VIAVI - Xgig E1 EDSFF Interposer for PCI Express 4.0
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe data rates of 2.5, 5.0 and 8.0GTps
-
Supports 1 link of 4 or 8 lanes
-
EDSFF E1.L or E1.S NVMe SSD DUT (not supplied) plugs directly into the Interposer
-
Includes 4 high-quality, mini-SAS HD 4X cables for Analyzer connection
-
Data path uses high-speed linear redrivers to insure good signal capture with little or no tuning
-
Supports Analyzer side-band signal capture and triggering with display in multiple formats
-
The supplied power brick makes interposer power is independent of host system
-
Works together with the VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Supported by VIAVI Xgig Analyzer tools for trace capture with filter, trigger and more
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data
Xgig4K-PCIe4-X8-E1 is an Active Interposer optimized for developing, debugging and performance tuning NVMe SSD operation in high-density storage servers.
The VIAVI Solutions Xgig4K-PCIe4-X8-E1 is an Active Interposer for PCI Express® 4.0 is an Active Interposer optimized for developing, debugging and performance tuning NVMe SSD operation in high-density storage servers. Bidirectional PCIe 4.0 protocol data on 8-lanes can be captured at 16GTps for analysis.
More Product Information
-
Compatible with AD 98-20-40 & AD 99-03-04 compliant aircraft (Mod 6 and above)
-
Modular design for high reliability and low maintenance
-
Closed box calibration using front panel controls - performed annually
-
Battery powered with percent of charge displayed
-
Maintenance codes displayed to aid in troubleshooting
-
Distance-to-Fault (DTF) Mode determines the "length" of the wire or the approximate distance to a break in the wire or shield
-
Large selection of aircraft specific interface cables readily available
-
Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
-
TCAS and ADS-B Target Generator
-
Simulates 32 dynamic/400 static intruders
-
ADS-B squitter encode/decode
-
More test capability than any tester in the market, all packed into one box
-
Pulse and frequency measurement Transponder test option for Modes A, C, S
-
Optional Command set emulation for SDX-2000, ATC-1400A and S-1403DL
-
10.4 inch touch screen LCD display for operator control of all test set capabilities or can be remotely controlled via GPIB or Ethernet
-
Four port antenna simulation
-
Hybrid surveillance
-
Six independent transmitters and two receivers
-
Data parsing for analysis
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
Supports links of up to and including 4-lanes
-
NVMe SSD DUT (not supplied) plugs directly into the Interposer
-
Supplied with two high-performance custom cables for Analyzer attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with little or no tuning
-
Supports Analyzer side-band signal capture and triggering
-
Provides two differential clock connectors
-
Interposer power is independent of host system
-
A 120/220 AC in, 12V/3A DC output converter is included
-
LEDs give quick indicators of power and status
-
Format: Design based on 4-lane PCIe CEM specification
-
Supported by VIAVI Analyzer tools for trace capture with filter, trigger and more
-
Provides consistent, repeatable capture of link training, negotiation and other data
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
32 GT/s, PCIe 5.0 data rate operation. Fully compatible with other PCIe data rates of 2.5, 5.0, 8.0 and 16.0GTps
-
Link widths up to 8-lanes
-
Memory segmentation for capture of multiple traces
-
Simultaneous two-link, dual port capture is allowed by multiple users
-
Host-Client connection for remote debugging using Ethernet, or local debugging using USB
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer logic sub-blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/ Gather Lists (SGL) etc.
-
Cascade up to four Xgig captures into a single trace view
-
Full support of LTSSM for analysis
-
Field replaceable modular fan and power supply assemblies
-
LED’s give quick indicators of power and status
-
Works with the VIAVI Xgig software tool suite: Trace Control, Trace View, Expert™, Serialytics™
-
32GTps, PCIe 5.0 data rate operation. Fully compatible with other PCIe data rates of 2.5, 5.0, 8.0 and 16 GTps
-
Link widths to 16-lanes, including 1-, 2-, 4-, 8-lanes
-
256GB memory (128GB upstream and 128GB downstream)
-
Memory segmentation for capture of multiple traces
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Simultaneous capture of multiple links is allowed with multiple simultaneous users
-
Decodes all PCIe, NVMe and CXL traffic at all layers of the stack including the TLP, DLLP, and PHY layer packets
-
Flexible trigger events include training sequences, ordered sets, queue pairs, PRPs, SGL, SMB, etc.
-
Cascade captures from up to four Xgig chassis into a single trace view
-
Full support of PCI Express LTSSM analysis
-
Field replaceable power supply
-
LEDs give quick indicators of power and link status
-
Includes one-year hardware and three-year software warranties
-
Works with the VIAVI Xgig software tool suite: Trace Control, Trace View, Expert™, Serialytics™
-
Supported by a wide variety of Interposers (CEM, U.3, etc.)
-
GPS signals simulated: L1, L1C*, L2C*, L5*
-
Galileo signals simulated: E1, E5**, E5a**, E5b**
-
Simultaneous GPS/Galileo simulation
-
WAAS/EGNOS SBAS simulation
-
Static and dynamic simulations via NMEA-0183 File Record and Playback
-
12 channel configuration available with upgrade path (RAIM supported)
-
Programmable space vehicle (SV) parametrics and health
-
User or built-in GPS receiver referenced time and date
-
PVT data available via RS-232
-
User Defined Data Transferable between Linked GPSG units
-
Remote control interface Ethernet
** For tracking of E5 signals some receivers require synchronized E1 transmissions.
-
Provides precise storage I/O and TCP or UDP generation with full traffic flexibility and control
-
Accelerates Xgig® root-cause analysis through automatic triggering and advanced tracking of anomalies and errors
-
Enables auto-discovery of devices and automation of all remote testing and validation processes across complex network topologies
-
Operates up to 32GTps at PCIe 5.0 data rates
-
Downward compatible with PCIe data rates of 2.5, 5.0, 8.0 and 16.0GTps
-
Supports link widths up to 16-lanes
-
CEM adapter card endpoint DUT devices plug directly into the Test Stand
-
Includes cables for Analyzer connection
-
Supports Analyzer side-band signal capture and triggering with display in multiple formats
-
Data path uses high-speed re-drivers to ensure good signaling
-
Supports automatic link tuning for optimum communication and lowest BER
-
Modular, replaceable 600W power supply powers Test Stand and DUT
-
Supports testing of high-power graphics cards
-
LEDs give quick indicators of power and status
-
Size: Base Pod: 120 x 162 x 30 mm (DxWxH)
-
Works with the VIAVI Xgig5P-PCIe5-X16-PF Analyzer/Exerciser chassis platform
-
Supported by VIAVI Xgig™ Analysis tools for test setup, trace capture, protocol evaluation, etc.
-
Provides consistent, repeatable capture of link training, equalization negotiation and other information
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Contact Details
VIAVI Solutions Inc. Corporate Headquarters
6001 America Center Drive, 6th Floor, San Jose, CA 95002, USA
Phone: +1-408-404-3600
Fax: +1-408-404-4500