maintenance throughout the antenna’s operational lifespan.
The SPARTE e100’s rapid tracking capabilities, reaching speeds of up to 60°/s in azimuth and virtually infinite in elevation, make it an ideal “lock-on” antenna.
TM MAESTRO provides a comprehensive and centralized solution for monitoring and controlling telemetry infrastructure worldwide.
Designed to meet the critical needs of telemetry operators, this software offers a user-configurable GUI that adapts to various user profiles and mission phases, from preparation to live flight tests and station maintenance. TM MAESTRO is scalable and easily accommodates new telemetry equipment, allowing for the addition of an unlimited number of components, from antennas to decommutators, making it a highly flexible system.
The CORTEX Best Source Selector (BSS) is the ultimate choice for real-time telemetry source selection. It’s the go-to tool for pinpointing the best Telemetry source among multiple antennas tracking the same airframe across various channels.
The Best Source Selector streamlines the selection process by automatically choosing the top Telemetry stream, even from up to 16 sources or more, using a combination of signal quality metrics and other criteria. With its extensive capabilities in aligning paths and compensating for delays, the CORTEX Best Source Selector ensures optimal source selection, no matter where the antennas are located or what kind of range infrastructure you’re working with.
The Mission Recorder Cockpit Remote Control Unit is mounted in a cockpit dashboard and connect to a recorder system. The MCRCR shows status information on the NVG compatible display and can remote control the Mission Recorder System.
The ENERTEC™ mission data processing and distribution units are dependable, cost-effective solutions designed to facilitate field and mission data handling, processing, storage, analysis, and distribution. These units are compatible with both manned and unmanned ground, air, and sea vehicles, offering a dependable resource. Each unit undergoes rigorous testing and validation, adhering to industry-standard testing procedures such as DO-160 and MIL-STD-810.
Sensors acquisition and recording for troubleshooting is a cumbersome process in a fully furnished or operational aircraft, especially when time and low footprint are key drivers.
This is no more the case with Safran new solution µMA:
- its cylindrical form factor allows easy installation by just requiring a standard clamp used to mount tubes
- its battery power supply and its wireless connectivity removes the need of installing any harness in the aircraft.
All these capabilities are available while providing high measuring performance and harsh environment ruggedized in line with Safran standard solutions.
The NS1310 is a robust, compact data server and storage unit specifically designed for the challenging conditions of airborne environments.
This versatile system functions as a Network Attached Storage (NAS) unit and is equipped with a high-capacity Removable Memory Module (RMM).
The ENERTEC™ mission data processing and distribution units offer cost-effective and dependable solutions for field and mission data tasks, such as data acquisition, processing, storage, exploitation, and distribution. These units are suitable for use on both manned and unmanned ground, air, and sea vehicles. They undergo rigorous validation and formal qualification testing, adhering to standard test methods like DO-160 and MIL-STD-810.
The Mobile Telemetry Rack (MTR) integrates state-of-the-art telemetry capabilities utilizing the RTR-X4 & GMDR recorder providing the ideal portable telemetry checkout system, able to receive demodulation, record, process and display your data throughout your system development.
Based on the Cortex architecture, the 4U chassis-based CORTEX RTR-X4 can support up to four channels providing the utmost flexibility and capability a Telemetry Receiver can achieve.
The GMDR Chapter 7 recorder fits particularly well for the flight test support where operability and flexibility is essential. Not only the does the Telemetry rack provide a rich set of features, the Dell Server comes with the standard Safran software tools you expect: D4 Recorder, C10 Extract, eZ Viewer Data Verification and Quick Look Software.
Additionally, multiple projects can be supported by just swapping out the OS & media drives in support of classified projects.
Safran DSI
Safran DSI Testing & Telemetry provides complete, end-to-end solutions covering instrumentation, mission systems, onboard recording, and transmission, through to base stations for data monitoring and control. Our solutions are platform-agnostic and adaptable to customer mission needs.
