Southwest Microwave - N Connectors 18 GHz
Southwest Microwave N (18 GHz) Connectors
- Field replaceable
- Microstrip or stripline launch
- Male/female
- Flange-mount, thread-in or waveguide probe
Type N Jack (Female) 4 Hole .500 Square
Type N Jack (Female) 4 Hole 0.687 Square
Type N Jack (Female) 4 Hole 1.000 Square
Type N Jack (Female) Thread-In Waveguide Probe
Type N Plug (Male) 4 Hole .687 Square
Type N Plug (Male) 4 Hole 1.00 Square
More Product Information
A family of fanless, durable, SWaP-C optimized small form factor mission computers providing maximum ruggedization, processing, storage, and security at the edge across the modern, multidomain battlespace.
- Ready for Extremes - Lightweight, sealed, and designed to operate between -40°C and +70°C in harsh environments
- Military-grade Connectors - Protect against dust, dirt, debris, and water as well as electromagnetic interference
- Zero-trust Architected - Hardware-based security measures encrypt and isolate data as it is being processed.
- Combine up to 12 fail-safe building blocks, dual SPDT, SP4T, SP6T, or transfer switch in a compact 1U footprint
- Front “pluggable” relays facilitate field maintenance
- Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
- Flexible API supports IVI and Linux development environments minimizing software investment
- LXI Trigger Event implementation provides seamless test synchronization with external devices
- Store up to 128 relay state configurations for quick recall, including an automatic power up state
- Define exclude lists to avoid setting an undesirable configuration
- Relay odometer tracks closures to facilitate preventative maintenance
-
Unique Air Coplanar tip design with choice of beryllium copper (BeCu) or tungsten tip material
-
DC to 110 GHz models available in single and dual line versions
-
Low insertion and return loss with ultra-low-loss ( -L ) versions
-
Excellent crosstalk characteristics
-
Wide operating temperature -65 ° C to + 200 ° C
-
Wide range of pitches available, from 50 to 1250 µm
-
Individually supported contacts
-
Reduced contact (RC) probe tips for small pads
-
BeCu tip provides rugged, repeatable contact on gold pads
1.85 mm (V) DC to 67 GHz connectors from Southwest Microwave include field-replaceable 2- and 4-hole Flange-mount and standard or metric Thread-in Connectors, Direct-solder Cable Connectors, clamp-on End Launch Connectors, and the new Solderless Vertical Launch Connector.
- 8 Independent Channels, 2 Output Connectors
- Includes built-in pre-programmed sequencing.
- Provides control for computational imaging, including photometric stereo, extended depth of field, combined bright field + dark field, high dynamic range, and high resolution color.
- Ideal for multi-channel lights and multi-light stations. Due to power output constraints, some configurable light lengths may be limited.
- Housed within a compact enclosure with DIN rail mounting.
- Driven with SignaTech™ for improved safety and easy operation.
NOTE: NOT COMPATIBLE WITH C1 CONNECTORS
Southwest Microwave offers a full range of within-series and between-series precision adapters with near-metrology grade performance.
- High performing connector savers, DC to 110 GHz
- Economical solution for critical production and testing
- Approved for demanding environments such as Space and other Hi-Rel applications
- High repeatability and accuracy
- Available in various connector configurations
- Allan deviation σ(τ) = 2.7×10-11 T-1/2 for long life version and σ(τ) = 8.5×10-12 T-1/2 for high performance version
- Front or Rear access connectors
- 3U high (133mm / 5.24”) — less than 200mm depth, compatible with ETSI and 19” standards
- Accuracy better than ±1×10-12 / ±5×10-13 for high performance version
- 10 MHz low noise direct output
- Programmable 1 / 5 / 10 MHz TTL output
- 10 years warranty on cesium tube (3 years for high performance version)
- Redundant DC power supply inputs
- Remote control and monitoring via RS232 (fully manageable locally and remotely using SyncView Plus management system.
-
APS-H optical format CMOS sensor
-
PoCXP
-
4-DIN type connector
-
79.7 fps at full resolution
-
Monochrome (X-2620B) and color (X-2620C) models
-
Extended feature set with Sequencer Control and Multiple Region of Interest selection to support advanced imaging applications
-
On-board Defect Pixel and 2D Fixed Pattern Noise Correction for improved image quality
-
Simplified firmware update in the field via interface cables using GenICam File Access
-
Robust, fan-less design for industrial imaging applications
-
Heat-dissipation optimized housing to reduce image noise
-
Build-in tripod adapter and multiple mounting holes for eased system integration
-
DIN 1.0/2.3 CoaXPress connectors for secure operation in industrial environments
-
Single cable solution using Trigger and Power over CoaXPress
-
Comprehensive I/O functionality for extended control of connected system components
-
Select between B 270 ASG protection glass and filter types: IRC30 IR cut filter or Schneider 486 IR cut filter
Southwest Microwave
Since 1981, Southwest Microwave has delivered performance-leading interconnect solutions currently available from DC to 110 GHz for hi-rel/space, defense, instrumentation, integrated-circuit and PCB evaluation applications. Built in the USA to rigorous performance and quality standards, Southwest Microwave connectors deliver the industry’s lowest RF leakage, insertion loss and VSWR. Products include Super SMA, N, TNC, SSMA, 2.92mm, 2.40mm, 1.85mm, 1.35mm, 1.0mm and 0.9mm SuperMini connectors in a variety of mounting configurations, plus board-mount (end-launch, vertical launch, board-to-board) connectors, cable assemblies, coax contacts for multicavity connectors, adapters, installation tools and launch accessories for microstrip, stripline and coplanar launches.
Contact Details
Southwest Microwave - Corporate Headquarters
9055 S. McKemy St., Tempe, AZ 85284-2946, USA
Phone: 480-783-0201
Fax: 480-783-0360
Test & Measurement
Download Line Card
Embedded
Download Line Card
Document
