• General purpose switching up to 300 V / 2 A 
• Easy to use end-to-end path level switching for simplified programming 
• Best bandwidth and crosstalk performance in its class 
• Can be mixed and matched to create application specific configurations 
• Ideal for general purpose switching of up to 300 V (AC/DC) or 2 A 
• Can be used to switch a common point to either power or ground (Form C) 
• Connect together using external wiring for flexible switch design 
• Easy to use configuration software facilitates end-to-end path-level switching for simplified programming

For next-generation broadband and multicarrier communication system, such as 5G mobile and broadcast satellites

• Built-in 5G measurement software supports efficient development and production
  • All-in-one 5G NR/V5G (sub-6 GHz/mmWave) coverage
  • High EVM performance due to wide dynamic range (EVM: <1%)
  • One-button dynamic-range optimization at EVM measurement
  • Multicarrier batch (all-at-once) analysis
  • Amplitude/phase/timing difference measurement for each carrier
• Maximum analysis bandwidth: 1 GHz
• Excellent amplitude and phase flatness performance
• Wide dynamic range measurement: >140 dB
• Long-term capture using large memory
• With PCIe/USB3.0 connector equipped
  • Transfers captured data to external PC at faster speed than 1000BASE-T

More than a calibration tool

• Calibration
• Validation
• Measurement
• Analysis

No one supports more VNA’s

• Support of more than 24 of the most common VNA’s

Tool for the novice

• Guided wizards and multimedia tutorials integrated
• Intelligence in setups

See "Specifications & Details" tab for more key features

• SPA available from 70KHz to 20/40/70/110/125/145 and 220GHz. Also available for banded configuration to 1.1THz.
• Dual SPA mode available: suitable for Mixers/Amplifier/ Harmonics /Spurious testing.
• SPA available on all ports. User can define which port to use as SPA port.
• Several detection types available in classical mode: Peak, minimum, RMS, Mean.
• Various math functions can be applied on SPA mode like Min hold/max hold/ user defined equations.
• Sources and receivers can be independently configured. Can be used as Tracking Generator.
• For units that have a dual source, a dual drive option is available. Support for external source control also possible.
• Phase synchronization for units with Dual source available. This feature allows users to control and configure the phase between the two sources.
• Source and receiver attenuator available with VNA can be activated in SPA mode. Recommendation to use option 62 (with attenuator on receiver side) for measuring the spectrum content of high-power devices.
• Software option: easy to install and upgrade existing user equipment.

Configurable and SWaP-C optimized with maximum storage capacity, processing power, and intelligence, our ruggedized, TAA-compliant BAM servers are the perfect solutions to accelerate and sustain ever-evolving applications

• Leading Performance CPUs - Supports dual Intel® 3rd, 4th & 5th Gen Xeon® SP CPUs with hardware-based encryption for enhanced compute and networking.
• High-end GPUs and FPGAs - Supports multiple double-wide, high-end Intel® and NVIDIA® GPUs and FPGAs to accelerate AI/ML/DL workloads at the edge.
• Fast NVMe SSDs - Supports up to 8 high-speed NVMe or 9 SAS/SATA SSDs to increase read/write speeds (FIPS 140-2/3 available).

• Support the most high-performance Camera Link cameras with available support for Full and 80-bit mode at up to 85 MHz 
• Perform deterministic image acquisition by way of the jitter-free Camera Link 2.1 interface 
• Maximize system compatibility with the choice of PCIe® 2.1 x1, x4 or x8 connectivity 
• Eliminate missed frames with ample onboard buffering and PCIe bandwidth 
• Optimize multi-camera applications via support for up to four Base or two Full/80-bit Camera Link cameras per board 
• Minimize space requirements and maximize PC compatibility through a half-length design with mini Camera Link connectivity for true single-slot operation 
• Improve and simplify system connectivity with Power-overCamera-Link (PoCL) support at extended cable lengths

• 2, 4 and 8 channel configurations
• 16-bit vertical resolution
• Sample Rate up to 12.32 GS/s with RF mode
• 16-bit vertical resolution.
• 4 Gpts waveform memory per channel
• Up to 5 Vpp Output Voltage and ±2.5 V Baseline Offset 50 Ohm

• Rugged, cast aluminum housing has an outer diameter of 8.4” (213mm) and an inner, working diameter of 6.1” (155mm). 
• The Medium Dome Light is available in a wide range of wavelengths including a 3 channel, RGB configuration. 
• Provides up to 59kLux at a 1” (25mm) standoff.