VTI Instruments - EMX-75XX PXIe Core Automated Test Equipment
- High Current - 300 mA Sink
- High Density - 64 Channels / Card
- Isolation - 1000 V
- Multiple Digital Logic Levels - LV TTL - TTL - 60 V Max, User Defined
- Flexible Configurations - Dedicated Input - Dedicated Output - Eight, 8-Bit Ports
- Flexible Software - Embedded Soft Front Panel - Common IVI Software Drivers
OVERVIEW
The EMX-75XX Series adds to AMETEK VTI Instruments' growing PXI Express (PXIe) Core Automated Test Equipment (ATE)TM family as a high-current, high-density digital input/output line of modules. Unlike many static I/O PXIe modules on the market today, the EMX-75XX Series can sink or source up to 300 mA on each channel. Delivering beyond just 2 V and 5 V, engineers can program the cards to support a wide range of voltages and more—on every channel, for both input and output.
ULTIMATE FLEXIBILITY
The specialized EMX 7510, EMX 7511, EMX 7512 and EMX-7519 cards offer 64 static Digital Inputs/Output channels. EMX-7513, EMX 7514, and EMX 7515 variations offer 1000V Isolation for specialized applications.
VTI SIGNAL INTEGRITY
Sourcing components from VTI means that every solution has the same proven signal integrity VTI has consistently delivered for the last 20 years. The EMX-75XX Series builds upon this legacy to accurately deliver signals from the test setup to the rest of the ATE system.
SOFTWARE COMPATIBILITY
With industry standard software including IVI drivers available, the EMX-75XX Series easily connects to the rest of any ATE configuration.
|
EMX-7510 |
Digital Input/Output – 64-CH DIO, Source/Sink, 60 V max Static I/O |
|---|---|
|
EMX-7511 |
Digital Input/Output – 64-CH, DIO TTL, Static I/O |
|
EMX-7512 |
Digital Input/Output – 64-CH, DIO LV TTL, Static I/O |
|
EMX-7513 |
Digital Input/Output – 32DI/32DO, Source/Sink, 60 V max, Isolated Static I/O |
|
EMX-7514 |
Digital Input– 64 DO, Source/Sink, 60 V max, Isolated Static I/O |
|
EMX-7515 |
Digital Input– 64 DI, 60 V max, Isolated Static I/O |
|
EMX-7519 |
Digital Output - 64-CH, Eight 8-bit Ports |
More Product Information
- 4-Channel, 204.8 Ksa/s per channel, 24-Bit DACs
- -115 dB spurious free dynamic range
- Integrated 2-Channel 64-bit tachometer
- Integrated 4-Channel DIO
- Tight synchronization with DSA analyzers
- Ideal for rotational measurement, and stimulus-response applications such as vibration test
- Output modes including Sine, Burst Sine, Chirp, Burst-random and continuous random
- 8 frequency counter channels, 16 isolated digital I/O channels, 2 isolated DAC channels in a single card
- Single frequency measurement range that works from 0.05 Hz to 1 MHz
- Very stable TCXO base clock, 50 MHz ±1 ppm
- 195 kΩ Input impedance with selectable coupling (AC/DC)
- Wide differential input voltage range (±48 V) with up to 250 V working common mode voltage
- Programmable threshold and hysteresis levels with 1 mV resolution
- Support for quadrature encoder
- Isolated DIO channels with up to 60 V compliance
- Isolated and independent 16-bit DAC channels, configurable for voltage or current output
Signal Generations, Arbitrary Waveform generation and Digital to Analog output modules for providing signal simulation capability
- Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
- PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
- Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
- High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
- Single Step and Fast playback mode of test results.
- Dual Voltage ranges that support over voltage testing on 480V based systems
- Instrument Setups for quickly re-establishing the known instrument state
- 500uS time resolution for Transients
- Virtual Panels control software included
- Non-Linear current waveform programming during Load mode
- Phase coordination among multiple units (LKM/LKS)
- Powerful set of analog controls for PHIL and Modulation tests
- Trigger In & Out to permit extensive coordination with external systems
- Extensive Onboard diagnostics
- Digital I/O, including RS232, USB, Ethernet (GPIB optional)
- Intuitive 5” color display for ease of navigation
- Auto-paralleling for maximum flexibility with multi-chassis configurations
- Separate terminal blocks for single-phase and three-phase AC outputs
The APEX Turbine Data System (DS) is the next generation of data acquisition, control, setup, and online analysis. It reliably acquires time-synchronized data from a network of digitizers, regardless of sample rate or sensor type.
The EMX-2500 is a Gigabit Ethernet LXI Controller for the EMX Series of PXIe Instruments.
-
Complete Test Solutions
-
Complete test solutions for emissions and immunity compliance testing of AC and DC powered products
-
-
Single & Three Phase Operation
-
Offers flexibility
-
-
Direct PC Bus Access
-
Provides high sampling rate and resolution for accurate measurements and high speed data transfers
-
-
PC based harmonic & flicker testing
-
provides real-time full color data display updates and continuous PASS/FAIL monitoring.
-
-
Supports Global Standards
-
Supports European and Japanese standards
-
-
Easy To Use Interface
-
Provides IEC test setup, data analysis, display, MS Word test reports, and data files are generated in MS Excel format
-
-
High resolution
-
Data storage to disk in for post-acquisition analysis and reporting
-
-
Single Step
-
Single Step and Fast Forward replay of recorded test data at 200 mSec
-
VXI Chassis include 6-slot VXIbus mainframes (CT-100C), 5-slot VXIbus mainframes (CT-310A), and modular 13-slot VXIbus mainframes (CT-400, pictured).
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
