VTI Instruments - SMX-2002 (Power) 10 channel, 16 A current SPDT switch
-
Large switching capacity in a small footprint
-
Switch up to 16 A current - highest in its class
-
High breakdown voltage (1,000 V rms between open contacts)
-
Ideal for applications such as high current/high power switching, AC line power switching, driving relays for industrial machinery, solenoid switching, and automotive engine control
-
Fail-safe interrupt inputs that can detect a fault condition automatically open up relays to their default state
The SMX-2002 is the only switch module in its class with the ability to switch up to 16A. Some applications include: AC line power switching, switching of DC or AC power supplies, control or driving relays for industrial machines (robotics, numerical control machines), automotive engine control, and solenoid switching. Since this module typically switches power to the UUT or interface, the SMX-2002 includes failsafe pins on the front panel which can be configured to open all relays when a failsafe signal is activated. This approach can instantly removes all power to the UUT or interface.
More Product Information
-
24-bit, delta-sigma ADC, simultaneous sampling
-
Programmable Sample Rate up to 128kSPS
-
Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
-
Voltage Excitation: 0.5V to 10V
-
Current Excitation: 0.46mA
-
2-Wire & 4-Wire Ohms/RTD
-
Bridge Zero Balancing
-
Built-In-Self-Test (BIST)
-
Strain Lead Wire Calibration
-
Shunt Calibration: 50kΩ, 100kΩ & External provided by User
-
TEDS Support
-
LXI Ethernet Interface
-
IEEE-1588 Synchronization
-
Power over Ethernet (PoE) or 10–50 V DC input
-
Built-in Parallel Data Streaming
-
Full-featured Embedded Web Interface
-
Compact 1U Half-rack Form Factor
-
Complete Test Solutions
-
Complete test solutions for emissions and immunity compliance testing of AC and DC powered products
-
-
Single & Three Phase Operation
-
Offers flexibility
-
-
Direct PC Bus Access
-
Provides high sampling rate and resolution for accurate measurements and high speed data transfers
-
-
PC based harmonic & flicker testing
-
provides real-time full color data display updates and continuous PASS/FAIL monitoring.
-
-
Supports Global Standards
-
Supports European and Japanese standards
-
-
Easy To Use Interface
-
Provides IEC test setup, data analysis, display, MS Word test reports, and data files are generated in MS Excel format
-
-
High resolution
-
Data storage to disk in for post-acquisition analysis and reporting
-
-
Single Step
-
Single Step and Fast Forward replay of recorded test data at 200 mSec
-
-
Simplifies test setup with inline operation and automated discovery
-
Tests across a wide range of protocols
-
Modifies real-world network traffic and CRCs
-
Triggers protocol analyzers or other test instruments at the error injection point
-
Automates regression testing through stored test cases
-
Combine up to 12 fail-safe building blocks, dual SPDT, SP4T, SP6T, or transfer switch in a compact 1U footprint
-
Front “pluggable” relays facilitate field maintenance
-
Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
-
Flexible API supports IVI and Linux development environments minimizing software investment
-
LXI Trigger Event implementation provides seamless test synchronization with external devices
-
Store up to 128 relay state configurations for quick recall, including an automatic power up state
-
Define exclude lists to avoid setting an undesirable configuration
-
Relay odometer tracks closures to facilitate preventative maintenance
-
Up to 96 differential channels per full rack mainframe
-
Constantly monitor input signals for fault conditions
-
Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths
-
Inputs can be masked, inverted, and combined to produce interrupts
-
Can be used as a time stamp module and as a digital I/O
-
Programmable debounce circuitry prevents erroneous readings
-
10 V and 100 V input ranges
-
On-board memory stores events with IEEE 1588 timestamps
-
Synchronize reading of input states with other scanned analog channels
-
Multi-mode AC Electronic Load
-
Flexible solution for a wide range of AC power test applications
-
-
3000 Watt Power Dissipation
-
Master / Auxiliary configurations for higher power and multi phase applications
-
-
50 to 350 V, 45 Hz to 440 Hz
-
Commercial, Military and Avionics applications
-
-
Programmable Crest & Power Factor
-
Test AC power products for real-world conditions
-
-
Built-in Measurements
-
Eliminates the need for additional test equipment in bench or ATE applications
-
-
Remote Control
-
IEEE-488 and RS232C Interface for automated test applications
-
-
Backward Compatible with L Series
-
Function and bus compatible with the California Instruments L Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Transient Programming
-
Test products for susceptibility to AC line disturbances
-
-
Built-in Measurements
-
Performs voltage, current, and power measurements
-
-
Advanced Features
-
Arbitrary waveform generation, harmonic analysis, GPIB interface are some of the available options
-
-
Interface
-
Standard USB & RS232C interface.
-
Optional GPIB & LAN available
-
-
CE Marked (400V input model ONLY)
-
Safe, reliable, and consistent operation
-
Key Features Lx Series
-
Backward Compatible
-
Compatible with HP6834B & iL Series AC Sources Function & bus compatible with the Agilent HP6834B & California Instruments iL Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Arbitrary Waveform Generator
-
Test products for harmonics susceptibility
-
-
Built-in Power Analyzer
-
Performs voltage and load current harmonic analysis and waveform acquisition
-
-
Standard IEEE-488, USB & RS232
-
Remote control interface for ATE system integration include
-
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries